Items where Division is "Mechanical Engineering" and Year is 2022
![[up]](/style/images/multi_up.png)
Up a levelA
Abhishek Krishna Sai, A. and Chandrasekaran, M. and Vinod Kumar, T. and Pugazhenthi, R. (2022) Study the enhanced mechanical properties of Al/B4C metal matrix composite. Materials Today: Proceedings, 68. pp. 1422-1428. ISSN 22147853
Ahmed, Ansari Faiyaz and Sivaganesan, S. (2022) Characterization of material properties of green polymer composite. Materials Today: Proceedings, 69. pp. 789-792. ISSN 22147853
Ali, Zeeshan and Muthuraman, V. and Rathnakumar, P. and Gurusamy, P. and Nagaral, Madeva (2022) Studies on mechanical properties of 3 wt% of 40 and 90 µm size B4C particulates reinforced A356 alloy composites. Materials Today: Proceedings, 52. pp. 494-499. ISSN 22147853
Ananda Kumar, Eriki and Pugazhenhi, R. and Chandrasekaran, M. and Anbuchezhiyan, G. (2022) Effect of preheating on machinability of titanium alloy. Materials Today: Proceedings, 64. pp. 799-803. ISSN 22147853
Anandan, R. and Deepak, B. S. (2022) An Overview of Blockchain Technology: Fundamental Theories and Concepts: Challenges and Opportunities. In: The Convergence of Artificial Intelligence and Blockchain Technologies. WORLD SCIENTIFIC, pp. 1-22. ISBN 978-981-12-2507-9
Anbuchezhiyan, G and Saravanan, R and Pugazhenthi, R. and Rathinam, V. and Nagireddy, Madhavi (2022) Experimentally exploring nano-fluid of alumina nano-particles enriched waste coconut oil effects in cutting zone temperature reduction in motor shaft manufacturing process. Materials Today: Proceedings, 64. pp. 744-748. ISSN 22147853
Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Ananda Kumar, Eriki and Arunkumar, K. (2022) Experimental analysis on Feed force reduction performance by nano fluid of nano- alumina particles enriched waste coconut oil in wet machining of SAE 1045 steel shaft. Materials Today: Proceedings, 64. pp. 793-798. ISSN 22147853
Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Karunakaran, K. and Venkateswar Reddy, M. (2022) Experimentally investigating cutting force reduction performance by nano-alumina particles enriched waste coconut oil Nano fluid in electric motor shaft manufacturing. Materials Today: Proceedings, 64. pp. 765-770. ISSN 22147853
Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Palani, Kumaran and Mamidi, Vamsi Krishna and Thanigaivelan, R. (2022) Influence of Coated Electrode in Nanopowder Mixed EDM of Al–Zn–Mg–Si3N4 Composite. Advances in Materials Science and Engineering, 2022. pp. 1-11. ISSN 1687-8434
Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Rathinam, V. and Nagireddy, Madhavi (2022) Reconnoitering the influence of nanofluid of Nano- alumina particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish. Materials Today: Proceedings, 64. pp. 661-666. ISSN 22147853
Aneesh, V. N. and Karunakaran, K. (2022) Experimental investigation of sensitiveness wire electrical discharge machining parameters for12X18H10T - Stainless steel. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.
Anoop, J. and Suyamburajan, Vijay Ananth and Babu, P. Sekhar and Filketu, Sisay Addis and Vijayan, V. (2022) Analysis and Experimental Investigation of A356 Aluminium Alloy Hybrid Composites Reinforced with Gr‐FE 3 O 4 ‐B 4 C Nanoparticles Synthesised by Selective Laser Melting (SLM). Journal of Nanomaterials, 2022 (1). ISSN 1687-4110
Anthoni Sagaya Selvan, R and Thakur, Dinesh G and Seeman, M and Muraliraja, R and Ansari, Mohd. Imran (2022) Modelling and optimisation of ENi-P-TiO2 coatings synthesised with Zwitterionic surfactant on naval grade AH36 Steel. Sādhanā, 47 (3). ISSN 0973-7677
Arivazhagan, R. and Baskar, A and Venkatesh, R. and Maridurai, T. and SivaChandran, S. (2022) Performance analysis of steam generators in thermal power plant. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.
