Items where Subject is "Fluid Mechanics"

Article

Ahmed Ghias, Siddique and Ramnath, Vijaya and Elanchezhian, C. and Siddhartha, D. and Ramanan, N. (2019) Analysis of The Friction Welding Mechanism of Low Carbon Steel –Stainless Steel And Aluminium – Copper. Materials Today: Proceedings, 16. pp. 766-775. ISSN 22147853

Babu, S Senthil and Dhanasekaran, C and Anbuchezhiyan, G and Palani, Kumaran (2022) Parametric analysis on drilling of aluminium alloy hybrid composites reinforced with SIC/WC. Engineering Research Express, 4 (2). 025036. ISSN 2631-8695

Baskaran, P. and Saravanan, R. and Vignesh, M. and Prasanna, N. and Gnanavel, C. and Nagarathi, D.K. and Gopalakrishnan, T. (2022) Influence of molybdenum disulfide particles’ concentration on waste cooking oil nano fluid coolant in cutting force reduction on machining SAE 1144 steel. Materials Today: Proceedings, 62. pp. 1969-1972. ISSN 22147853

Jeevahan, Jeya and Chandrasekaran, M. and Britto Joseph, G. and Poovannan, A. and Sriram, V. (2019) Experimental investigation of the influence of isobutanol addition on engine performance and emissions of a direct ignition diesel engine fuelled by biodiesel blends derived from waste vegetable oil. International Journal of Ambient Energy, 40 (2). pp. 187-194. ISSN 0143-0750

Jesumanen, J and Chandrasekaran, M and Aurtherson, P. Babu (2024) Influence of rice husk ash Si3N4 ceramic on mechanical, wear and low cycle fatigue behavior of hybrid pineapple/basalt fiber reinforced polyester composite. Biomass Conversion and Biorefinery. ISSN 2190-6815

K, Saravanan and J, Francis Xavier and M.P, Sudeshkumar and Maridurai, T. and Suyamburajan, Vijayananth and Jayaseelan, V. (2022) Optimization of SiC Abrasive Parameters on Machining of Ti-6Al-4V Alloy in AJM Using Taguchi-Grey Relational Method. Silicon, 14 (3). pp. 997-1004. ISSN 1876-990X

Kalyana Chakravarthy, P.R. and Ilango, T. and Chezhiyan, S. (2021) A detailed study on the mechanical and durability properties of hybrid fibre reinforced concrete. Materials Today: Proceedings, 21. pp. 684-689. ISSN 22147853

Kanimozhi, B. and Rajkumar, P. and Kumar, R.S. and Mahalingam, S. and Thamizhmani, Vivek and Selvakumar, Arun and Ravikumar, S. and Kesavakumar, R. and Pranesh, Venkat (2021) Kaolinite fines colloidal-suspension transport in high temperature porous subsurface aqueous environment: Implications to the geothermal sandstone and hot sedimentary aquifer reservoirs permeability. Geothermics, 89. p. 101975. ISSN 03756505

Kanimozhi, B. and Rajkumar, P. and Mahalingam, S. and Senthil, S. and Jayalakshmi, D.S. and Bai, H. Girija and Thamizhmani, Vivek and Kesavakumar, Ramadoss and Pranesh, Venkat (2023) Formation damage and improved recovery in kaolinitic high enthalpy gas fields with fabric geological settings. Gas Science and Engineering, 115. p. 204993. ISSN 29499089

Karthick, M. and Siva Ramakrishna, Ch. and Pugazhenthi, R. and Gudadhe, Nitin and Baskar, S. and Renu, F and Kumar, Rajan (2023) Contact stress analysis of xylon coated spur gear using ANSYS workbench. Materials Today: Proceedings. ISSN 22147853

Kumaraswamy, J. and Shetty, Vidyasagar and Sanman, S. and Naik, Premkumar and Shedthi, Shabari and Gnanavel, C. and Mogose, Ibsa Neme and Vijayan, V. (2022) Thermal Analysis of Ni-Cu Alloy Nanocomposites Processed by Sand Mold Casting. Advances in Materials Science and Engineering, 2022. pp. 1-11. ISSN 1687-8434

Logesh, K. and Tiwari, Reetesh and Harish, R. and Ajay, S. and adesh sunilrao, Netragaonkar (2019) Experimental Studies On Convective Heat Transfer Coefficient of Al203/Ethylene Glycol-Carbon Nano Tube Nanofluids. Materials Today: Proceedings, 18. pp. 4738-4744. ISSN 22147853

Lokesh Kumar, J. and Gurusamy, P. and Gayathri, N. and Muthuraman, V. (2024) Influence of graphene nanoplates and titanium diboride particulate on wear and interfacial bonding properties of sintered aluminium alloy composites. Diamond and Related Materials, 144. p. 111035. ISSN 09259635

Mahaviradhan, N. and Sivaganesan, S. and Padma Sravya, N. and Parthiban, A. (2021) Experimental investigation on mechanical properties of carbon fiber reinforced aluminum metal matrix composite. Materials Today: Proceedings, 39. pp. 743-747. ISSN 22147853

Malladi, Avinash and Saravanan, R. and Gnanavel, C. and Rajesh, S. and Sekar, C.B. and Nagarathi, D.K. (2022) Taguchi based parameter optimization for cutting force reduction in SAE 1045 steel machining with nanofluid. Materials Today: Proceedings, 62. pp. 1325-1329. ISSN 22147853

