Items where Division is "Mechanical Engineering" and Year is 2024

Article

Adakane, Rakesh and Washimkar, Prashant V. and Chaudhari, Sharad S. and Giri, Jayant and Sathish, T. and Parthiban, A. and Mahatme, Chetan (2024) Prediction and analysis of material removal rate and Tool wear for electric discharge machining of H16 material using ANN and ANOVA. Interactions, 245 (1). ISSN 3005-0731

Arunachalam, S. Jothi and Saravanan, R. and Sathish, T. and Parthiban, A. (2024) Comprehensive insights on mechanical properties of natural-synthetic fibres with nano-graphene composite. Interactions, 245 (1). ISSN 3005-0731

Arunachalam, S. Jothi and Saravanan, R. and Sathish, T. and Parthiban, A. (2024) Effect of nano-particle weight percent on the flexural strength of Jute/kenaf/glass fiber composite using RSM. Interactions, 245 (1). ISSN 3005-0731

Chaudhari, Sharad S. and Pundkar, A. H. and Giri, Jayant and Sathish, T. and Daryapurkar, A. S. and Chadge, Rajkumar and Parthiban, A. (2024) Optimizing air conditioning efficiency: Utilizing nano-oxides ZnO, CuO, and TiO2 with traditional and alternative refrigerants in medium temperature range cooling systems. Interactions, 245 (1). ISSN 3005-0731

Giri, Jayant and Sathish, T. and Sheikh, Taukeer and Sunheriya, Neeraj and Giri, Pallavi and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. (2024) Automatic liver segmentation using U-Net deep learning architecture for additive manufacturing. Interactions, 245 (1). ISSN 3005-0731

Giri, Jayant and Sunheriya, Neeraj and Sathish, T. and Kadu, Yash and Chadge, Rajkumar and Giri, Pallavi and Parthiban, A. and Mahatme, Chetan (2024) Optimization of process parameters to improve mechanical properties of fused deposition method using taguchi method. Interactions, 245 (1). ISSN 3005-0731

Gopalakrishnan, T. and Venkatesan, Raja and Chandrasekaran, M. and Deepa, Simon and Kim, Seong-Cheol (2024) Advances in implant for surface modification to enhance the interfacial bonding of shape memory alloy wires in composite resins. Progress in Organic Coatings, 188. p. 108242. ISSN 03009440

Hariharan, Chandran and parthiban, Alagesan and Thanikodi, Sathish (2024) Investigating indispensable characteristics of Boehmeria nivea and Agave sisalana fiber–reinforced epoxy hybrid composites for particle board applications. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Jesumanen, J and Chandrasekaran, M and Aurtherson, P. Babu (2024) Influence of rice husk ash Si3N4 ceramic on mechanical, wear and low cycle fatigue behavior of hybrid pineapple/basalt fiber reinforced polyester composite. Biomass Conversion and Biorefinery. ISSN 2190-6815

Kasinathan, Narendranathan Srinivasan and Suyamburajan, Vijayananth and Veerasundaram, Jayaseelan and Kumarsamy, Sudhakar (2024) CALOPHYLLUM INOPHYLLUM (PUNNAI SEED OIL) DERIVED BIOFUEL BLENDS: THERMAL PERFORMANCE AND ENGINE EMISSIONS. International Journal of Energy for a Clean Environment, 25 (1). pp. 37-50. ISSN 2150-3621

Lokesh Kumar, J. and Gurusamy, P. and Gayathri, N. and Muthuraman, V. (2024) Influence of graphene nanoplates and titanium diboride particulate on wear and interfacial bonding properties of sintered aluminium alloy composites. Diamond and Related Materials, 144. p. 111035. ISSN 09259635

Madan, A.B. and Parthiban, A. and Singh, J. and Bhattu, M. (2024) Experimental investigation of mechanical and tribological properties of AA7065- B 4 C nano-composite. E3S Web of Conferences, 509. 01014. ISSN 2267-1242

