Items where Division is "Mechanical Engineering" and Year is 2017

Article

Arunkumar, S and Baskaralal, V P M and Muthuraman, V (2017) Comparative Investigation on Modal analysis of LM25 Aluminium alloy with other Aluminim alloys using Finite element analysis software. IOP Conference Series: Materials Science and Engineering, 183. 012011. ISSN 1757-8981

Arunkumar, S and Muthuraman, V and Baskaralal, V P M (2017) Optimization of the Machining parameter of LM6 Alminium alloy in CNC Turning using Taguchi method. IOP Conference Series: Materials Science and Engineering, 183. 012024. ISSN 1757-8981

Gnanavel, C and Saravanan, R and Chandrasekaran, M and Jayakanth, J J (2017) Improvement of Productivity in TIG Welding Plant by Equipment Design in Orbit. IOP Conference Series: Materials Science and Engineering, 183. 012020. ISSN 1757-8981

Gnanavel, C and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Case Study of Cycle Time Reduction by Mechanization in Manufacturing Environment. IOP Conference Series: Materials Science and Engineering, 183. 012023. ISSN 1757-8981

Gnanavel, C and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Restructured review on Electrical Discharge Machining - A state of the art. IOP Conference Series: Materials Science and Engineering, 183. 012015. ISSN 1757-8981

Gopal, P and Bupesh Raja, V K and Chandrasekaran, M and Dhanasekaran, C (2017) Woven Hybrid Composites - Tensile and Flexural Properties of Jute Mat Fibres with Epoxy Composites. IOP Conference Series: Materials Science and Engineering, 183. 012001. ISSN 1757-8981

Gopalakrishnan, T and Raja, M and Jothi Prakash, V M and Gnanavel, C (2017) Design and Fabrication of E-Glass /carbon/graphite epoxy hybrid composite leaf spring. IOP Conference Series: Materials Science and Engineering, 183. 012004. ISSN 1757-8981

Gopalakrishnan, T and Saravanan, R (2017) Cast Off expansion plan by rapid improvement through Optimization tool design, Tool Parameters and using Six Sigma’s ECRS Technique. IOP Conference Series: Materials Science and Engineering, 183. 012016. ISSN 1757-8981

Jayakanth, J J and Ramasubramanian, S and Chandrasekaran, M and Manavalan, S (2017) Investigation of solar water heater by using flat plate collector and evacuated tubes. IOP Conference Series: Materials Science and Engineering, 183. 012035. ISSN 1757-8981

Joseph Irudaya raja, S and Vinod Kumar, T and Sridhar, R and Vivek, P (2017) Experimental Investigation of Thermal Properties in Glass Fiber Reinforced with Aluminium. IOP Conference Series: Materials Science and Engineering, 183. 012005. ISSN 1757-8981

Karikalan, L. and Chandrasekaran, M. (2017) Performance and pollutants analysis on diesel engine using blends of Jatropha Biodiesel and Mineral Turpentine as fuel. International Journal of Environmental Science and Technology, 14 (2). pp. 323-330. ISSN 1735-1472

Karunakaran, K and Chandrasekaran, M (2017) Experimental Investigation Nano Particles Influence in NPMEDM to Machine Inconel 800 with Electrolyte Copper Electrode. IOP Conference Series: Materials Science and Engineering, 197. 012068. ISSN 1757-8981

Karunakaran, K. and Chandrasekaran, M. (2017) Investigation of Machine-ability of Inconel 800 in EDM with Coated Electrode. IOP Conference Series: Materials Science and Engineering, 183. 012014. ISSN 1757-8981

Karunakaran, K. and Chandrasekaran, M. and Yuan, H.L. and Agarwal, R.K. and Tandon, P. and Wang, E.X. (2017) Influence of Process Parameters in n-PMEDM of Inconel 800 with Electrode and Coated Electrodes. MATEC Web of Conferences, 95. 02002. ISSN 2261-236X

Loganathan, Karikalan and Manoharan, Chandrasekaran (2017) Evaluation of performance and emission features of Jatropha biodiesel -turpentine blend as green fuel. Thermal Science, 21 (1 Part). pp. 615-625. ISSN 0354-9836

Manimaran, A. and Muthuraman, V. (2017) Interaction between tolerance levels of people and adoption of green supply chain management practices: an empirical case study in the domestic appliances industry. International Journal of Environment, Workplace and Employment, 4 (3). p. 205. ISSN 1741-8437

