Items where Subject is "Manufacturing Technology"

Article

Ahmed Ghias, Siddique and Vijaya Ramnath, B. and Elanchezhian, C. and Siddhartha, D. and Ramanan, N. (2019) Wear analysis of Sintered Al-B4C Composite. Materials Today: Proceedings, 16. pp. 481-487. ISSN 22147853

Arul Peter, A. and Chandrasekaran, M. and Prakash, P. and Kumar, T. Vinod and Vivek, P. (2020) Experimental investigation of a spark ignition engine using blends of biogas. International Journal of Ambient Energy, 41 (4). pp. 462-465. ISSN 0143-0750

Arunkumar, D. and Ramu, M. and Murugan, R. and Kannan, S. and Arun, S. and Baskar, Sanjeevi (2020) Investigation of heat transfer of wall with and without using phase change material. Materials Today: Proceedings, 33. pp. 2646-2650. ISSN 22147853

D., Vivekanandan and M., Sakthivel and S., Srinivasa Moorthy and S., Ajith Arul Daniel (2019) Fabrication and characterization of TiO 2 particulate filled agave Americana fiber-reinforced polyester resin composites. Pigment & Resin Technology, 48 (6). pp. 533-539. ISSN 0369-9420

Jeya Jeevahan, J. and Chandrasekaran, M. and Venkatesan, S.P. and Sriram, V. and Britto Joseph, G. and Mageshwaran, G. and Durairaj, R.B. (2021) Scaling up difficulties and commercial aspects of edible films for food packaging: A review. Trends in Food Science & Technology, 100. pp. 210-222. ISSN 09242244

Karunakaran, K and Chandrasekaran, M (2017) Experimental Investigation Nano Particles Influence in NPMEDM to Machine Inconel 800 with Electrolyte Copper Electrode. IOP Conference Series: Materials Science and Engineering, 197. 012068. ISSN 1757-8981

Karunakaran, K. and Pugazhenthi, R. and Anbuchezhiyan, G. and Saravanan, R. and Venkateswar Reddy, M (2022) Experimental investigations on synthesis and characterization of tamarind seed powder reinforced Bio- composites. Materials Today: Proceedings, 64. pp. 760-764. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C. (2019) Computational Modelling Of Nano-Composites (Single Walled Carbon Nanotubes) For Engine. Materials Today: Proceedings, 18. pp. 4210-4216. ISSN 22147853

Kumar, R. and Jesudoss Hynes, N. Rajesh (2019) Thermal drilling processing on sheet metals: A review. International Journal of Lightweight Materials and Manufacture, 2 (3). pp. 193-205. ISSN 25888404

Kumar, R. and Jesudoss Hynes, N. Rajesh and Pruncu, Catalin Iulian and Jennifa Sujana, J. Angela (2019) Multi-objective optimization of green technology thermal drilling process using grey-fuzzy logic method. Journal of Cleaner Production, 236. p. 117711. ISSN 09596526

M. Ruban et al.,, M. Ruban et al., (2018) Experimental Investigation on Straight Through Solar Salt Water Desalination System Analysis in Different PCM Materials. International Journal of Mechanical and Production Engineering Research and Development, 8 (3). pp. 67-80. ISSN 2249-6890

Malladi, Avinash and Karunakaran, K. and Saravanan, R. and Asres, Yalew and Ares, Alicia E. (2022) Material Behaviour of Three Blade Propeller Using Metal Additive Manufacturing Techniques. Advances in Materials Science and Engineering, 2022. pp. 1-7. ISSN 1687-8434

Niranjan, Raja R. and Junaid Kokan, S. and Sathya Narayanan, R. and Rajesh, S. and Manickavasagam, V.M. and Ramnath, B. Vijaya (2013) Fabrication and Testing of Abaca Fibre Reinforced Epoxy Composites for Automotive Applications. Advanced Materials Research, 718-72. pp. 63-68. ISSN 1662-8985

Prabhu, P. and Chokkalingam, V. and Arunkumar, S. and Perumal, Prakash (2024) The investigation on mechanical, thermal conductivity and water absorption characteristics of coir fiber-reinforced vinyl ester biocomposites. Biomass Conversion and Biorefinery. ISSN 2190-6815

Pugazhenthi, Rajagopal and Saravanan, R and Chandrasekaran, M and Franklin Issac, R. Optimization of wheel axle plant manufacturing environment by simulation. Optimization of wheel axle plant manufacturing environment by simulation.

Rajesh, S. and Saravanan, R. and Sekar, C.B. and Gnanavel, C. and Malladi, Avinash and Nagarathi, D.K. (2022) Comparing green Machining and clean technology based Machining for tool wear reduction in Machining SAE 1045 steel. Materials Today: Proceedings, 62. pp. 1308-1313. ISSN 22147853

Ramnath, B. Vijaya and Kumar, C. Suresh and Mohamed, G. Riyaz and Venkataraman, K. and Elanchezhian, C. and Sathish, S. (2014) Analysis of Occupational Safety and Health of Workers by Implementing Ergonomic Based Kitting Assembly System. Procedia Engineering, 97. pp. 1788-1797. ISSN 18777058

Ramnath, B. Vijaya and Venkataraman, K. and Venkatram, Selvaraj and Thomas, Sohil and Maheshwaran, Muthukumarasamy and Dinesh, N. (2014) Powered Two-Wheeler with Integrated Safety Using Recurdyn Multi-Body Dynamics. Applied Mechanics and Materials, 591. pp. 193-196. ISSN 1662-7482

