Items where Division is "Mechanical Engineering" and Year is 2021

[up] Up a level
Group by: VELS Creators | Item Type | No Grouping
Number of items: 101.

Ajith, Arul Daniel S. and Dhanasekeran, C. and Sivaganesan, S. and Sridhar, R. (2021) Investigation on the Mechanical Properties of Silicon Carbide Particulates in Al/SiC/MoS<sub>2 </sub>. Materials Science Forum, 979. pp. 89-94. ISSN 1662-9752

Ajith Arul Daniel, S. and Parthiban, A. and Sivaganesan, S. and Vijay Ananth, S. (2021) Investigation on Surface Roughness in Drilling of al/SiC/MoS2 Metal Matrix Composites. In: Lecture Notes in Mechanical Engineering. springer, pp. 717-724.

Akash, R. and Muraliraja, R. and Suthan, R. and Shaisundaram, V.S. (2021) Synthesis and testing of aluminium composite using industrial waste as reinforcement. Materials Today: Proceedings, 37. pp. 634-637. ISSN 22147853

Ali, K. S. Ashraff and Mohanavel, V. and Gnanavel, C. and Vijayan, V. and Senthilkumar, N. (2021) Structural and optical behavior of SnS2/NiFe2O4 NCs prepared via novel two-step synthesis approach for MB and RhB dye degradation under sun light irradiation. Research on Chemical Intermediates, 47 (5). pp. 1941-1954. ISSN 0922-6168

Ali, Zeeshan and Muthuraman, V. and Rathnakumar, P and Gurusamy, P. and Nagaral, Madeva (2021) Investigation on the tribological properties of copper alloy reinforced with Gr/Zro2 particulates by stir casting route. Materials Today: Proceedings, 33. pp. 3449-3453. ISSN 22147853

Ananda, K. Eriki and Pugazhenthi, R. and Chandrasekaran, M. (2021) Comparison in surface roughness of Ti6Al4v using CBN & bondless tool with the operations of turning and grinding. Comparison in surface roughness of Ti6Al4v using CBN & bondless tool with the operations of turning and grinding. 020110.

Anbuchezhiyan, G. and Mohan, B. and Kathiresan, S. and Pugazenthi, R. (2021) Influence of microstructure and mechanical properties of TiC reinforced magnesium nano composites. Materials Today: Proceedings, 27. pp. 1530-1534. ISSN 22147853

Anbuchezhiyan, G. and Mohan, B. and Senthilkumar, N. and Pugazhenthi, R. (2021) Synthesis and Characterization of Silicon Nitride Reinforced Al–Mg–Zn Alloy Composites. Metals and Materials International, 27 (8). pp. 3058-3069. ISSN 1598-9623

Arunachalam, Ramanathan and Piya, Sujan and Krishnan, Pradeep Kumar and Muraliraja, Rajaraman and Christy, John Victor and Mourad, Abdel-Hamid I. and Al-Maharbi, Majid (2021) Optimization of stir–squeeze casting parameters for production of metal matrix composites using a hybrid analytical hierarchy process–Taguchi-Grey approach. Engineering Optimization, 52 (7). pp. 1166-1183. ISSN 0305-215X

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V. and Vinod Kumar, T. (2021) Study properties and mechanical behavior of the shaft material 16MnCr5. Materials Today: Proceedings, 37. pp. 2458-2461. ISSN 22147853

Arunkumar, S. and Dhanasekaran, C. and Muthuraman, V. and Vinod Kumar, T. (2021) Modelling and stress analysis of shaft used in hydraulic streeing pump. Materials Today: Proceedings, 37. pp. 2474-2477. ISSN 22147853

Baskar, S. and Karikalan, L. (2021) Thermo-Physical Properties of Al2O3 and Preparation Technique. In: Lecture Notes in Mechanical Engineering. springer, pp. 705-710.

Basker, Sanjeevi and Parthiban, A. and Saravanan, R. and Vijayan, V. and Sathish, T. and Premkumar, I. J. Isaac (2021) Influence of chemical treatment in synthesize and characterization sisal/glass hybrid composite. Influence of Chemical Treatment in Synthesize and Characterization Sisal/Glass Hybrid Composite. 020065.