Arravind, R. and Kaliappan, S. and Vijayananth, Suyamburajan and Patil, Pravin P. and Sathya Prakash, M. and Ramasamy, N. (2022) An investigation on mechanical properties of AA336/Al2O3 composites by Duralcan process. Materials Today: Proceedings, 62. pp. 1299-1302. ISSN 22147853
Arunkumar, S and Alphin, M.S and Edward Kennedy, Z and Sriraman, N (2022) DEVELOPMENT OF A CO-EXTRUDED Al-Ti BIMETAL COMPOSITE. Materiali in tehnologije, 56 (1). ISSN 1580-2949
Aswin Kumar, S. and Gnanavel, C. and Pugazhenthi, R. and Baradeswaran, A. (2022) Experimental Investigation of Polymers Gears to the Composite Gears. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1013-1027.
B
Babu, S Senthil and Dhanasekaran, C and Anbuchezhiyan, G and Palani, Kumaran (2022) Parametric analysis on drilling of aluminium alloy hybrid composites reinforced with SIC/WC. Engineering Research Express, 4 (2). 025036. ISSN 2631-8695
Babu, S. Senthil and Dhanasekaran, C. (2022) Comparative analysis of thrust force, roughness and roundness error in drilling of aluminium composites using RSM, ANN and fuzzy logic. Materials Today: Proceedings, 69. pp. 908-917. ISSN 22147853
Balajikrishnabharathi, A. and Suyamburajan, Vijayananth and Kaliappan, S. and Patil, Pravin P and Jayabalakrishnan, D. and Sathya Prakash, M. and Sivabalan, T. (2022) Study of mechanical properties on Nano metal matrix Composites: Duralcan process. Materials Today: Proceedings, 62. pp. 1282-1287. ISSN 22147853
Balamurali, P. and Karthikeyan, S. and Anbuchezhiyan, G. and Pugazhenthi, R. (2022) Experimental Investigation and Optimization of Cryogenically Treated Titanium Grade-2 Alloy in Electrical Discharge Machining. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 107-119.
Baskar, S. and V.Vijayan, t and Isaac Premkumar, I.J. and Arunkumar, D. and Thamaran, Dowhi (2022) Design and material characteristics of hybrid electric vehicle. Materials Today: Proceedings, 37. pp. 351-353. ISSN 22147853
Baskaran, P. and Saravanan, R. and Vignesh, M. and Prasanna, N. and Gnanavel, C. and Nagarathi, D.K. and Gopalakrishnan, T. (2022) Influence of molybdenum disulfide particles’ concentration on waste cooking oil nano fluid coolant in cutting force reduction on machining SAE 1144 steel. Materials Today: Proceedings, 62. pp. 1969-1972. ISSN 22147853
Bupesh Raja, V. K. and Ramasubramanian, S. and Sonawwanay, Puskaraj D. and Palanikumar, K. and Reddy, Ajay Shivsharan and Nemade, Amit C. (2022) Increasing heat transfer in 4-stroke SI engine fins by nanocoating. International Journal of Ambient Energy, 43 (1). pp. 6763-6771. ISSN 0143-0750
Bupesh Raja, V. K. and Ramasubramanian, S. and Sonawwanay, Puskaraj D. and Palanikumar, K. and Reddy, Ajay Shivsharan and Nemade, Amit C. (2022) Increasing heat transfer in 4-stroke SI engine fins by nanocoating. International Journal of Ambient Energy, 43 (1). pp. 6763-6771. ISSN 0143-0750
C
Chandragowda, M. and Gnanavel, C. and Saravanan, D. and Stalin David, D. and Parthiban, R. and Rajesh, A.S. (2022) Consequence of silanee combination representative on the mechanical possessions of sugarcane bagasse and polypropylene amalgams. Materials Today: Proceedings, 56. pp. 1743-1751. ISSN 22147853
Chandran, Jishu and Manikandan, K. and Ganesh, R. and Baskar, S. (2022) Effect of nano-material on the performance patterns of waste cooking biodiesel fuelled diesel engine. International Journal of Ambient Energy, 43 (1). pp. 2226-2230. ISSN 0143-0750
Chandrasekaran, M. and Santhanam, V. and Venkateshwaran, N. (2022) Impeller design and CFD analysis of fluid flow in rotodynamic pumps. Materials Today: Proceedings, 37. pp. 2153-2157. ISSN 22147853
Chandrasekaran, M. and Sonawane, Pavankumar R. and Sriramya, P. (2022) Prediction of Gear Pitting Severity by Using Naive Bayes Machine Learning Algorithm. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 131-141.