Ramasamy, Muthukumaran and Arul Daniel, Ajith and Nithya, M. and Sathees Kumar, S. and Pugazhenthi, R. (2021) Characterization of natural – Synthetic fiber reinforced epoxy based composite – Hybridization of kenaf fiber and kevlar fiber. Materials Today: Proceedings, 37. pp. 1699-1705. ISSN 22147853

Ramasubramanian, S. and Chandrasekaran, M. (2020) Optimisation of catalytic system for tar mitigation in biomass producer gas. International Journal of Ambient Energy, 41 (6). pp. 621-626. ISSN 0143-0750

Ramasubramanian, S. and Chandrasekaran, M. (2021) A statistical analysis on tar reduction in producer gas for IC engine application. International Journal of Ambient Energy, 42 (2). pp. 156-162. ISSN 0143-0750

Ravi, S. and Saravanan, K. and Jayabalakrishnan, D. and Prabhu, P. and Suyamburajan, Vijayananth and Jayaseelan, V. and Mayakkannan, A. V. (2022) Silane Grafted Nanosilica and Aramid Fibre-Reinforced Epoxy Composite: DMA, Fatigue and Dynamic Loading Behaviour. Silicon, 14 (6). pp. 2707-2715. ISSN 1876-990X

S. Sharavanan et al.,, S. Sharavanan et al., (2018) Experimental Investigation of Flexural and Hardness Behaviour of Hemp Flax Hybrid Composite. International Journal of Mechanical and Production Engineering Research and Development, 8 (4). pp. 55-60. ISSN 2249-6890

Saravanan, R. and Rajesh, S. and Gnanavel, C. and Malladi, Avinash and Sekar, C.B. and Nagarathi, D.K. (2022) Reconnoitering the influence of Nano fluid of Nano boracic acid particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish. Materials Today: Proceedings, 62. pp. 1330-1335. ISSN 22147853

Sathish, S. and Chandrasekaran, M. and Solomon, Gnanadurai Ravikumar (2019) Effect of total solids and agitation time on biogas yield, using rice husk. International Journal of Ambient Energy, 40 (1). pp. 101-104. ISSN 0143-0750

Selvam, R. and Vignesh, M. and Pugazhenthi, R. and Anbuchezhiyan, G. and Satyanarayana Gupta, M. (2024) Effect of process parameter on wire cut EDM using RSM method. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (5). pp. 2957-2968. ISSN 1955-2513

Shakarappa, R. and Peter, A.A. and Mallikarjuna, M.V. and Padmanabhan, S. and Ramesha, P. (2022) Synthesis, Microstructure and Wear Analysis of Copper Alloy with Alumina and Graphene as Reinforcement. International Journal of Vehicle Structures and Systems, 14 (3). ISSN 0975-3060

Sivakumar, V. and Visagavel, K. and Kumaraswamy, J. and Balaji, E. and Khalkar, V. and Gnanavel, C. and Chakravarthy, P. R. Kalyana and Baskar, S. and Vijayan, V. (2024) Performance study and analysis of Al2O3 Nanofluid under different flow conditions. Interactions, 245 (1). ISSN 3005-0731

Vairavel, M. and Chandrasekaran, M. and Vivek, P. and Vinod Kumar, T. (2021) Empirical performance analysis of VCR engine fuelled with karanja oil and various additives using ANOVA technique. International Journal of Ambient Energy, 41 (4). pp. 369-373. ISSN 0143-0750

Vairavel, M. and Pughazhenthi, R. and Girimurugan, R. and Vinothkumar, S. and N., Poornachandiran (2021) Effects of wear characterization analysis of the friction stir welded joints in aluminum alloy Al3116-Cu and A384 - Cu. Effects of Wear Characterization Analysis of the Friction Stir Welded Joints in Aluminum Alloy Al3116-Cu and A384 - Cu. 020112.

Venkatesh, A. P. and Latchoumi, T. P. and Chezhian Babu, S. and Balamurugan, K. and Ganesan, S. and Ruban, M. and Mulugeta, Lijalem and Vijayan, V. (2022) Multiparametric Optimization on Influence of Ethanol and Biodiesel Blends on Nanocoated Engine by Full Factorial Design. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Venkatesh, R. and Angalaparameswari, C. and Ammaiappan, M. and Das, A. Daniel and Arunkumar, G. and Kamatchi, R. Muthu and Kaliyaperumal, Gopal (2024) Effective Utilization of Bast Fiber in High Density Polyethylene Nanocomposite Enriched by Alumina Nanoparticle: Mechanical Performance Evaluation. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Book Section

Sravya, Navuluri Padma and Sivaganesan, S. (2021) Mechanical Characterization of Palmyra- and S Glass Fibre-Reinforced Hybrid Polymer Composites. In: Lecture Notes in Mechanical Engineering. springer, pp. 1087-1096.

Conference or Workshop Item

Jerin, A. and Karunakaran, K. (2022) Establish control over process parameters on ECM for improving the MRR of 12X18H10T - Stainless steel. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Maridurai, T. and Arivazhagan, R. and SivaChandran, S. and Venkatesh, R. and Baskar, S. (2022) Review on direct steam generation using concentrated solar collectors. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Raja S., Joseph Irudaya and Sivaganesan, S. and Pugazhenthi, R. (2022) Fractural behaviour analysis of areca nut fiber reinforced with epoxy resin. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Venkatesh, R. and SivaChandran, S. and Maridurai, T. and Baskar, S. and Sivashankar, N. and Arivazhagan, R. (2022) Magnesium alloy machining and its methodology: A systematic review and analyses. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.