Daniel, S. Ajith Arul and Velu, P. Shenbaga and Kumar, R. and Ananth, S. Vijay (2021) Numerical analysis of single cylinder engine crankshaft. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

Desai, Pranav and Kalathingal, Amith (2021) Fresh and Hardened Properties of Pastes and Concretes with LC3 and Its Economic Viability: Indian Ready Mix Industry Perspective. Fresh and Hardened Properties of Pastes and Concretes with LC3 and Its Economic Viability: Indian Ready Mix Industry Perspective. pp. 821-832.

Dhanaraj, R. and Venkateshwaran, N. and Chenthil, M. and Natarajan, M.S. and Santhanam, V. and Baskar, S. (2021) Experimental investigation on the mechanical properties of glass fiber with perforated aluminum sheet reinforced epoxy composite. Materials Today: Proceedings, 37. pp. 1880-1883. ISSN 22147853

Dhinakaran, R. and Muraliraja, R. and Elansezhian, R. and Baskar, S. and Satish, S. and Shaisundaram, V.S. (2021) Utilization of solar resource using phase change material assisted solar water heater and the influence of nano filler. Materials Today: Proceedings, 37. pp. 1281-1285. ISSN 22147853

Dinesh, S. and Parameshwaran Pillai, T. and Parthiban, A. and Rajaguru, K. (2021) Modelling of WEDM process for machining ASTM 52100 steel. Materials Today: Proceedings, 37. pp. 1103-1106. ISSN 22147853

Dinesh, S. and Vijayan, V. and Parthiban, A. and Saravanan, C. and Suresh Kumar, B. (2021) Modeling and Optimization of Machining Parameters for Turning of Mild Steel Using Single-Point Cutting Tool Made of P20 Tool Steel. In: Lecture Notes in Networks and Systems. Springer, pp. 285-295.

Dinesh Kumar, S. and Ponraj Sankar, L. and Sathish, T. and Vijayan, V. and Parthiban, A. and Kamalakannan, R. and Rajkumar, S. and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Improving the Mechanical Properties of Natural Fiber Composites of Hemp Fiber with Ramie and Banana Fiber through Compression Molding Method. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Ganesh, K. and Daniel, Ajith Arul and Pugazhenthi, R. and Balamurali, P. (2021) Study the evaluation of underactuated robotic gripper. In: RECENT TRENDS IN MANUFACTURING TECHNOLOGIES, MATERIALS PROCESSING, AND TESTING, 18–19 February 2021, Chennai, India.

Geethan, K. Arun Vasantha and Xavier, J. Francis and Srimurugan, R. and Ananth, S. Vijay and Jayaseelan, V. (2021) Design and analysis of chain strip in roller conveyor under tensile load. Design and Analysis of Chain Strip in Roller Conveyor under Tensile Load. 020133.

Girimurugan, R. and Pugazhenthi, R. and Maheskumar, Pon. and Suresh, T. and Vairavel, M. (2021) Impact and hardness behaviour of epoxy resin matrix composites reinforced with banana fiber/camellia sinensis particles. Materials Today: Proceedings, 39. pp. 373-377. ISSN 22147853

Girimurugan, R. and Pugazhenthi, R. and Suresh, T. and Maheskumar, Pon. and Vairavel, M. (2021) Prediction of mechanical properties of hybrid aluminium composites. Materials Today: Proceedings, 39. pp. 712-716. ISSN 22147853

Girimurugan, R. and Vairavel, M. and Moorthy, A. Anandha and Prakash, E. and Madheswaran, S. (2021) Experimental Studies on Mechanical Behaviour of Polylactide (PLA) Matrix—Aluminium Oxide (Al2O3) Particles Reinforced Composites. In: Advances in Materials Research. springer, pp. 589-597.

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2021) CFD analysis of solar still with PCM. Materials Today: Proceedings, 37. pp. 694-700. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2021) Investigation of appropriateness of coated steel piston for aluminium alloy piston for small engines. International Journal of Ambient Energy, 41 (11). pp. 1293-1298. ISSN 0143-0750

Gnanavel, C. and Saravanan, R. and Gopalakrishnan, T. and Pugazhenthi, R. (2021) Fracture toughness reinforcement by CNT on G/E/C hybrid composite. Materials Today: Proceedings, 37. pp. 1046-1050. ISSN 22147853

Godwin, R.Charles and Dhanasekaran, C. (2021) Optimization of crown and pinion using metal matrix composite. Journal of Materials Research and Technology, 15. pp. 6204-6215. ISSN 22387854

Gopala Krishnan, T. and Lokesharun, D. and Saravanan, R. and Poornachandiran, N. (2021) CFD based shape optimization of axisymmetric cavitators in supercavitating flows. CFD Based Shape Optimization of Axisymmetric Cavitators in Supercavitating Flows. 020115.