Charles Godwin, R. and Dhanasekaran, C. (2022) Experimental investigation of high carbon steel MMC for crown pinion gear. Materials Today: Proceedings, 69. pp. 901-907. ISSN 22147853
Charulakshmi, T. and Chandran, M. (2022) A Relationship Between Ethnocentrism and Purchase Decision Pattern of Consumer in Chennai City. International Journal of Professional Business Review, 7 (5). e0809. ISSN 2525-3654
D
Durai Murugan, P. and Vijayananth, S. and Natarajan, M.P. and Jayabalakrishnan, D. and Arul, K. and Jayaseelan, V. and Elanchezhian, J. (2022) A current state of metal additive manufacturing methods: A review. Materials Today: Proceedings, 59. pp. 1277-1283. ISSN 22147853
G
Gnanavel, C. and Saravanan, R. and Malladi, Avinash and Sekar, C.B. and Rajesh, S. and Nagarathi, D.K. (2022) Feed force based optimization of process parameters by bio-nanofluid for machining SAE 1045 steel. Materials Today: Proceedings, 62. pp. 1319-1324. ISSN 22147853
Gurusamy, P. and Muthuraman, V. and Hari Krishna Raj, S. and Lokesh Kumar, J. (2022) Performance and Experimental Analysis of Al-Al2O3 Metal Matrix Composites. International Journal of Vehicle Structures and Systems, 14 (2). ISSN 0975-3060
Gurusamy, P. and Muthuraman, V. and Lokeshkumar, J. and Hari Krishna Raj, S. (2022) Fabrication and Mechanical Behaviour of Al-6061/Al2O3 Metal Matrix Composite Fabricated Through Powder Metallurgy Technique. International Journal of Vehicle Structures and Systems, 14 (1). ISSN 0975-3060
H
Hemadri, Kadapa and Ajith Arul Daniel, S and Kukanur, Vijayendra and Vijayananth, S and Kumar, R (2022) Investigation on mechanical characterization of Al/Mos2/WC hybrid composite. Materials Today: Proceedings, 69. pp. 995-999. ISSN 22147853
Hemadri, Kadapa and Ajith Arul Daniel, S. and Parthiban, A. and Vinod kumar, T. (2022) Investigation on the response parameters in electric discharge machining of developed aluminium metal matrix composites. Materials Today: Proceedings, 68. pp. 1214-1218. ISSN 22147853
J
Jerin, A. and Karunakaran, K. (2022) Establish control over process parameters on ECM for improving the MRR of 12X18H10T - Stainless steel. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.
Jerin, A. and Karunakaran, K. (2022) Minimizing maximum height of the profile on stainless steel of 12X18H10T for ECM. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.
