Items where Division is "Mechanical Engineering" and Year is 2020

Ajith Arul Daniel, S. and Kumar, R. and VijayAnanth, S. and Pugazhenthi, R. (2020) Multi-objective optimization of drilling of Al5059-SiC-2%MoS2 composites using NSGA-II. Materials Today: Proceedings, 22. pp. 853-857. ISSN 22147853

Arul Peter, A. and Chandrasekaran, M. and Prakash, P. and Kumar, T. Vinod and Vivek, P. (2020) Experimental investigation of a spark ignition engine using blends of biogas. International Journal of Ambient Energy, 41 (4). pp. 462-465. ISSN 0143-0750

Arunkumar, D. and Ramu, M. and Murugan, R. and Kannan, S. and Arun, S. and Baskar, Sanjeevi (2020) Investigation of heat transfer of wall with and without using phase change material. Materials Today: Proceedings, 33. pp. 2646-2650. ISSN 22147853

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Karikalan, L. (2020) Experimental studies on convective heat transfer coefficient of water/ethylene glycol-carbon nanotube nanofluids. International Journal of Ambient Energy, 41 (3). pp. 296-299. ISSN 0143-0750

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Ramasubramanian, S. (2020) Experimental studies on flow and heat transfer characteristics of secondary refrigerant-based CNT nanofluids for cooling applications. International Journal of Ambient Energy, 41 (3). pp. 285-288. ISSN 0143-0750

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and Spiral Spring insert in Double Tube Heat Exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 857-861. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and circular fin insert in double tube heat exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 934-939. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer enhancement through nano-fluids and twisted tape insert with rectangular cut on its rib in a double pipe heat exchanger. Materials Today: Proceedings, 21. pp. 865-869. ISSN 22147853

Jeevahan, Jeya and Chandrasekaran, Manoharan (2020) Influence of Nanocellulose Additive on the Film Properties of Native Rice Starch-based Edible Films for Food Packaging. Recent Patents on Nanotechnology, 13 (3). pp. 222-233. ISSN 18722105

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) CFD Analysis of Twisted Tape Heat Exchanger with Twist Ratio of 3 in Metallic and Ceramic Nano Fluids. International Journal of Vehicle Structures and Systems, 12 (3). ISSN 0975-3060

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Heat Transfer Amplification through Special Tube Inserts and Metallic Nanofluids in Heat Exchanger. International Journal of Vehicle Structures and Systems, 11 (4). ISSN 0975-3060

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Numerical exploration of heat transfer in a heat exchanger tube with cone shape inserts and Al2O3 and CuO nanofluids. Materials Today: Proceedings, 21. pp. 940-947. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C. (2020) Behaviour Of Cottonseed Oil Blended With Single-Walled Carbon Nanotubes In, Direct Injection Single Cylinder Diesel Engine. Materials Today: Proceedings, 24. pp. 2157-2162. ISSN 22147853

Kumar, R. and Hynes, N. Rajesh Jesudoss and Manju, R. and Senthamaraikannan, P. and Saravanakumar, S.S. and Khan, Anish and Bharathi, S.R. Sundara and Asiri, Abdullah Mohamed and Khan, Imran and Khan, Mohammad Mujahid Ali and Verpoort, Francis (2020) Self-healing fiber-reinforced epoxy composites. In: Self-Healing Composite Materials. Elsevier, pp. 393-404.

Kumar, R. and Hynes, N. Rajesh Jesudoss and Saravanakumar, S.S. and Senthamaraikannan, P. and Khan, Anish and Asiri, Abdullah Mohamed and Khan, Imran and Khan, Mohammad Mujahid Ali and Nagarajan, S. (2020) Concept of self-repair and efficiency measurement in polymer matrix composites. In: Self-Healing Composite Materials. Elsevier, pp. 375-391.

Kumar, R. and Hynes, N. Rajesh Jesudoss and Senthamaraikannan, P. and Khan, Anish and Rangappa, Sanjay Mavinkere and Siengchin, Suchart and Bharathi, S.R. Sundara and Asiri, Abdullah Mohamed and Khan, Imran (2020) Self-repairing fiber polymer composites: mechanisms and properties. In: Self-Healing Composite Materials. Elsevier, pp. 71-85.

Mamidi, Vamsi Krishna and Pugazhenthi, R. and Manikandan, G. and Kumar, M. Vinoth (2020) Mechanical and microscopic study on Tinospora cordifolia and Tectona grandis composites. Materials Today: Proceedings, 22. pp. 772-775. ISSN 22147853

Prakash, P. and Dhanasekaran, C. and Surya, K. and Varunny Pius, K. and Vishal, A.S. and Vignesh Kumar, S. (2020) Gesture controlled dual six axis robotic arms with rover using MPU. Materials Today: Proceedings, 21. pp. 547-556. ISSN 22147853

Prakash, P. and Dhanasekaran, C. and Surya, K. and Varunny Pius, K. and Vishal, A.S. and Vignesh Kumar, S. (2020) Wireless motion controlled dual six axis robotic arms with rover. Materials Today: Proceedings, 21. pp. 465-469. ISSN 22147853

Pugazhenthi, R. and Sreeram, D. and Vijay Ananth, S.S. and Devaraju, A. (2020) Surface fracture analysis of stir casted AA 6063/TiC/Gr hybrid composites under different solidification rate. Materials Today: Proceedings, 22. pp. 701-704. ISSN 22147853

Rajasekaran, A. and Pugazhenthi, R. (2020) Study of mechanical properties of stir casted Al7075/SiCp composites after thermomechanical treatment. Materials Today: Proceedings, 22. pp. 766-771. ISSN 22147853

Ramasubramanian, S. and Chandrasekaran, M. (2020) Optimisation of catalytic system for tar mitigation in biomass producer gas. International Journal of Ambient Energy, 41 (6). pp. 621-626. ISSN 0143-0750

S., Anulekshmi (2020) Comprehensive Study and Research on Wireless Sensor Network and Internet of Things for Precision Agriculture. Journal of Advanced Research in Dynamical and Control Systems, 24 (4). pp. 150-158. ISSN 1943023X

Saravanan, R. and Gnanavel, C. (2020) SPM is a right choice for improving quality and reliability and reduction of cost and manufacturing time – A case study. Materials Today: Proceedings, 21. pp. 993-999. ISSN 22147853

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. (2020) Investigation on the effect of thermal barrier coating at different dosing levels of cerium oxide nanoparticle fuel on diesel in a CI engine. International Journal of Ambient Energy, 41 (1). pp. 98-104. ISSN 0143-0750

Srikanth, Sudhani and Parthiban, A. (2020) Microstructural analysis of Nd:YAG laser welding for Inconel alloy. Materials Today: Proceedings, 21. pp. 568-571. ISSN 22147853

Vinod Kumar, T. and Chandrasekara, M. and Padmanabhan, S. and Saravanan, R. and Arunkumar, S. (2020) Influence of cooling design in hot press forming on product quality and productivity– An authentic story. Materials Today: Proceedings, 37. pp. 1349-1355. ISSN 22147853