Gopalakrishnan, T. and Saravanan, R. and Daniel, S. Ajith Arul (2021) Synthesize and characterization of fly ash based nanocomposites. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

Gunasekaran, N. and Manoj Kumar, P. and Raja, S. and Sharavanan, S. and Avinas, K. and Aakash Kannan, P. and Gokul, S. (2021) Investigation on ETC solar water heater using twisted tape inserts. Materials Today: Proceedings, 47. pp. 5011-5016. ISSN 22147853

Gurusamy, P. and Prabu, S. Balasivanandha and Nagasankar, P. and Muthuraman, V. and Mohanavel, V. (2021) Solidification behaviour of squeeze cast aluminium composites. Solidification behaviour of squeeze cast aluminium composites. 020028.

Jayakanth, J.J. and Chandrasekaran, M. and Pugazhenthi, R. (2021) Impulse excitation analysis of material defects in ball bearing. Materials Today: Proceedings, 39. pp. 717-724. ISSN 22147853

Jayakanth, J.J. and Mamidi, Vamsi Krishna and Pugazhenthi, R. and Anbuchezhiyan, G. and Ponshanmugakumar, A. (2021) An investigation on wear properties of SiC/WC strengthened aluminium alloy hybrid composites. Materials Today: Proceedings, 46. pp. 3542-3545. ISSN 22147853

Jayaseelan, V. and Geethan, Arunvasantha and Xavier, J. Francis and Srimurugan, R. and Vijay Ananth, S. (2021) Optimizations of extrusion semidie angle and fabrication of extrusion die. Optimizations of Extrusion SemiDie Angle and Fabrication of Extrusion Die. 020063.

Jerin, A. and Karunakaran, K. (2021) Advances in simulation modeling and analysis of curvilinear electro chemical machining process. Materials Today: Proceedings, 37. pp. 1588-1591. ISSN 22147853

Jeya Jeevahan, J. and Chandrasekaran, M. and Venkatesan, S.P. and Sriram, V. and Britto Joseph, G. and Mageshwaran, G. and Durairaj, R.B. (2021) Scaling up difficulties and commercial aspects of edible films for food packaging: A review. Trends in Food Science & Technology, 100. pp. 210-222. ISSN 09242244

Joseph Irudaya Raja, S. and Sivaganesan, S. (2021) Experimental investigation on wear properties with micro-structure behavior of arecanut reinforced polymer composite material. Materials Today: Proceedings, 39. pp. 682-689. ISSN 22147853

Kalyana Chakravarthy, P.R. and Ilango, T. and Chezhiyan, S. (2021) A detailed study on the mechanical and durability properties of hybrid fibre reinforced concrete. Materials Today: Proceedings, 21. pp. 684-689. ISSN 22147853

Kanimozhi, B. and Mahalingam, S. and Pranesh, Venkat and Kesavakumar, R. and Senthil, S. and Ravikumar, S. and Pradeep, Shanthi and Senthil, Sandhya and Murugan, Raji (2021) Colloidal release in high temperature porous media with oversaturated fines during supercritical CO2 transport. Journal of Petroleum Science and Engineering, 192. p. 107345. ISSN 09204105

Kanimozhi, B. and Rajkumar, P. and Kumar, R.S. and Mahalingam, S. and Thamizhmani, Vivek and Selvakumar, Arun and Ravikumar, S. and Kesavakumar, R. and Pranesh, Venkat (2021) Kaolinite fines colloidal-suspension transport in high temperature porous subsurface aqueous environment: Implications to the geothermal sandstone and hot sedimentary aquifer reservoirs permeability. Geothermics, 89. p. 101975. ISSN 03756505

