Items where Subject is "Mechanical Measurements"

Article

Ali, Zeeshan and Muthuraman, V and Rathnakumar, P and Gurusamy, P and Nagaral, Madeva (2023) Influence of B4C particle size on the mechanical behavior of A356 aluminium composites. Research on Engineering Structures and Materials. ISSN 21489807

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Karunakaran, K. and Venkateswar Reddy, M. (2022) Experimentally investigating cutting force reduction performance by nano-alumina particles enriched waste coconut oil Nano fluid in electric motor shaft manufacturing. Materials Today: Proceedings, 64. pp. 765-770. ISSN 22147853

Arravind, R. and Kaliappan, S. and Vijayananth, Suyamburajan and Patil, Pravin P. and Sathya Prakash, M. and Ramasamy, N. (2022) An investigation on mechanical properties of AA336/Al2O3 composites by Duralcan process. Materials Today: Proceedings, 62. pp. 1299-1302. ISSN 22147853

Arul Oli, A. and Dhanasekaran, C. (2023) A study related to product service systems (PSS), SERVQUAL and knowledge management system (KMS) – A review. Materials Today: Proceedings, 80. pp. 3579-3584. ISSN 22147853

Arunkumar, S and Baskaralal, V P M and Muthuraman, V (2017) Comparative Investigation on Modal analysis of LM25 Aluminium alloy with other Aluminim alloys using Finite element analysis software. IOP Conference Series: Materials Science and Engineering, 183. 012011. ISSN 1757-8981

Arunkumar, S and Muthuraman, V and Baskaralal, V P M (2017) Optimization of the Machining parameter of LM6 Alminium alloy in CNC Turning using Taguchi method. IOP Conference Series: Materials Science and Engineering, 183. 012024. ISSN 1757-8981

Arunkumar, S. and Dhanasekaran, C. and Muthuraman, V. and Vinod Kumar, T. (2021) Modelling and stress analysis of shaft used in hydraulic streeing pump. Materials Today: Proceedings, 37. pp. 2474-2477. ISSN 22147853

Arunkumar, S. and Siva Ramakrishna, Ch. and Alphin, M.S. and Muraliraja, R. and Vinod Kumar, T. and Vishwakarma, Bhaskar and Agrawal, Vandana and Yadav, Anil Singh (2023) Optimization of stirrer speed on mechanical properties of aluminium graphite stir cast. Materials Today: Proceedings. ISSN 22147853

Balajikrishnabharathi, A. and Suyamburajan, Vijayananth and Kaliappan, S. and Patil, Pravin P and Jayabalakrishnan, D. and Sathya Prakash, M. and Sivabalan, T. (2022) Study of mechanical properties on Nano metal matrix Composites: Duralcan process. Materials Today: Proceedings, 62. pp. 1282-1287. ISSN 22147853

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Ramasubramanian, S. (2020) Experimental studies on flow and heat transfer characteristics of secondary refrigerant-based CNT nanofluids for cooling applications. International Journal of Ambient Energy, 41 (3). pp. 285-288. ISSN 0143-0750

Bupesh Raja, V. K. and Parande, Gururaj and Kannan, Sathish and Sonawwanay, Puskaraj D. and Selvarani, V. and Ramasubramanian, S. and Ramachandran, D. and Jeremiah, Abishek and Akash Sundaraeswar, K. and Satheeshwaran, S. and Gupta, Manoj (2023) Influence of Laser Treatment Medium on the Surface Topography Characteristics of Laser Surface-Modified Resorbable Mg3Zn Alloy and Mg3Zn1HA Nanocomposite. Metals, 13 (5). p. 850. ISSN 2075-4701

Chandragowda, M. and Gnanavel, C. and Saravanan, D. and Stalin David, D. and Parthiban, R. and Rajesh, A.S. (2022) Consequence of silanee combination representative on the mechanical possessions of sugarcane bagasse and polypropylene amalgams. Materials Today: Proceedings, 56. pp. 1743-1751. ISSN 22147853

Chandran, Jishu and Manikandan, K. and Ganesh, R. and Baskar, S. (2022) Effect of nano-material on the performance patterns of waste cooking biodiesel fuelled diesel engine. International Journal of Ambient Energy, 43 (1). pp. 2226-2230. ISSN 0143-0750