Madhanagopal, A. and Arunkumar, S. and Jagatheesan, K. and Adinarayanan, A. (2024) Investigation on mechanical and thermal properties of clay brick additions with sugarcane bagasse ash and nanoparticles. Biomass Conversion and Biorefinery, 14 (17). pp. 21475-21483. ISSN 2190-6815

Manickavelan, K. and Sivaganesan, S. and Sivamani, S. and Kulkarni, Mithun V. (2024) Response Surface Optimization of Brake Thermal Efficiency and Specific Fuel Consumption of Spark-Ignition Engine Fueled with Gasoline–Pyrooil and Gasoline–Pyrooil–Ethanol Blends. SAE International Journal of Fuels and Lubricants, 18 (1). ISSN 1946-3952

Muthukumaran, R. and Daniel, Ajith Arul and Nithya, M. and Parthiban, A. and Sathish, T. and Giri, Jayant and Al-Lohedan, Hamad A. (2024) Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite. AIP Advances, 14 (4). ISSN 2158-3226

Padmanabhan, S. and Joel, C. and Mahalingam, S. and Deepak, J. R. and Kumar, T. Vinod and Raj, Deborah (2024) An Overview of the Need for Circular Economy on Electric Vehicle Batteries. Nature Environment and Pollution Technology, 23 (1). pp. 183-191. ISSN 23953454

Pavan Kishore, M. L. and Madhavi, B. and Pati, Pravat Ranjan and Pugazhenthi, R. and Giri, Jayant and Sathish, T. and Parthiban, A. (2024) Free vibration analysis of composite aircraft wing. Interactions, 245 (1). ISSN 3005-0731

Prabhu, P. and Chokkalingam, V. and Arunkumar, S. and Perumal, Prakash (2024) The investigation on mechanical, thermal conductivity and water absorption characteristics of coir fiber-reinforced vinyl ester biocomposites. Biomass Conversion and Biorefinery. ISSN 2190-6815

Prabhu Deva, Madan and Parthiban, A. and Theerka Tharisanan, R. and Ashok Raj, R. and Singh, J. and Bhattu, M. (2024) Investigate the Mechanical properties of Al7075-MoS 2 Composite via Powder Metallurgy. E3S Web of Conferences, 509. 03006. ISSN 2267-1242

Prakash, N. Ram and Gnanavel, C. (2024) Effect of rice husk ash silicon nitride on mechanical, wear, thermal conductivity, and flammability behavior of aluminized glass-kenaf fiber-reinforced polyester composite. Biomass Conversion and Biorefinery. ISSN 2190-6815

Prakash, N. Ram and Gnanavel, C. (2024) Investigation of Quartz-Rich Granite Dust Particle-Reinforced Aluminized Glass–Kenaf Fiber-Reinforced Polyester Composite: Load Bearing, Water absorption and Flame Properties. Fibers and Polymers, 25 (9). pp. 3525-3537. ISSN 1229-9197

Prakash, P. and Elumalai, P.V. and Chelladurai, Hariharan and Josephine, Golden Renjith Nimal Renjith and Velumayil, Ramesh and Asif, Mohammad and Kit, Chan Choon and Venkatesan, Balambica and Rajagopal, Sabarish and Sanjeevi, Baskar and Reddy, M. Venkateswar and S, Prabhakar (2024) Parameter fine tuning on CRDI engine operated with blends of grape biodiesel and diesel. Case Studies in Thermal Engineering, 60. p. 104701. ISSN 2214157X

Purohit, Abhilash and Dehury, Janaki and Sitani, Ayush and Pati, Pravat Ranjan and Giri, Jayant and Sathish, T. and Parthiban, A. (2024) A novel study on the stacking sequence and mechanical properties of Jute-Kevlar-Epoxy composites. Interactions, 245 (1). ISSN 3005-0731

Radha Krishnan, B. and Sudarsan, D. and Sanjeevi, R. and Parthiban, A. and Eswara Prasath, N. and Arun Prasath, K. (2024) Formability and Strength Enhancement of AA7075 Sheets by Cryorolling and Post-Treatment. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Raj, J. Immanuel Durai and Durairaj, R. B. and Ananth, S. Vijay and Barmavatu, Praveen (2024) Experimental investigation of the effect of e‐waste fillers on the mechanical properties of Kenaf woven fiber composites. Environmental Quality Management, 34 (1). ISSN 1088-1913