K
K, Saravanan and J, Francis Xavier and M.P, Sudeshkumar and Maridurai, T. and Suyamburajan, Vijayananth and Jayaseelan, V. (2022) Optimization of SiC Abrasive Parameters on Machining of Ti-6Al-4V Alloy in AJM Using Taguchi-Grey Relational Method. Silicon, 14 (3). pp. 997-1004. ISSN 1876-990X
Kalyana Chakravarthy, P.R. and Ilango, T. and Pugazhenthi, R. (2022) Mechanical properties of concrete with foundry sand andcoconut shell as partial replacement for coarse and fine aggregate. Materials Today: Proceedings, 52. pp. 537-543. ISSN 22147853
Kamalakannan, K. and Sivaganesan, S. and Dhanasekaran, C. and Pugazhenthi, R. (2022) A Study on the Mechanical Properties of Alkali Treated Natural Reinforced Fiber Composites. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 673-682.
Karthick, M. and Logesh, K. and Baskar, S. and Sharma, Abhishek (2022) Performance and Emission Characteristics of Single-Cylinder Diesel Engine Fueled with Biodiesel Derived from Cashew Nut Shell. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. II. Springer, pp. 521-529.
Karunakaran, K. and Malladi, Avinash (2022) Design approach for metal additive manufacturing. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.
Karunakaran, K. and Pugazhenthi, R. and Anbuchezhiyan, G. and Saravanan, R. and Venkateswar Reddy, M (2022) Experimental investigations on synthesis and characterization of tamarind seed powder reinforced Bio- composites. Materials Today: Proceedings, 64. pp. 760-764. ISSN 22147853
Kukanur, Vijayendra and Ajith Arul Daniel, S. and Sivaganesan, S. and Algur, Veerabhadrappa (2022) Mechanical properties of silicon nitride fortified aluminium based metal matrix composites – A review. Materials Today: Proceedings, 68. pp. 1733-1736. ISSN 22147853
Kulkarni, H. Ravi and Dhanasekaran, C. and Rathnakumar, P. and Mohamed Iqbal, S. and Sivaganesan, S. (2022) Biosynthesized zinc nano fluid for helically coiled heat exchanger at constant heat flux. Materials Today: Proceedings, 58. pp. 104-113. ISSN 22147853
Kumar, Indradeep (2022) Synthesis and characterization of magnetite nanomaterials blended sheet with single-walled carbon nanotubes. In: Design, Fabrication, and Characterization of Multifunctional Nanomaterials. Elsevier, pp. 205-221.
Kumar, R. and Sivaganesan, S. and Senthamaraikannan, P. and Saravanakumar, S. S. and Khan, Anish and Ajith Arul Daniel, S. and Loganathan, L. (2022) Characterization of New Cellulosic Fiber from the Bark of Acacia nilotica L . Plant. Journal of Natural Fibers, 19 (1). pp. 199-208. ISSN 1544-0478
Kumaraswamy, J. and Shetty, Vidyasagar and Sanman, S. and Naik, Premkumar and Shedthi, Shabari and Gnanavel, C. and Mogose, Ibsa Neme and Vijayan, V. (2022) Thermal Analysis of Ni-Cu Alloy Nanocomposites Processed by Sand Mold Casting. Advances in Materials Science and Engineering, 2022. pp. 1-11. ISSN 1687-8434
Kumudham, R. and Sathish Kumar, P. and Rajendran, V. and Jagan Mugesh, M. S. and Charan Raj, U. (2022) Multiresolution Representation of SONAR Pipeline Image Using Pyramidal Transforms. In: Proceedings of International Conference on Power Electronics and Renewable Energy Systems. Springer, pp. 479-489.
kishore, Gundugandla and Parthiban, A. and Krishnan, A. Mohana and Krishnan, B. Radha and Vijayan, V. (2022) Experimental Investigation of Mechanical and Wear Properties of AL7075/Al2O3/MICA Hybrid Composite. Journal of Inorganic and Organometallic Polymers and Materials, 31 (3). pp. 1026-1034. ISSN 1574-1443
L
Logesh, K. and Karthick, M. and Baskar, S. and Sharma, Abhishek (2022) Performance and Emissions Characteristics of Diesel Engine Run on Citrullus Colocynthis Biodiesel with Zinc Oxide Additive. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. II. Springer, pp. 513-520.