Chandrasekaran, M. and Roy, Badal Dev and Saravanan, R. (2019) Challenges in Turbomatching - An Ample Review. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Chaudhari, Sharad S. and Pundkar, A. H. and Giri, Jayant and Sathish, T. and Daryapurkar, A. S. and Chadge, Rajkumar and Parthiban, A. (2024) Optimizing air conditioning efficiency: Utilizing nano-oxides ZnO, CuO, and TiO2 with traditional and alternative refrigerants in medium temperature range cooling systems. Interactions, 245 (1). ISSN 3005-0731

Ganesh, K. and Chandrasekaran, .M. Manufacturing of Jatropha and calophyllum inophyllum based complete biodiesel and investigation of overall performance in an unmodified diesel engine at high idling situations. Manufacturing of Jatropha and calophyllum inophyllum based complete biodiesel and investigation of overall performance in an unmodified diesel engine at high idling situations.

Girimurugan, R. and Pugazhenthi, R. and Maheskumar, Pon. and Suresh, T. and Vairavel, M. (2021) Impact and hardness behaviour of epoxy resin matrix composites reinforced with banana fiber/camellia sinensis particles. Materials Today: Proceedings, 39. pp. 373-377. ISSN 22147853

Gnanavel, C and Saravanan, R and Chandrasekaran, M and Jayakanth, J J (2017) Improvement of Productivity in TIG Welding Plant by Equipment Design in Orbit. IOP Conference Series: Materials Science and Engineering, 183. 012020. ISSN 1757-8981

Gnanavel, C and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Case Study of Cycle Time Reduction by Mechanization in Manufacturing Environment. IOP Conference Series: Materials Science and Engineering, 183. 012023. ISSN 1757-8981

Gnanavel, C and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Restructured review on Electrical Discharge Machining - A state of the art. IOP Conference Series: Materials Science and Engineering, 183. 012015. ISSN 1757-8981

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and circular fin insert in double tube heat exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 934-939. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2019) Intensification of Heat Transfer in a Double Tube Heat Exchanger with Nano-Fluids and Trapezoidal Cut Twisted Tape - A Numerical Study. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Gopal, P and . Bupesh Raja2, V K and Chandrasekaran1, M and Dhanasekaran1, C WEAR STUDY ON HYBRID NATURAL FIBER EPOXY COMPOSITE MATERIALS USED AS AUTOMOTIVE BODY SHELL. WEAR STUDY ON HYBRID NATURAL FIBER EPOXY COMPOSITE MATERIALS USED AS AUTOMOTIVE BODY SHELL.

Gopal, P and Bupesh Raja, V K and Chandrasekaran, M and Dhanasekaran, C (2017) Woven Hybrid Composites - Tensile and Flexural Properties of Jute Mat Fibres with Epoxy Composites. IOP Conference Series: Materials Science and Engineering, 183. 012001. ISSN 1757-8981

Gopalakrishnan, T and Saravanan, R (2017) Cast Off expansion plan by rapid improvement through Optimization tool design, Tool Parameters and using Six Sigma’s ECRS Technique. IOP Conference Series: Materials Science and Engineering, 183. 012016. ISSN 1757-8981

Hemadri, Kadapa and Ajith Arul Daniel, S. and Parthiban, A. and Vinod kumar, T. (2022) Investigation on the response parameters in electric discharge machining of developed aluminium metal matrix composites. Materials Today: Proceedings, 68. pp. 1214-1218. ISSN 22147853

Immanuel Durai Raj, J. and Arun Vasantha Geethan, K. and John Rajan, A. and Vijay Ananth, S. (2023) Characterization of epoxy resin based banana fiber reinforced composite with waste CD powder filler. Materials Today: Proceedings, 90. pp. 19-23. ISSN 22147853

Jayakanth, J J and Ramasubramanian, S and Chandrasekaran, M and Manavalan, S (2017) Investigation of solar water heater by using flat plate collector and evacuated tubes. IOP Conference Series: Materials Science and Engineering, 183. 012035. ISSN 1757-8981