Karikalan, L. and Chandrasekaran, M. and Venugopal, S. and Jacob, S. and Baskar, S. (2021) Investigations on diesel engine characteristics with Pongamia biodiesel at dissimilar compression ratios. International Journal of Ambient Energy, 42 (9). pp. 1005-1008. ISSN 0143-0750

Karikalan, L. and Sakthivel, P. (2021) Assessing the diesel engine performance using piston with dissimilar material piston rings. Materials Today: Proceedings, 21. pp. 796-799. ISSN 22147853

Kishore, Gundugandla and Parthiban, A and Sivaram, A.R and Vijayan, V (2021) Experimental optimization of corrosion rate analysis for AA 5083 – Titanium Diboride (TiB2) composites. Materials Today: Proceedings, 37. pp. 3256-3261. ISSN 22147853

Koparde, Anand and Mithra, Nithin and Ahankari, Sandeep (2021) Numerical and experimental analysis of torsional stress of traditional and modified steering yoke. Materials Today: Proceedings, 46. pp. 7099-7104. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C. (2021) Iron-based nanomaterial sheets for electromechanical applications. Materials Today: Proceedings, 45. pp. 3881-3885. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C. (2021) Iron-based nanomaterial sheets for electromechanical applications. Materials Today: Proceedings, 45. pp. 3881-3885. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C. (2021) Synthesizing of helical-single walled carbon nanotubes by chemical vapour decomposition for engine. Materials Today: Proceedings, 28. pp. 2174-2179. ISSN 22147853

Kumar, R. and Hynes, N. Rajesh Jesudoss (2021) Prediction and optimization of surface roughness in thermal drilling using integrated ANFIS and GA approach. Engineering Science and Technology, an International Journal, 23 (1). pp. 30-41. ISSN 22150986

Kumar, R. and Senthamaraikannan, P. and Saravanakumar, S.S. and Khan, Anish and Ganesh, K. and Vijay Ananth, S. (2021) Electroactive polymer composites and applications. Electroactive polymer composites and applications. pp. 149-156.

Kumar, R. and Suyamburajan, Vijay Ananth and Khan, Anish and Asiri, Abdullah M. and Dzudzevic-Cancar, Hurija (2021) Nanophotocatalysts for hydrogen production applications. Nanophotocatalysts for hydrogen production applications. pp. 219-229.

Kumar, S.D. and Pugazhenthi, R. and Ajith Arul Danial, S. and Swaminathan, G. (2021) Optimization of Dissimilar aluminum alloy by Friction stir welding Process Control variables with Multiple Objectives. Journal of Physics: Conference Series, 2040 (1). 012042. ISSN 1742-6588

Mahalingam, S. and Pranesh, Venkat and Kanimozhi, B. and Thamizhmani, Vivek and Arun Selvakumar, T. (2021) Subcritical CO2 effects on kaolinite fines transport in porous limestone media. Journal of Petroleum Exploration and Production Technology, 10 (3). pp. 883-891. ISSN 2190-0558

Mahaviradhan, N. and Sivaganesan, S. (2021) Tribological analysis of hybrid aluminum matrix composites for high temperature applications. Materials Today: Proceedings, 39. pp. 669-675. ISSN 22147853

Mahaviradhan, N. and Sivaganesan, S. and Padma Sravya, N. and Parthiban, A. (2021) Experimental investigation on mechanical properties of carbon fiber reinforced aluminum metal matrix composite. Materials Today: Proceedings, 39. pp. 743-747. ISSN 22147853

Malladi, Avinash and Karunakaran, K. (2021) DMLS – An insight for unproblematic production. Materials Today: Proceedings, 37. pp. 1986-1990. ISSN 22147853

Malligarjunan, S. and Chandrasekaran, M. and Bhaskar, G.B. (2021) Investigation on the effect of support structure space in determining optimal part orientation using a generic algorithm. International Journal of Manufacturing Technology and Management, 35 (6). p. 527. ISSN 1368-2148

Muthuraman, P. and Karunakaran, K. (2021) Optimization of face milling process parameters by GRA with deep cryogenic treated milling cutter. Materials Today: Proceedings, 37. pp. 1613-1617. ISSN 22147853

Parthiban, A. and Dhanasekaran, C. and Sivaganesan, S. and Sathish, S. (2021) Modeling on surface cut quality of CO2 laser cutting for Austenitic Stainless steel sheet. Materials Today: Proceedings, 21. pp. 823-827. ISSN 22147853

Parthiban, A. and Vijayan, V. and Saravanan, R. and Sathish, T. and Premkumar, I. J. Isaac and Basker, Sanjeevi (2021) Experimental investigation glass/sodium oxidanide treated banana fiber hybrid. Experimental Investigation Glass/ sodium oxidanide Treated Banana Fiber Hybrid. 020064.