Raj, J. Immanuel Durai and Durairaj, R. B. and Ananth, S. Vijay and Meenakshisundaram, Nagaraj (2024) Effect of e‐waste materials as filler in the flax woven fiber reinforced polymer composite for a sustainable environment. Environmental Quality Management, 33 (4). pp. 541-550. ISSN 1088-1913

Ravindran, Prabu and Kumar, Kumarappan Mani and Rangasamy, Selvam and Kumar, Kuttynadar Rajammal Vijaya (2024) Plain Kevlar and a CNT-reinforced Kevlar epoxy polymer composite: Comparative study of its mechanical, low velocity and ballistic impact properties. Iranian Polymer Journal, 32 (2). pp. 239-249. ISSN 1026-1265

Sambandam, Padmanabhan and James Raj, Deepak and Thangaraj, Vinod Kumar and Muthiya, Solomon Jenoris and Subramanian, Mohankumar and Pachamuthu, Senthilkumar and Praveen Kumar, T (2024) Investigation of the environmental implications of using cerium oxide nano-additives in gasoline engines fueled with gasoline-oxyhydrogen. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 46 (1). pp. 75-94. ISSN 1556-7036

Sathish, T. and Parthiban, A. (2024) Electrical instruments based thermal conductivity optimization on sintering of nanocomposites of Al and TiB with and without fly ash. Interactions, 245 (1). ISSN 3005-0731

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. (2024) Flexural properties of jute/kenaf/glass fibre reinforced nano-composite. Interactions, 245 (1). ISSN 3005-0731

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. and Giri, Jayant (2024) Comparing Kevlar Fiber influence on PP/sisal/SiO2 nanoparticle fillers/Kevlar hybrid nanocomposites with plain nanocomposite for enhanced mechanical properties. Interactions, 245 (1). ISSN 3005-0731

Selvam, R. and Vignesh, M. and Pugazhenthi, R. and Anbuchezhiyan, G. and Satyanarayana Gupta, M. (2024) Effect of process parameter on wire cut EDM using RSM method. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (5). pp. 2957-2968. ISSN 1955-2513

Sivabalan, S. and Sridhar, R. and Ajith Arul Daniel, S. and Sathishkumar, G. and Singh, J. and Bhattu, M. (2024) Study of mechanical behaviour & microstructural properties on friction stir welded aluminium alloys 6082 - t6&8011. E3S Web of Conferences, 509. 03012. ISSN 2267-1242

Sivakumar, V. and Visagavel, K. and Kumaraswamy, J. and Balaji, E. and Khalkar, V. and Gnanavel, C. and Chakravarthy, P. R. Kalyana and Baskar, S. and Vijayan, V. (2024) Performance study and analysis of Al2O3 Nanofluid under different flow conditions. Interactions, 245 (1). ISSN 3005-0731

Sunheriya, Neeraj and Giri, Jayant and Sathish, T. and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. and Barmavatu, Praveen (2024) Evaluation of a helical coil heat exchanger in a forced convection environment. Interactions, 245 (1). ISSN 3005-0731

Thejasree, P. and Manikandan, N. and Sunheriya, Neeraj and Giri, Jayant and Sathish, T. and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. (2024) Application of ANFIS approach for prediction of performance measures in wire electric discharge machining of SAE 1010. Interactions, 245 (1). ISSN 3005-0731