Jeevahan, Jeya and Chandrasekaran, M. (2019) Nanoedible films for food packaging: a review. Journal of Materials Science, 54 (19). pp. 12290-12318. ISSN 0022-2461

Jerin, A and Karunakaran, K (2023) Machinability investigation and optimizing process parameters in ECM of stainless steel −12X18H10T for minimizing surface roughness. Materials Today: Proceedings, 81. pp. 443-448. ISSN 22147853

Jerin, A. and Karunakaran, K. (2021) Advances in simulation modeling and analysis of curvilinear electro chemical machining process. Materials Today: Proceedings, 37. pp. 1588-1591. ISSN 22147853

Jesumanen, J. and Chandrasekaran, M. and Aurtherson, P. Babu (2023) Mechanical, wear, and low cycle fatigue behaviour of rice husk ash Si3N4 and pineapple/basalt Fiber–reinforced polyester composite. Biomass Conversion and Biorefinery. ISSN 2190-6815

Joseph Irudaya Raja, S. and Sivaganesan, S. (2021) Experimental investigation on wear properties with micro-structure behavior of arecanut reinforced polymer composite material. Materials Today: Proceedings, 39. pp. 682-689. ISSN 22147853

Joseph Irudaya raja, S and Vinod Kumar, T and Sridhar, R and Vivek, P (2017) Experimental Investigation of Thermal Properties in Glass Fiber Reinforced with Aluminium. IOP Conference Series: Materials Science and Engineering, 183. 012005. ISSN 1757-8981

Kamatchi, R. Muthu and Muraliraja, R. and Sabari Bharathi, C. and Sathish, T. and Sathyaraj, S. and Kumar, Leevesh and Senthilkumar, N. (2023) Preparation of Nanosize Bone Powder from Waste and Development of Al Composite through Squeeze Casting Process. Journal of Nanomaterials, 2023. pp. 1-11. ISSN 1687-4110

Karikalan, L. and Chandrasekaran, M. (2017) Performance and pollutants analysis on diesel engine using blends of Jatropha Biodiesel and Mineral Turpentine as fuel. International Journal of Environmental Science and Technology, 14 (2). pp. 323-330. ISSN 1735-1472

Karunakaran, K and Chandrasekaran, M MACHINEABILITY STUDY ON DIE SINKING EDM OF INCONEL 800 WITH ELECTROLYTE COPPER ELECTRODE. MACHINEABILITY STUDY ON DIE SINKING EDM OF INCONEL 800 WITH ELECTROLYTE COPPER ELECTRODE.

Karunakaran, K. and Chandrasekaran, M. and Yuan, H.L. and Agarwal, R.K. and Tandon, P. and Wang, E.X. (2017) Influence of Process Parameters in n-PMEDM of Inconel 800 with Electrode and Coated Electrodes. MATEC Web of Conferences, 95. 02002. ISSN 2261-236X

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) CFD Analysis of Twisted Tape Heat Exchanger with Twist Ratio of 3 in Metallic and Ceramic Nano Fluids. International Journal of Vehicle Structures and Systems, 12 (3). ISSN 0975-3060

Koparde, Anand and Mithra, Nithin and Ahankari, Sandeep (2021) Numerical and experimental analysis of torsional stress of traditional and modified steering yoke. Materials Today: Proceedings, 46. pp. 7099-7104. ISSN 22147853

Kukanur, Vijayendra and Ajith Arul Daniel, S. and Sivaganesan, S. and Algur, Veerabhadrappa (2022) Mechanical properties of silicon nitride fortified aluminium based metal matrix composites – A review. Materials Today: Proceedings, 68. pp. 1733-1736. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C. (2020) Behaviour Of Cottonseed Oil Blended With Single-Walled Carbon Nanotubes In, Direct Injection Single Cylinder Diesel Engine. Materials Today: Proceedings, 24. pp. 2157-2162. ISSN 22147853

Kumar, Patnala Padma and Ruban, M. and Daniel, Ajith Arul and Pugazhenthi, R. and Santhosh, K. and V, Kavimani (2023) Influence of Control Parameters during Drilling of Aluminum Reinforced with HNT Hybrid Matrix Composites. Advances in Materials Science and Engineering, 2023. pp. 1-10. ISSN 1687-8434