Parthiban, A. and Vijayan, V. and Sathish, T. and Dinesh Kumar, S. and Ponraj Sankar, L. and Parthipan, N. and Tafesse, Dawit and Tufa, Mebratu and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Parameters of Porosity and Compressive Strength‐Based Optimization on Reinforced Aluminium from the Recycled Waste Automobile Frames. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Poornachandiran, N. and Pugazhenthi, R. and Vijay Ananth, S. and Krishnan, T. Gopala and Vairavel, M. (2021) Investigation of mechanical properties of Al6061 with reinforcement of SiC/B4C metal matrix composites. Investigation of Mechanical Properties of Al6061 with Reinforcement of SiC/B4C Metal Matrix Composites. 020113.

Poovazhgan, Lakshmanan and Vijayananth, Suyamburajan and Sivaganesan, S. (2021) Optimizing Ultrasonic Power on Fabricating Aluminum Nanocomposites Reinforced with Boron Carbide Nanoparticles. Materials Science Forum, 979. pp. 28-33. ISSN 1662-9752

Prajulraj, P. and Sridhar, R. (2021) Experimental investigation on mechanical and morphological properties of AA 6061 reinforced with silicon carbide. Materials Today: Proceedings, 37. pp. 2041-2047. ISSN 22147853

Premkumar, I. J. Isaac and Basker, Sanjeevi and Saravanan, R. and Vijayan, V. and Parthiban, A. and Sathish, T. (2021) Dwindling setup time through a low-cost mechanization – A case study. Dwindling Setup Time through a Low-Cost Mechanization – A Case Study. 020068.

Pugazhenthi, R. and Sreeram, D. and Scaria, Clement Tom and Anbuchezhiyan, G. and Nanthakumar, P. (2021) Effect of process parameters on machining of Al -TiC metal matrix composites using RSM. Materials Today: Proceedings, 46. pp. 3282-3287. ISSN 22147853

Ramasamy, Muthukumaran and Arul Daniel, Ajith and Nithya, M. and Sathees Kumar, S. and Pugazhenthi, R. (2021) Characterization of natural – Synthetic fiber reinforced epoxy based composite – Hybridization of kenaf fiber and kevlar fiber. Materials Today: Proceedings, 37. pp. 1699-1705. ISSN 22147853

Ramasamy, Muthukumaran and Daniel, Ajith Arul and D., Upendar Chary and Nithya, M. (2021) Aluminium (Al7050) metal matrix composites: A review of reinforcement and mechanical characteristics. Aluminium (Al7050) metal matrix composites: A review of reinforcement and mechanical characteristics. 020003. ISSN 978-0-7354-4114-9

Ramasamy, Muthukumaran and Daniel, Ajith Arul and M., Nithya (2021) A review on aluminium (Al7050) metal matrix composite characteristics reinforced with titanium. Materials Today: Proceedings, 43. pp. 1720-1723. ISSN 22147853

Ramasamy, Muthukumaran and Daniel, Ajith Arul and Nithya, M. (2021) Investigation on surface roughness of aluminium (Al7050/TiC/BN) hybrid metal matrix. Materials Today: Proceedings, 46. pp. 852-856. ISSN 22147853

Ramasubramanian, S. and Chandrasekaran, M. (2021) A statistical analysis on tar reduction in producer gas for IC engine application. International Journal of Ambient Energy, 42 (2). pp. 156-162. ISSN 0143-0750

Ravuri, Manu and Pugazhenthi, R. (2021) The effect of sintering temperature on components prepared by Cu powder mixed with binder. The Effect of Sintering Temperature on Components Prepared by Cu Powder Mixed with Binder. 020111.