M
Maheshwaran, R. and Dhanasekaran, C. and Sivaganesan, S. and Pugazhenthi, R. (2022) Investigation of Mechanical Behavior of Biodegradable Natural Composite PLA Reinforced with Snake Grass Fiber and Sisal Fiber. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 165-173.
Malladi, Avinash and Karunakaran, K. and Saravanan, R. and Asres, Yalew and Ares, Alicia E. (2022) Material Behaviour of Three Blade Propeller Using Metal Additive Manufacturing Techniques. Advances in Materials Science and Engineering, 2022. pp. 1-7. ISSN 1687-8434
Malladi, Avinash and Saravanan, R. and Gnanavel, C. and Rajesh, S. and Sekar, C.B. and Nagarathi, D.K. (2022) Taguchi based parameter optimization for cutting force reduction in SAE 1045 steel machining with nanofluid. Materials Today: Proceedings, 62. pp. 1325-1329. ISSN 22147853
Maridurai, T. and Arivazhagan, R. and SivaChandran, S. and Venkatesh, R. and Baskar, S. (2022) Review on direct steam generation using concentrated solar collectors. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.
Maruthapandian, M. and Pugazhenhi, R. and Gnanavel, C. (2022) Study the impaction tool speed on the friction stir welding of magnesium alloys plates. Materials Today: Proceedings, 69. pp. 832-836. ISSN 22147853
Muraliraja, R. (2022) A Critical Review of Carbon Nanotube-Based Surface Coatings. Progress in Physics of Metals, 23 (1). pp. 3-26. ISSN 16081021
Muraliraja, R. and Pradeepkumar, K. and Mohanraj, P. and Vinod Kumar, T. and Dhanasekaran, C. and Chandrasekaran, M. and Ragavanantham, S. and Shaisundaram, V. S. (2022) The Effects of Electroless Ni-P Coated SiC on the Properties of Magnesium Composite. Materials Performance and Characterization, 11 (1). p. 20210089. ISSN 23791365
Muthuraman, P. and Karunakaran, K. (2022) Al–Fe Alloy Connecting Rod—A Choice for Power Amplification in IC Engines. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1055-1062.
Muzeer, S. and Sivaganesan, S. (2022) Wear Optimization of Aluminium and Hybrid Reinforcement Metal Matrix Composites Using Response Surface Methodology. Materials Science Forum, 1073. pp. 37-48. ISSN 1662-9752
N
Natarajan, Senniangiri and Pathinettampadian, Gurusamy and Vadivel, Muthuraman and Yesudasan, Pastin Sony Sundar and Jesuretnam, Bensam Raj (2022) Influence of nano-silica on mechanical properties of Indian almond fiber reinforced hybrid epoxy composites. Journal of Natural Fibers, 19 (15). pp. 12004-12014. ISSN 1544-0478
P
Padmanabhan, S. and Kumar, T. Vinod and Giridharan, K. and Stalin, B. and Nagaprasad, N. and Jule, Leta Tesfaye and Ramaswamy, Krishnaraj (2022) An analysis of environment effect on ethanol blends with plastic fuel and blend optimization using a full factorial design. Scientific Reports, 12 (1). ISSN 2045-2322
Padmanabhan, S. and Selvamuthukumar, M. and Ganesan, S. and Baskar, S. and Sharma, Abhishek (2022) Investigation of Heat Transfer Characteristics in Double Tube Heat Exchanger with Helical Turbulator Using CFD. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. II. Springer, pp. 531-541.