Kumar, R. and Hynes, N. Rajesh Jesudoss (2021) Prediction and optimization of surface roughness in thermal drilling using integrated ANFIS and GA approach. Engineering Science and Technology, an International Journal, 23 (1). pp. 30-41. ISSN 22150986

Kumar, R. and Sivaganesan, S. and Senthamaraikannan, P. and Saravanakumar, S. S. and Khan, Anish and Ajith Arul Daniel, S. and Loganathan, L. (2022) Characterization of New Cellulosic Fiber from the Bark of Acacia nilotica L . Plant. Journal of Natural Fibers, 19 (1). pp. 199-208. ISSN 1544-0478

Madhanagopal, A. and Arunkumar, S. and Jagatheesan, K. and Adinarayanan, A. (2024) Investigation on mechanical and thermal properties of clay brick additions with sugarcane bagasse ash and nanoparticles. Biomass Conversion and Biorefinery, 14 (17). pp. 21475-21483. ISSN 2190-6815

Manimaran, A. and Muthuraman, V. (2017) Interaction between tolerance levels of people and adoption of green supply chain management practices: an empirical case study in the domestic appliances industry. International Journal of Environment, Workplace and Employment, 4 (3). p. 205. ISSN 1741-8437

Mohan, E. and Anbuchezhiyan, G. and Pugazhenthi, R. and Prakash, F. Peter (2023) Wear Behavior of Brass Based Composite Reinforced with SiC and Produced by Stir Casting Process. Materials Research, 26. ISSN 1516-1439

Mohan Kumar,, G. and Dhanasekaran, C. Port Injection of Hydrogen Gas in Direct Injection Diesel Engine using DEE as Ignition Enhancer. Port Injection of Hydrogen Gas in Direct Injection Diesel Engine using DEE as Ignition Enhancer.

Murali, S and Jothi Prakash, V M and Vishal, S (2017) Modeling and Prototyping of Automatic Clutch System for Light Vehicles. IOP Conference Series: Materials Science and Engineering, 183. 012019. ISSN 1757-8981

Murali, S. and Pugazhendhi, S. and Muralidharan, C. (2016) Integration of IPA and QFD to assess the service quality and to identify after sales service strategies to improve customer satisfaction – a case study. Production Planning & Control, 27 (5). pp. 394-407. ISSN 0953-7287

Muthu Kamatchi, R. and Muraliraja, R. (2023) Optimization of squeeze casting process parameters for the production of Al composite reinforced with bone powder. Materials Today: Proceedings. ISSN 22147853

Muthukumaran, R. and Daniel, Ajith Arul and Nithya, M. and Parthiban, A. and Sathish, T. and Giri, Jayant and Al-Lohedan, Hamad A. (2024) Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite. AIP Advances, 14 (4). ISSN 2158-3226

Muthuraman, V and Arunkumar, S (2017) Experimental evaluation of machining parameters in machining of 7075 aluminium alloy with cryogenic liquid nitrogen coolant. IOP Conference Series: Materials Science and Engineering, 183. 012012. ISSN 1757-8981

Muthuraman, V. and Arunkumar a, S. and Baskarlal, V. P. M. MODELLING AND SIMULATION ANALYSIS OF METAL CASTINGS. MODELLING AND SIMULATION ANALYSIS OF METAL CASTINGS.

Padmanabhan, S and Chandrasekaran, M and Ganesan, S and Khan patan, Mahamed Naveed and Navakanth, Polina (2017) Optimal Solution for an Engineering Applications Using Modified Artificial Immune System. IOP Conference Series: Materials Science and Engineering, 183. 012025. ISSN 1757-8981

Padmanabhan, S and Rajasekar, S and Ganesan, S and Saravanan, S and Chandrasekaran, M PERFORMANCE AND EMISSION ANALYSIS ON CI ENGINE USING SOAPNUT OIL AS BIOFUEL. PERFORMANCE AND EMISSION ANALYSIS ON CI ENGINE USING SOAPNUT OIL AS BIOFUEL.