Venkatesh, R. and Angalaparameswari, C. and Ammaiappan, M. and Das, A. Daniel and Arunkumar, G. and Kamatchi, R. Muthu and Kaliyaperumal, Gopal (2024) Effective Utilization of Bast Fiber in High Density Polyethylene Nanocomposite Enriched by Alumina Nanoparticle: Mechanical Performance Evaluation. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Venkatesh, R. and Das, A. Daniel and Kamatchi, R. Muthu and Kaliyaperumal, Gopal and Ajin, M. and Shanmugam, Rajasekaran (2024) Synthesis and Functional Behavior of Sisal Fiber-Incorporated Epoxy Hybrid Nanocomposite Enriched by Nano-SiC. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Venkatesh, R. and Devanathan, C. and Dillikannan, Damodharan and Akila, P. and Kamatchi, R. Muthu and Das, A. Daniel and Karthikeyan, N. and Kaliyaperumal, Gopal (2024) Significance of Hemp Fiber on Mechanical and Thermal Performance of Polypropylene Nanocomposite Developed by Compression Mould Technique. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Venkatesh, R. and Dillikannan, Damodharan and Ilavarasan, N. and Kamatchi, R. Muthu and Das, A. Daniel and Ammaiappan, M. and Arunkumar, G. and Kaliyaperumal, Gopal (2024) An Approach of Nano-SiC-Filled Epoxy Nanocomposite Tensile and Flexural Strength Enriched by the Addition of Sisal Fiber. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Yaduwanshi, Deepak Kumar and Rao, Chennu Rama Mohan and Naidu, S. C. V. Ramana Murty and Sakharwade, Sanjay G. and Sharma, Sumit and Khalkar, V. and Baskar, S. and Kaliyaperumal, Gopal (2024) Thermal evaluation of aluminum welding: a comparative study of friction stir welding (FSW), plasma-fsw, and tungsten inert gas (TIG)-FSW techniques. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (8). pp. 5501-5513. ISSN 1955-2513

karthik, Ganapathi and Parthiban, A. and Sathish, T. and Giri, Jayant (2024) Experimental analysis and development of fuzzy model for the prediction of COP and mass flow rate in air-conditioning system. Interactions, 245 (1). ISSN 3005-0731

Book Section

Raj, S. Hari Krishna and Boopathy, G. and Vijayananth, S. and Balaji, G. and Ramanan, N. (2024) Feasibility and Insights into the Optimization and Characterization of Friction Welded Aluminum–Steel Dissimilar Joints. In: Advances in Science, Technology & Innovation. Springer, pp. 121-129.

Conference or Workshop Item

Gurusamy, P. and Raj, S. Hari Krishna and Muthuraman, V. and Kingsly, J. Joshua and Subash, V. and Ram, K. Shri Gokum and Srinivasan, D. (2024) Production and mechanical properties of aluminium – Copper alloy reinforced with Al2O3 metal matrix composites. In: INTERNATIONAL CONFERENCE ON MATHEMATICAL ANALYSIS AND ITS APPLICATIONS 2022 (IConMAA 2022): Analysis, Uncertainty, and Optimization, 14–16 October 2023, Medan, Indoensia.

Maruthapandian, M. and Pugazhenthi, R. (2024) Optimization of the micro plasma arc welding and tipping process of exhaust valve. In: INTERNATIONAL CONFERENCE ON MATHEMATICAL ANALYSIS AND ITS APPLICATIONS 2022 (IConMAA 2022): Analysis, Uncertainty, and Optimization, 14–16 October 2023, Medan, Indoensia.

Thirupathy, Maridurai and Vadivel, Muthuraman (2024) Effects of Tribology and Mechanical Properties on Silicon Carbide and Glass Fiber-Reinforced Hybrid Nanocomposites. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).

Thirupathy, Maridurai and Vadivel, Muthuraman (2024) Experimental Investigation on the Mechanical Properties of Jute Fiber and Silica Nano Particles Using Artificial Neural Network. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).

Thirupathy, Maridurai and Vadivel, Muthuraman and Subbiah, Thirugnanam and Pathinettampadian, Gurusamy (2024) Experimental Investigation of the Mechanical and Tribological Properties of Jute Fiber Composites with Nano-Sized Al2O3 Ceramic Particle Reinforcement. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).

Thirupathy, Maridurai and Vadivel, Muthuraman and Subbiah, Thirugnanam and Pathinettampadian, Gurusamy (2024) Experimental Investigation on the Impact of Tungsten Carbide Reinforcement on the Mechanical Properties of Sisal-Fiber-Reinforced Composites. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).