Murali, S and Jothi Prakash, V M and Vishal, S (2017) Modeling and Prototyping of Automatic Clutch System for Light Vehicles. IOP Conference Series: Materials Science and Engineering, 183. 012019. ISSN 1757-8981

Muthuraman, V and Arunkumar, S (2017) Experimental evaluation of machining parameters in machining of 7075 aluminium alloy with cryogenic liquid nitrogen coolant. IOP Conference Series: Materials Science and Engineering, 183. 012012. ISSN 1757-8981

Padmanabhan, S and Chandrasekaran, M and Ganesan, S and Khan patan, Mahamed Naveed and Navakanth, Polina (2017) Optimal Solution for an Engineering Applications Using Modified Artificial Immune System. IOP Conference Series: Materials Science and Engineering, 183. 012025. ISSN 1757-8981

Parthiban, A and Pugazhenthi, R and Ravikumar, R and Vivek, P (2017) Experimental Investigation of Turning Parameters on AA 6061-T6 Material. IOP Conference Series: Materials Science and Engineering, 183. 012013. ISSN 1757-8981

Parthiban, A and Sathish, S and Chandrasekaran, M (2017) Optimization of Abrasive Water Jet Cutting Parameter for AISI 316L Stainless Steel Sheet. Journal of Applied Fluid Mechanics, 10 (SI). ISSN 17353572

Parthiban, A and Sathish, S and Chandrasekaran, M and Ravikumar, R (2017) Optimization of CO 2 laser cutting parameters on Austenitic type Stainless steel sheet. IOP Conference Series: Materials Science and Engineering, 183. 012022. ISSN 1757-8981

Pugazhenthi, R and Chandrasekaran, M and Muthuraman, R K and Vivek, P and Parthiban, A (2017) A Comparative Characteristic Study of Jatropha and Cardanol Biodiesel Blends. IOP Conference Series: Materials Science and Engineering, 183. 012038. ISSN 1757-8981

Rajasekar, K and Pugazhenthi, R and Selvaraju, A and Manikandan, T and Saravanan, R (2017) Effect on air quality and flow rate of fresh water production in humidification and dehumidification system. IOP Conference Series: Materials Science and Engineering, 183. 012032. ISSN 1757-8981

Ramasubramanian, S and Raja, V K Bupesh (2017) Review on Enhanced Heat Transfer Techniques using Modern Technologies for 4S Air Cooled Engines. IOP Conference Series: Materials Science and Engineering, 197. 012019. ISSN 1757-8981

Sathish, T. and Jayaprakash, J. and Senthil, P.V. and Saravanan, R. (2017) Multi period disassembly-to-order of end of life product based on scheduling to maximize the profit in reverse logistic operation. FME Transactions, 45 (1). pp. 172-180. ISSN 1451-2092

Sivaganesan, S and Chandrasekaran, M and Ruban, M (2017) Impact of Various Compression Ratio on the Compression Ignition Engine with Diesel and Jatropha Biodiesel. IOP Conference Series: Materials Science and Engineering, 183. 012039. ISSN 1757-8981

Sridhar, R and Chandrasekaran, M and Sriramya, C and Page, Tom (2017) Optimization of heterogeneous Bin packing using adaptive genetic algorithm. IOP Conference Series: Materials Science and Engineering, 183. 012026. ISSN 1757-8981

Vijaya Ramnath, B and Sharavanan, S and Jeykrishnan, J (2017) Optimization of process parameters in drilling of fibre hybrid composite using Taguchi and grey relational analysis. IOP Conference Series: Materials Science and Engineering, 183. 012003. ISSN 1757-8981

Vinod Kumar, T and Chandrasekaran, M and Santhanam, V and Sudharsan, V D (2017) Effect of Coupling Agent on Mechanical Properties of Palm Petiole Nanofiber Reinforced Composite. IOP Conference Series: Materials Science and Engineering, 183. 012006. ISSN 1757-8981

Vinod Kumar, T and Chandrasekaran, M and Santhanam, V and Udayakumar, N (2017) Characterization of Nylon 6 Nano Fiber/E-Glass Fiber Reinforced Epoxy Composites. IOP Conference Series: Materials Science and Engineering, 183. 012002. ISSN 1757-8981

Vivek, P and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Critical Machine Based Scheduling -A Review. IOP Conference Series: Materials Science and Engineering, 183. 012027. ISSN 1757-8981

Vivek, P and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Heuristic for Critical Machine Based a Lot Streaming for Two-Stage Hybrid Production Environment. IOP Conference Series: Materials Science and Engineering, 183. 012030. ISSN 1757-8981