Padmanabhan, S. and Joel, C. and Mahalingam, S. and Deepak, J. R. and Baskar, S. and Ruban, M. (2023) Effects of Flex Fuel in Light Duty Power Generators on the Environment and Circular Bio-Economy. Nature Environment and Pollution Technology, 22 (2). pp. 879-886. ISSN 23953454

Parthiban, A and Chandrasekaran, M and Sathish2, S and Vinod Kumar1, T COMPREHENSIVE ANALYSIS OF MILLING PARAMETERS ON ALUMINIUM ALLOYS. COMPREHENSIVE ANALYSIS OF MILLING PARAMETERS ON ALUMINIUM ALLOYS.

Parthiban, A and Pugazhenthi, R and Ravikumar, R and Vivek, P (2017) Experimental Investigation of Turning Parameters on AA 6061-T6 Material. IOP Conference Series: Materials Science and Engineering, 183. 012013. ISSN 1757-8981

Parthiban, A and Sathish, S and Chandrasekaran, M (2017) Optimization of Abrasive Water Jet Cutting Parameter for AISI 316L Stainless Steel Sheet. Journal of Applied Fluid Mechanics, 10 (SI). ISSN 17353572

Parthiban, A and Sathish, S and Chandrasekaran, M and Ravikumar, R (2017) Optimization of CO 2 laser cutting parameters on Austenitic type Stainless steel sheet. IOP Conference Series: Materials Science and Engineering, 183. 012022. ISSN 1757-8981

Parthiban, A. and Chandrasekaran, M. and Muthuraman, V. and Sathish, S. (2018) Optimization of CO2 Laser Cutting of Stainless Steel Sheet for Curved Profile. Materials Today: Proceedings, 5 (6). pp. 14531-14538. ISSN 22147853

Parthiban, Alagesan and Sathish, Saravanan and Chandrasekaran, M Fuzzy logic based modeling of CO2 laser cutting for stainless steel sheet. Fuzzy logic based modeling of CO2 laser cutting for stainless steel sheet.

Prabhu Deva, Madan and Parthiban, A. and Theerka Tharisanan, R. and Ashok Raj, R. and Singh, J. and Bhattu, M. (2024) Investigate the Mechanical properties of Al7075-MoS 2 Composite via Powder Metallurgy. E3S Web of Conferences, 509. 03006. ISSN 2267-1242

Prabhu Deva, Madhan and Parthiban, A. and Radha Krishnan, B. and Haile, Adisu and Degife, Wubishet and Faris, Waleed Fekry (2022) Investigation of Wear Behaviour and Mechanical Properties of Titanium Diboride Reinforced AMMC Composites. Advances in Materials Science and Engineering, 2022. pp. 1-9. ISSN 1687-8434

Prajul Raj, P. and Sridhar, R. and Pugazhenthi, R. and Anbuchezhiyan, G. and Ganesh, M. (2023) Investigating the mechanical properties of tungsten carbide metal matrix composites with Al 6061. Materials Today: Proceedings. ISSN 22147853

Priyankar, D. and Ali, Zeeshan and Nagaral, Madeva and Rathnakumar, P. and Muthuraman, V. and Umar, M.D. (2022) Microstructure and evolution of mechanical properties of Cu-Sn alloy with graphite and nano zirconium oxide particulates. Materials Today: Proceedings, 52. pp. 296-300. ISSN 22147853

Raj, J. Immanuel Durai and Durairaj, R. B. and Ananth, S. Vijay and Barmavatu, Praveen (2024) Experimental investigation of the effect of e‐waste fillers on the mechanical properties of Kenaf woven fiber composites. Environmental Quality Management, 34 (1). ISSN 1088-1913

Raja, R and Parthiban, A and Jeyakumar, S and Radha Krishnan, B (2022) Investigation of mechanical properties of friction stir welding aluminium alloy AA7475-T651 and AA2219-O. Materials Today: Proceedings, 60. pp. 1421-1423. ISSN 22147853

Rajasekar, K and Pugazhenthi, R and Selvaraju, A and Manikandan, T and Saravanan, R (2017) Effect on air quality and flow rate of fresh water production in humidification and dehumidification system. IOP Conference Series: Materials Science and Engineering, 183. 012032. ISSN 1757-8981

Ramasamy, Muthukumaran and Daniel, Ajith Arul and Nithya, M. (2021) Investigation on surface roughness of aluminium (Al7050/TiC/BN) hybrid metal matrix. Materials Today: Proceedings, 46. pp. 852-856. ISSN 22147853