S, Rajkumar and S, Loganathan and R, Venkatesh and B S, Madhan Prabhu Deva (2021) Investigate of Wear Behaviour and Mechanical Properties of Titanium Diboride Reinforced AMMC Composites. Journal of New Materials for Electrochemical Systems, 24 (1). pp. 254-260. ISSN 14802422

Samuel, Johnson and Sathish, S. and Parthiban, M. (2021) Performance and analysis of a retrofit electrostatic precipitator before a diesel particulate filter to reduce particulate matter in diesel exhaust system. International Journal of Ambient Energy, 42 (11). pp. 1321-1325. ISSN 0143-0750

Saravanan, R. and Karuppasamy, M. and Chandrasekaran, M. and Muthuraman, V. (2021) Heat Transfer Effect of CNT and Ethylene Glycol Based Nano-Fluid in Twisted Tape Heat Exchanger with Balls. International Journal of Vehicle Structures and Systems, 12 (4). ISSN 0975-3060

Sathish, S and Kannan, M and Sathish Babu, R and Johnson Samuel, S (2021) EXPERIMENTAL ANALYSIS OF SINGLE REFLECTOR BOX TYPE SOLAR COOKER WITH THERMO FLUID. Journal of critical reviews, 7 (13). ISSN 23945125

Sathish, S. and Parthiban, A. and Jothi Prakash, V.M. and Mageswaran, C. and Suresh, R. (2021) sAnaerobic co - digestion of canteen waste with cattle manure for methane production. Materials Today: Proceedings, 37. pp. 3446-3449. ISSN 22147853

Sathish, T. and Premkumar, I. J. Isaac and Saravanan, R. and Basker, Sanjeevi and Parthiban, A. and Vijayan, V. (2021) Multiply of process speed, quality and safety through low-cost automation – A case study. Multiply ofProcess Speed, Quality and Safety through Low- Cost Automation –A Case Study. 020067.

Sebastian, Sanoop and Suyamburajan, VijayAnanth (2021) Microstructural analysis of diffusion bonding on copper stainless steel. Materials Today: Proceedings, 37. pp. 1706-1712. ISSN 22147853

Sebastian, Sanoop and Suyamburajan, VijayAnanth and R, Kumar and Daniel, Ajith Arul (2021) Synthesis, processing and finite element analysis of CNT based polymer composites. In: RECENT TRENDS IN MANUFACTURING TECHNOLOGIES, MATERIALS PROCESSING, AND TESTING, 18–19 February 2021, Chennai, India.

Sivabalan, S. and Sridhar, R. and Parthiban, A. and Sathiskumar, G. (2021) Experimental investigations of mechanical behavior of friction stir welding on aluminium alloy 6063. Materials Today: Proceedings, 37. pp. 1678-1684. ISSN 22147853

Sonawane, Pavankumar Ravindra and Chandrasekaran, M (2021) Investigation of gear pitting defect using vibration characteristics in a single-stage gearbox. The International Journal of Electrical Engineering & Education, 57 (3). pp. 272-278. ISSN 0020-7209

Sravya, Navuluri Padma and Sivaganesan, S. (2021) Mechanical Characterization of Palmyra- and S Glass Fibre-Reinforced Hybrid Polymer Composites. In: Lecture Notes in Mechanical Engineering. springer, pp. 1087-1096.

Sridhar, R. and Baskar, S. and Shaisundaram, V.S. and Karunakaran, K. and Ruban, M. and Joseph Irudaya Raja, S. (2021) Design and development of material behavior of line follower automated vehicle. Materials Today: Proceedings, 37. pp. 2193-2195. ISSN 22147853

Sridhar, R. and Jeevahan, Jeya and Chandrasekaran, M. (2021) Effect of the addition of 1-pentanol on engine performance and emission characteristics of diesel and biodiesel fuelled single cylinder diesel engine. International Journal of Ambient Energy, 41 (1). pp. 58-63. ISSN 0143-0750

Sridhar, R. and Shaisundaram, V.S. and Baskar, S. and Ramasubramanian, S. and Sathiskumar, G. and Sivabalan, S. (2021) Investigation of grape seed oil biodiesel with cerium oxide nanoparticle in CI engine. Materials Today: Proceedings, 37. pp. 1399-1402. ISSN 22147853

Srikanth, Sudhani and Parthiban, A. and Vijayan, V. and Dinesh, S. and Sathish, S. (2021) Experimental Investigation of Nd:YAG Laser Welding of Inconel 625 Alloy Sheet. In: Lecture Notes in Mechanical Engineering. springer, pp. 377-386.