Palanisamy, D. and Vishnu Vardhana Naidu, B. and Lenin, K. and Parthiban, A. and Gnanarathinam, A. (2022) Machinability investigation on nickel based super alloys using textured inserts. Materials Today: Proceedings, 68. pp. 1617-1621. ISSN 22147853
Palanivel, S. and Gopalakrishnan, T. and Pugazhenthi, R. (2022) Numerical Simulation on Fluidic Oscillator by Supersonic Flow Mechanism. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1139-1155.
Prabhu Deva, Madhan and Parthiban, A. and Radha Krishnan, B. and Haile, Adisu and Degife, Wubishet and Faris, Waleed Fekry (2022) Investigation of Wear Behaviour and Mechanical Properties of Titanium Diboride Reinforced AMMC Composites. Advances in Materials Science and Engineering, 2022. pp. 1-9. ISSN 1687-8434
Prakash, P. and Dhanasekaran, C. (2022) Application of ANN, RSM on engine response prediction using lemongrass biomaterial blends. Materials Today: Proceedings, 69. pp. 684-688. ISSN 22147853
Priyankar, D. and Ali, Zeeshan and Nagaral, Madeva and Rathnakumar, P. and Muthuraman, V. and Umar, M.D. (2022) Microstructure and evolution of mechanical properties of Cu-Sn alloy with graphite and nano zirconium oxide particulates. Materials Today: Proceedings, 52. pp. 296-300. ISSN 22147853
Pugazhenthi, R. and Anbuchezhiyan, G. and Muthuraman, R.K. and Vignesh, M. and Ponshanmugakumar, A. (2022) Optimization of fatigue life and fractography analysis of knuckle joint. Materials Today: Proceedings, 46. pp. 4344-4348. ISSN 22147853
R
Raja, R and Parthiban, A and Jeyakumar, S and Radha Krishnan, B (2022) Investigation of mechanical properties of friction stir welding aluminium alloy AA7475-T651 and AA2219-O. Materials Today: Proceedings, 60. pp. 1421-1423. ISSN 22147853
Raja, R. and Parthiban, A. and Nandha Gopan, S. and Degefa, Derese and Varol, Temel (2022) Investigate the Process Parameter on the Friction Stir Welding of Dissimilar Aluminium Alloys. Advances in Materials Science and Engineering, 2022. pp. 1-8. ISSN 1687-8434
Raja S., Joseph Irudaya and Sivaganesan, S. and Pugazhenthi, R. (2022) Fractural behaviour analysis of areca nut fiber reinforced with epoxy resin. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.
Rajesh, S. and Saravanan, R. and Sekar, C.B. and Gnanavel, C. and Malladi, Avinash and Nagarathi, D.K. (2022) Comparing green Machining and clean technology based Machining for tool wear reduction in Machining SAE 1045 steel. Materials Today: Proceedings, 62. pp. 1308-1313. ISSN 22147853
Ramasubramanian, S. and Shai Sundram, V.S. and Karikalan, L. and Baskar, S. and Kumar Sahu, Sandip and Borkar, Dilip S. and Kumar, Prashant (2022) Experimental analysis of nano additive blended in Mahua oil biodiesel on engine characteristics. Materials Today: Proceedings, 63. pp. 535-541. ISSN 22147853
Ramya, G. and Chandrasekaran, M. and Arulmozhi, P. (2022) Optimization of production cost for integrating job shop scheduling with production resources. Materials Today: Proceedings, 37. pp. 1839-1844. ISSN 22147853
Ravi, S. and Saravanan, K. and Jayabalakrishnan, D. and Prabhu, P. and Suyamburajan, Vijayananth and Jayaseelan, V. and Mayakkannan, A. V. (2022) Silane Grafted Nanosilica and Aramid Fibre-Reinforced Epoxy Composite: DMA, Fatigue and Dynamic Loading Behaviour. Silicon, 14 (6). pp. 2707-2715. ISSN 1876-990X
Roopa, D. and Prabha, R. and Senthil, G.A. (2022) Revolutionizing education system with interactive augmented reality for quality education. Materials Today: Proceedings, 46. pp. 3860-3863. ISSN 22147853