Ramasubramanian, S and Raja, V K Bupesh (2017) Review on Enhanced Heat Transfer Techniques using Modern Technologies for 4S Air Cooled Engines. IOP Conference Series: Materials Science and Engineering, 197. 012019. ISSN 1757-8981

Ravindran, Prabu and Kumar, Kumarappan Mani and Rangasamy, Selvam and Kumar, Kuttynadar Rajammal Vijaya (2024) Plain Kevlar and a CNT-reinforced Kevlar epoxy polymer composite: Comparative study of its mechanical, low velocity and ballistic impact properties. Iranian Polymer Journal, 32 (2). pp. 239-249. ISSN 1026-1265

Roy, Badal Dev and Saravanan, R. and Chandrasekaran, M. (2019) Dynamic Load Test Based Data-Logger Turbo matching of B60J67 A58N70 and A58N75 Turbochargers for Tata 497 TCIC-BS III Engine - An Investigation. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

S, Rajkumar and S, Loganathan and R, Venkatesh and B S, Madhan Prabhu Deva (2021) Investigate of Wear Behaviour and Mechanical Properties of Titanium Diboride Reinforced AMMC Composites. Journal of New Materials for Electrochemical Systems, 24 (1). pp. 254-260. ISSN 14802422

S., Anulekshmi (2020) Comprehensive Study and Research on Wireless Sensor Network and Internet of Things for Precision Agriculture. Journal of Advanced Research in Dynamical and Control Systems, 24 (4). pp. 150-158. ISSN 1943023X

SAMBANDAM, Padmanabhan and T, Vinod Kumar and MAHALİNGAM, S and S, Ganesan and K, Giridharan (2023) Sustainability improvement by utilizing polymer waste as an energy source for a diesel engine with alcohol additives. Environmental Research and Technology, 6 (1). pp. 35-45. ISSN 2636-8498

Saravanan, R. and Malladi, Avinash and Amuthan, T. and Aneesh, V.N. and Jerin, A. and Anbuchezhiyan, G. and Saikumar, A. (2023) Mechanical characterization of friction stir welded dissimilar aluminium alloy using Taguchi approach. Materials Today: Proceedings. ISSN 22147853

Saravanan, R. and Malladi, Avinash and Gopalakrishnan, T. and Manikandan, R. and Jagadeeswaran, P. and Anbuchezhiyan, G. and Veeranjaneyulu, K. (2023) Investigating concentration of nano-particles influence in Molybdenum disulfide waste cooking oil nanofluid for machining of SAE 1144 in surface finish enhancement. Materials Today: Proceedings. ISSN 22147853

Sathish, T. and Jayaprakash, J. and Senthil, P.V. and Saravanan, R. (2017) Multi period disassembly-to-order of end of life product based on scheduling to maximize the profit in reverse logistic operation. FME Transactions, 45 (1). pp. 172-180. ISSN 1451-2092

Senthil Babu, S. and Dhanasekaran, C. and Parthiban, A. and Vasudevan, N. and Mekonnen, Addisalem and Xia, Ao (2023) Analysis of MRR, Thrust Force, and Torque in Drilling Al/BN/Al2O3 Composites using Hybrid Grey–Taguchi Technique. Journal of Nanomaterials, 2023. pp. 1-8. ISSN 1687-4110

Shakarappa, Raja and Arul Peter, A. and Rathna Kumar, P. and Mallikarjuna, M.V. and Padmanabhan, S. (2023) Microstructure mechanical behavior of Cu-Sn alloy reinforced with Al2o3 and Graphene metal matrix composite. Materials Today: Proceedings, 92. pp. 1122-1128. ISSN 22147853

Sivabalan, S. and Sridhar, R. and Sathishkumar, G. and Prakash, M. (2019) Mechanical Behaviour of Friction Stir Welded Dissimilar Aluminium Alloy AA 6082 and AA 2014. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Sivaganesan,, S and Chandrasekaran,, M and Ruban,, D The Influence of Bio Additive on the Various Compression Ratio with Diesel and Mahua Methyl Ester Biodiesel in DI Diesel Engine. The Influence of Bio Additive on the Various Compression Ratio with Diesel and Mahua Methyl Ester Biodiesel in DI Diesel Engine.