Ramya, G. and Chandrasekaran, M. (2014) Shuffled frog leaping algorithm approach to employee timetabling and job shop scheduling. International Journal of Internet Manufacturing and Services, 3 (3). p. 178. ISSN 1751-6048

Ramya, G. and Chandrasekaran, M. (2014) Shuffled frog leaping algorithm approach to employee timetabling and job shop scheduling. International Journal of Internet Manufacturing and Services, 3 (3). p. 178. ISSN 1751-6048

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. (2024) Flexural properties of jute/kenaf/glass fibre reinforced nano-composite. Interactions, 245 (1). ISSN 3005-0731

Shanmugavel, P. and Bhaskar, G. B. and Chandrasekaran, M. (2014) Determination of Stress Intensity Factors and Fatigue Characteristics of Al-SiC Composite Material and Al-SiC Functionally Graded Material by Simulation. International Review of Mechanical Engineering (IREME), 8 (6). p. 1017. ISSN 1970-8734

Sivabalan, S. and Sridhar, R. and Sathishkumar, G. (2022) Study on mechanical behaviour of friction stir welded 6082-T6 aluminium alloys. Materials Today: Proceedings, 69. pp. 944-949. ISSN 22147853

Sivabalan, S. and Sridhar, R. and Sathishkumar, G. and Prakash, M. (2019) Mechanical Behaviour of Friction Stir Welded Dissimilar Aluminium Alloy AA 6082 and AA 2014. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Sonawane, Pavankumar Ravindra and Chandrasekaran, M (2021) Investigation of gear pitting defect using vibration characteristics in a single-stage gearbox. The International Journal of Electrical Engineering & Education, 57 (3). pp. 272-278. ISSN 0020-7209

Sudhagar, S. and Sakthivel, M. and Ajith Arul Daniel, S. (2021) Application of image processing to radiographic image for quantitative assessment of friction stir welding quality of aluminium 2024 alloy. Measurement, 152. p. 107294. ISSN 02632241

Udaiyakumar, K.C. and Chandrasekaran, M. (2014) Application of Firefly Algorithm in Job Shop Scheduling Problem for Minimization of Makespan. Procedia Engineering, 97. pp. 1798-1807. ISSN 18777058

Udayakumar, M. and Sivaganesan, S. and Sivamani, S. (2022) Performance and emissions of lemon peel oil biodiesel powered single cylinder direct injection diesel engine loaded with ceria nanoparticles additives and stabilized zirconia coating. Materials Today: Proceedings, 66. pp. 1994-2000. ISSN 22147853

Vairavel, M. and Pughazhenthi, R. and Girimurugan, R. and Vinothkumar, S. and N., Poornachandiran (2021) Effects of wear characterization analysis of the friction stir welded joints in aluminum alloy Al3116-Cu and A384 - Cu. Effects of Wear Characterization Analysis of the Friction Stir Welded Joints in Aluminum Alloy Al3116-Cu and A384 - Cu. 020112.

Vijaya Ramnath, B. and Manickavasagam, V.M. and Elanchezhian, C. and Vinodh Krishna, C. and Karthik, S. and Saravanan, K. (2014) Determination of mechanical properties of intra-layer abaca–jute–glass fiber reinforced composite. Materials & Design, 60. pp. 643-652. ISSN 02613069

Vijayaraghavan, P. and Janakiraman, V. and Surulivel rajan, T. and Logesh, K. and Rajiv Gandhi, N. and Gnanavel, C. and Sathi, G. (2022) Analysis of titanium coated silencer exhaust gas emission in automobile vehicle using artificial neural network. Materials Today: Proceedings, 69. pp. 732-738. ISSN 22147853

Yaduwanshi, Deepak Kumar and Rao, Chennu Rama Mohan and Naidu, S. C. V. Ramana Murty and Sakharwade, Sanjay G. and Sharma, Sumit and Khalkar, V. and Baskar, S. and Kaliyaperumal, Gopal (2024) Thermal evaluation of aluminum welding: a comparative study of friction stir welding (FSW), plasma-fsw, and tungsten inert gas (TIG)-FSW techniques. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (8). pp. 5501-5513. ISSN 1955-2513

Book Section

Arthur Jebastine Sunderraj, D. and Ananthapadmanaban, D. and Arun Vasantha Geethan, K. and Vijayananth, S. (2019) Correlation Between Mechanical Properties and Microstructure of Fe-Ti-Zn Alloys Fabricated by Powder Metallurgy. In: Advances in Micro and Nano Manufacturing and Surface Engineering Proceedings of AIMTDR 2018. Springer, pp. 319-327.

Kumudham, R. and Sathish Kumar, P. and Rajendran, V. and Jagan Mugesh, M. S. and Charan Raj, U. (2022) Multiresolution Representation of SONAR Pipeline Image Using Pyramidal Transforms. In: Proceedings of International Conference on Power Electronics and Renewable Energy Systems. Springer, pp. 479-489.

Suyamburajan, Vijay Ananth and Jayaseelan, V. and Chandramohan, P. and Kumar, R. (2022) Mechanical Properties of Nanometal Matrix Composites Produced by Duralcan Process. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1121-1128.

Conference or Workshop Item

Daniel, S. Ajith Arul and Velu, P. Shenbaga and Kumar, R. and Ananth, S. Vijay (2021) Numerical analysis of single cylinder engine crankshaft. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

Murugan, Suganiya and Selvaraj, Jerritta and Sahayadhas, Arun (2019) Analysis of Different Measures to Detect Driver States: A Review. In: 2019 IEEE International Conference on System, Computation, Automation and Networking (ICSCAN), Pondicherry, India.