S
S, Muzeer and Sivaganesan, Dr.S. (2022) Tribological behaviour of aluminium based hybrid metal matrix composites (Al6061/B4C/ZrO2/SiC). Materials Today: Proceedings, 56. pp. 507-513. ISSN 22147853
S, Venkatesan and P. K., Giridharan and N S, Sivakumar and S, Sharavanan and Subbiah, Ram and A, Senthamilselvi (2022) Tribological behaviour of AA7168 hybrid composite sheets for aerospace structures fabricated through COMPO casting. Advances in Materials and Processing Technologies, 8 (sup2). pp. 402-410. ISSN 2374-068X
Sankar Subramanian, Lakshmi and Ganesan, S. and Venkatesan, S.P. and karthikayan, S. and Muniappan, P. and Pugazhenthi, R. (2022) Experimental analysis of VCR diesel engine exhaust emissions with zirconium dioxide and basalt based catalytic converter using lemon grass oil. Materials Today: Proceedings, 60. pp. 1949-1958. ISSN 22147853
Santhanam, V. and Sendhilkumar, S. and Venkateshwaran, N. and Chandrasekaran, M. (2022) The Effect of Drilling Parameters on the Hole Quality of Hybrid Fiber-Reinforced Epoxy Composite. In: The Effect of Drilling Parameters on the Hole Quality of Hybrid Fiber-Reinforced Epoxy Composite. Springer, pp. 99-110.
Saravanan, R. and Anbuchezhiyan, G. and Pugazhenthi, R. and Sura, Sreekanth (2022) Experimental investigation on tool wear reduction by nano- alumina particles enriched waste coconut oil nano-fluid for machining SAE 1045 shaft. Materials Today: Proceedings, 64. pp. 781-786. ISSN 22147853
Saravanan, R. and Rajesh, S. and Gnanavel, C. and Malladi, Avinash and Sekar, C.B. and Nagarathi, D.K. (2022) Reconnoitering the influence of Nano fluid of Nano boracic acid particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish. Materials Today: Proceedings, 62. pp. 1330-1335. ISSN 22147853
Sathish Kumar, G. and Sridhar, R. and Gokul, T. and Pugazhenthi, R. (2022) Study and compare the mechanical properties of bio fiber reinforced composites. Materials Today: Proceedings, 68. pp. 1429-1436. ISSN 22147853
SathishKumar, G. and Sridhar, R. and Sivabalan, S. and Pugazhenthi, R. (2022) Dynamic analysis of the natural fiber (Coir) reinforce polyester composite material with mechanical properties. Materials Today: Proceedings, 69. pp. 1292-1299. ISSN 22147853
Scaria, Clement Tom and Pugazhenthi, R. and Daniel, Ajith Arul and Santhosh, K. and Gopal, Pudhupalayam Muthukutti (2022) Mechanical and Wear Studies on AA7075/Nano TiC/Graphite Hybrid Composites for Tribological Applications. Advances in Materials Science and Engineering, 2022. pp. 1-8. ISSN 1687-8434
Senthil babu, S. and Dhanasekaran, C. (2022) Drilling parameter analysis of hybrid composites (Al/B4C/graphite) using grey relational and Taguchi techniques. Materials Today: Proceedings, 68. pp. 1280-1287. ISSN 22147853
Shakarappa, R. and Peter, A.A. and Mallikarjuna, M.V. and Padmanabhan, S. and Ramesha, P. (2022) Synthesis, Microstructure and Wear Analysis of Copper Alloy with Alumina and Graphene as Reinforcement. International Journal of Vehicle Structures and Systems, 14 (3). ISSN 0975-3060
Sharmilaa, G. and Ilango, T. (2022) Vehicular air pollution based on traffic density - A case study. Materials Today: Proceedings, 52. pp. 532-536. ISSN 22147853
SivaChandran, S. and Venkatesh, R. and Baskar, S. and Arivazhagan, R. and Maridurai, T. (2022) Experimental study of shell and tube heat exchanger. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.