Srimurugan, R. and Vijay Ananth, S. and Geethan, Arunvasantha and Jayaseelan, V. and Xavier, J. Francis (2021) Experimental investigation on diffusion bonding of dissimilar metals. ExperimentalInvestigation on Diffusion Bonding of Dissimilar Metals. 020062.

Sudhagar, S. and Sakthivel, M. and Ajith Arul Daniel, S. (2021) Application of image processing to radiographic image for quantitative assessment of friction stir welding quality of aluminium 2024 alloy. Measurement, 152. p. 107294. ISSN 02632241

Thendral Selvam, P. and Pugazhenthi, R. and Dhanasekaran, C. and Chandrasekaran, M. and Sivaganesan, S. (2021) Experimental Investigation on the Frictional Wear Behaviour of TiAlN Coated Brake Pads. Materials Today: Proceedings, 37. pp. 2419-2426. ISSN 22147853

Tom Scaria, Clement and Pugazhenthi, R. (2021) Effect of process parameter on synthesizing of TiC reinforced Al7075 aluminium alloy nano composites. Materials Today: Proceedings, 37. pp. 1978-1981. ISSN 22147853

V., Santhanam and R., Dhanaraj and M., Chandrasekaran and N., Venkateshwaran and S., Baskar (2021) Experimental investigation on the mechanical properties of woven hybrid fiber reinforced epoxy composite. Materials Today: Proceedings, 37. pp. 1850-1853. ISSN 22147853

Vairavel, M. and Chandrasekaran, M. and Vivek, P. and Vinod Kumar, T. (2021) Empirical performance analysis of VCR engine fuelled with karanja oil and various additives using ANOVA technique. International Journal of Ambient Energy, 41 (4). pp. 369-373. ISSN 0143-0750

Vairavel, M. and Pughazhenthi, R. and Girimurugan, R. and Vinothkumar, S. and N., Poornachandiran (2021) Effects of wear characterization analysis of the friction stir welded joints in aluminum alloy Al3116-Cu and A384 - Cu. Effects of Wear Characterization Analysis of the Friction Stir Welded Joints in Aluminum Alloy Al3116-Cu and A384 - Cu. 020112.

Velavan, K and MuthuKrishnan, T and Srinivasan, T and Sethuvelappan, P and Ramanan, N (2021) Determination of Corrosion Resistance Properties of Al-Sio 2 Composite Material. Journal of Physics: Conference Series, 2070 (1). 012191. ISSN 1742-6588

Vijay Ananth, S. and Srimurugan, R. and Jayaseelan, V. and Geethan, Arunvasantha and Xavier, J. Francis (2021) Experimental investigation on superplastic forming behavior of AA 6063/SiCp using stir casting. Experimental investigation on Superplastic Forming behavior of AA 6063/SiCp using Stir Casting. 020118.

Vijay Ananth, S. and Udayakumar, A. Ramesh and Daniel, Ajith Arul and Poornachandiran, N. (2021) Optimization of machining parameters of Kevlar fibre reinforced composites. Optimization of Machining Parameters of Kevlar Fibre Reinforced Composites. 020117.

Vijayan, V. and Parthiban, A. and Sathish, T. and Sankar, L. Ponraj and Kumar, S. Dinesh and Saravanakumar, S. and Tafesse, Dawit and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Optimization of Reinforced Aluminium Scraps from the Automobile Bumpers with Nickel and Magnesium Oxide in Stir Casting. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Vijayan, V. and Sathish, T. and Saravanan, R. and Premkumar, I. J. Isaac and Basker, Sanjeevi and Parthiban, A. (2021) Synthesize and characterizations of glass/treated selective sisal fiber hybrid composite. Synthesize and Characterizations of Glass / Treated selective Sisal Fiber Hybrid Composite. 020066.

Vinod Kumar, T. and Chandrasekaran, M. and Padmanabhan, S. and Saravanan, R. and Arunkumar, S. (2021) Material and design parameters optimization to enhance the life of Anti-Roll bar of commercial truck. Materials Today: Proceedings, 37. pp. 1359-1366. ISSN 22147853

This list was generated on Wed Mar 12 16:47:42 2025 IST.