Sravya, Navuluri Padma and Sivaganesan, S. and Venkatesh, R. and Manikandan, R. (2023) Effect of alkaline treatment on mechanical properties of palmyra and S-glass fiber reinforced epoxy nanocomposites. Archives of Civil and Mechanical Engineering, 23 (2). ISSN 1644-9665

Sridhar, R and Chandrasekaran, M and Sriramya, C and Page, Tom (2017) Optimization of heterogeneous Bin packing using adaptive genetic algorithm. IOP Conference Series: Materials Science and Engineering, 183. 012026. ISSN 1757-8981

Sridhar, R and Chandrasekaran, R M and Sriramya, P. A review on application of 1D, 2D and 3D bin packing Techniquies. A review on application of 1D, 2D and 3D bin packing Techniquies.

Thendral Selvam, P. and Pugazhenthi, R. and Dhanasekaran, C. and Chandrasekaran, M. and Sivaganesan, S. (2021) Experimental Investigation on the Frictional Wear Behaviour of TiAlN Coated Brake Pads. Materials Today: Proceedings, 37. pp. 2419-2426. ISSN 22147853

VettumPerumal, Sundar and Suyamburajan, VijayAnanth and Chidambaranathan, Vettivel Singaravel and Nelson, Leema (2023) Characterization of Microstructure and Mechanical Behaviour in Activated Tungsten Inert Gas Welded Dissimilar AA Joint of AA 5083 and AA 6061 Alloys. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Vijaya Ramnath, B and Sharavanan, S and Jeykrishnan, J (2017) Optimization of process parameters in drilling of fibre hybrid composite using Taguchi and grey relational analysis. IOP Conference Series: Materials Science and Engineering, 183. 012003. ISSN 1757-8981

Vinod Kumar, T and Chandrasekaran, M and Santhanam, V and Sudharsan, V D (2017) Effect of Coupling Agent on Mechanical Properties of Palm Petiole Nanofiber Reinforced Composite. IOP Conference Series: Materials Science and Engineering, 183. 012006. ISSN 1757-8981

Vinod Kumar, T and Chandrasekaran, M and Santhanam, V and Udayakumar, N (2017) Characterization of Nylon 6 Nano Fiber/E-Glass Fiber Reinforced Epoxy Composites. IOP Conference Series: Materials Science and Engineering, 183. 012002. ISSN 1757-8981

Vinod Kumar, T. and Chandrasekaran, M and Santhanam2, V. CHARACTERISTICS ANALYSIS OF COCONUT SHELL HUSK REINFORCED POLYMER COMPOSITES. CHARACTERISTICS ANALYSIS OF COCONUT SHELL HUSK REINFORCED POLYMER COMPOSITES.

Vivek, P and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Critical Machine Based Scheduling -A Review. IOP Conference Series: Materials Science and Engineering, 183. 012027. ISSN 1757-8981

Vivek, P and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Heuristic for Critical Machine Based a Lot Streaming for Two-Stage Hybrid Production Environment. IOP Conference Series: Materials Science and Engineering, 183. 012030. ISSN 1757-8981

Book Section

Kumar, Indradeep (2022) Synthesis and characterization of magnetite nanomaterials blended sheet with single-walled carbon nanotubes. In: Design, Fabrication, and Characterization of Multifunctional Nanomaterials. Elsevier, pp. 205-221.

Conference or Workshop Item

Thirupathy, Maridurai and Vadivel, Muthuraman and Subbiah, Thirugnanam and Pathinettampadian, Gurusamy (2024) Experimental Investigation on the Impact of Tungsten Carbide Reinforcement on the Mechanical Properties of Sisal-Fiber-Reinforced Composites. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).

Vemanaboina, Harinadh and Ananda, K. Eriki and Majid, M. S. Abdul and Naidu, B. Vishnu Vardhana and Pugazhenthi, R. (2023) Influence of pre-heating technique on the titanium alloy for machinability using mill insert. In: INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS SCIENCE, STRUCTURES, AND MANUFACTURING, 27–28 May 2022, Chittoor, India.