Sivabalan, S. and Sridhar, R. and Pugazhenthi, R. and Kumar, Eriki Ananda and Sathish Kumar, G. (2022) Bird Impact Analysis of a Typical Transport Aircraft Wing. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 507-521.
Sivabalan, S. and Sridhar, R. and Sathishkumar, G. (2022) Study on mechanical behaviour of friction stir welded 6082-T6 aluminium alloys. Materials Today: Proceedings, 69. pp. 944-949. ISSN 22147853
Sreeram, D. and Pugazhenthi, R. and Anbuchezhiyan, G. and Saravanan, R. and Veeranjaneyulu, K. (2022) An investigation of the effects of hot rolling on the microstructure and mechanical behavior of nano-sized SiC particulates reinforced Al6063 alloy composites. Materials Today: Proceedings, 64. pp. 731-736. ISSN 22147853
Suyamburajan, Vijay Ananth and Jayaseelan, V. and Chandramohan, P. and Kumar, R. (2022) Mechanical Properties of Nanometal Matrix Composites Produced by Duralcan Process. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1121-1128.
T
Tamil Prabakaran, S. and Jerome, S. and Thirumal, P. and Shai Sundaram, V. S. and Selvaraju, Siva and Padmanabhan, S. (2022) Thermal Modelling and Experimental Validation of TIG Welding Using ANSYS. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 307-316.
Thamilarasan, J. and Ravikumar, V. and Yadav, S. Prasanna Raj and Yarlagadda, Jyothi and Kumar, Ashok and Ramasubramanian, S. and Sambandam, P. and Rudesh, Challa Parvathi and Asres, Yalew and Vijayan, V. (2022) Sustainability Improvement of Ethanol Blended Gasoline Fuelled Spark Ignition Engine by Nanoparticles. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110
U
Udaya Kumar, M. and Sivaganesan, S. and Dhanasekaran, C. and Parthiban, A. (2022) Analysis of performance, combustion and emission parameters in di diesel engine by using mahua methyl ester along with nano metal additives titanium dioxide. Materials Today: Proceedings, 37. pp. 3404-3410. ISSN 22147853
Udayakumar, M. and Sivaganesan, S. and Sivamani, S. (2022) Performance and emissions of lemon peel oil biodiesel powered single cylinder direct injection diesel engine loaded with ceria nanoparticles additives and stabilized zirconia coating. Materials Today: Proceedings, 66. pp. 1994-2000. ISSN 22147853
Udayakumar, M. and Sivaganesan, S. and Sivamani, S. (2022) Process optimization of KOH catalyzed biodiesel production from crude sunflower-mahua oil. Biofuels, 13 (8). pp. 1031-1039. ISSN 1759-7269
Umar, MD. and Muraliraja, R. and Shaisundaram, V. S. and Wayessa, Shiferaw Garoma and B, Deepanraj (2022) Influence of Future Material Nano‐ZrO 2 and Graphene on the Mechanical Properties of Al Composites. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110
V
Varunraj, S. and Ruban, M. (2022) Investigation of the microstructure and mechanical properties of AA6063 and AA7075 dissimilar aluminium alloys by friction stir welding process. Materials Today: Proceedings, 68. pp. 1654-1657. ISSN 22147853
Venkatesh, R. and SivaChandran, S. and Maridurai, T. and Baskar, S. and Sivashankar, N. and Arivazhagan, R. (2022) Magnesium alloy machining and its methodology: A systematic review and analyses. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.
Vijayaraghavan, P. and Janakiraman, V. and Surulivel rajan, T. and Logesh, K. and Rajiv Gandhi, N. and Gnanavel, C. and Sathi, G. (2022) Analysis of titanium coated silencer exhaust gas emission in automobile vehicle using artificial neural network. Materials Today: Proceedings, 69. pp. 732-738. ISSN 22147853