Items where Author is "Vinod Kumar, T."

Article

Sambandam, Padmanabhan and James Raj, Deepak and Vinod Kumar, T. and Muthiya, Solomon Jenoris and Subramanian, Mohankumar and Pachamuthu, Senthilkumar and Praveen Kumar, T (2024) Investigation of the environmental implications of using cerium oxide nano-additives in gasoline engines fueled with gasoline-oxyhydrogen. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 46 (1). pp. 75-94. ISSN 1556-7036

Padmanabhan, S. and Joel, C. and Mahalingam, S. and Deepak, J. R. and Vinod Kumar, T. and Raj, Deborah (2024) An Overview of the Need for Circular Economy on Electric Vehicle Batteries. Nature Environment and Pollution Technology, 23 (1). pp. 183-191. ISSN 23953454

SAMBANDAM, Padmanabhan and Vinod Kumar, T. and MAHALİNGAM, S and S, Ganesan and K, Giridharan (2023) Sustainability improvement by utilizing polymer waste as an energy source for a diesel engine with alcohol additives. Environmental Research and Technology, 6 (1). pp. 35-45. ISSN 2636-8498

Arunkumar, S. and Siva Ramakrishna, Ch. and Alphin, M.S. and Muraliraja, R. and Vinod Kumar, T. and Vishwakarma, Bhaskar and Agrawal, Vandana and Yadav, Anil Singh (2023) Optimization of stirrer speed on mechanical properties of aluminium graphite stir cast. Materials Today: Proceedings. ISSN 22147853

Padmanabhan, S. and Vinod Kumar, T. and Thiagarajan, S. and Gopi Krishna, B. and Sudheer, K. (2023) Investigation of lightweight wheel design using alloy materials through structural analysis. Materials Today: Proceedings. ISSN 22147853

Arunkumar, S. and Sriraman, N. and Muraliraja, R. and Vinod Kumar, T. and Muthuraman, V. (2023) Performance evolution in machining parameter of Al-Si (LM6) alloy using neural network. Materials Today: Proceedings. ISSN 22147853

Padmanabhan, S. and Vinod Kumar, T. and Sendil Kumar, D. and Velmurugan, Gowsikan and Akshay Kumar, B. and Hitesh Sri Subramanyam, K. (2023) Investigation of structural and thermal analysis of clutch facings with different friction materials. Materials Today: Proceedings, 92. pp. 98-105. ISSN 22147853

Padmanabhan, S. and Vinod Kumar, T. and Giridharan, K. and Stalin, B. and Nagaprasad, N. and Jule, Leta Tesfaye and Ramaswamy, Krishnaraj (2022) An analysis of environment effect on ethanol blends with plastic fuel and blend optimization using a full factorial design. Scientific Reports, 12 (1). ISSN 2045-2322

Muraliraja, R. and Pradeepkumar, K. and Mohanraj, P. and Vinod Kumar, T. and Dhanasekaran, C. and Chandrasekaran, M. and Ragavanantham, S. and Shaisundaram, V. S. (2022) The Effects of Electroless Ni-P Coated SiC on the Properties of Magnesium Composite. Materials Performance and Characterization, 11 (1). p. 20210089. ISSN 23791365

Bhargavi, Maridu and Vinod Kumar, T. and Ali Azmath Shaik, Reddypalli and Kishore Kanna, S. and Padmanabhan, S. (2022) Effective utilization and optimization of waste plastic oil with ethanol additive in diesel engine using full factorial design. Materials Today: Proceedings, 52. pp. 930-936. ISSN 22147853

Selvam, M. Amala Justus and Arunkumar, S. and Balambica, V. and Padmanabhan, S. and Vinod Kumar, T. and Shai Sundaram, V.S. (2022) Influence of copper anodization on structural and heat transfer characteristic of aluminum piston. Materials Today: Proceedings, 59. pp. 1407-1413. ISSN 22147853

Hemadri, Kadapa and Ajith Arul Daniel, S. and Parthiban, A. and Vinod Kumar, T. (2022) Investigation on the response parameters in electric discharge machining of developed aluminium metal matrix composites. Materials Today: Proceedings, 68. pp. 1214-1218. ISSN 22147853

Abhishek Krishna Sai, A. and Chandrasekaran, M. and Vinod Kumar, T. and Pugazhenthi, R. (2022) Study the enhanced mechanical properties of Al/B4C metal matrix composite. Materials Today: Proceedings, 68. pp. 1422-1428. ISSN 22147853

Padmanabhan, S. and Vinod Kumar, T. and Chandrasekaran, M. and Ganesan, S. (2021) Investigation of Sapindus seed biodiesel with nano additive on single cylinder diesel engine. International Journal of Ambient Energy, 41 (10). pp. 1106-1109. ISSN 0143-0750

Arunkumar, S. and Dhanasekaran, C. and Muthuraman, V. and Vinod Kumar, T. (2021) Modelling and stress analysis of shaft used in hydraulic streeing pump. Materials Today: Proceedings, 37. pp. 2474-2477. ISSN 22147853

Vairavel, M. and Chandrasekaran, M. and Vivek, P. and Vinod Kumar, T. (2021) Empirical performance analysis of VCR engine fuelled with karanja oil and various additives using ANOVA technique. International Journal of Ambient Energy, 41 (4). pp. 369-373. ISSN 0143-0750

Vinod Kumar, T. and Chandrasekaran, M. and Padmanabhan, S. and Saravanan, R. and Arunkumar, S. (2021) Material and design parameters optimization to enhance the life of Anti-Roll bar of commercial truck. Materials Today: Proceedings, 37. pp. 1359-1366. ISSN 22147853

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V. and Vinod Kumar, T. (2021) Study properties and mechanical behavior of the shaft material 16MnCr5. Materials Today: Proceedings, 37. pp. 2458-2461. ISSN 22147853

Arul Peter, A. and Chandrasekaran, M. and Prakash, P. and Vinod Kumar, T. and Vivek, P. (2020) Experimental investigation of a spark ignition engine using blends of biogas. International Journal of Ambient Energy, 41 (4). pp. 462-465. ISSN 0143-0750

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Karikalan, L. (2020) Experimental studies on convective heat transfer coefficient of water/ethylene glycol-carbon nanotube nanofluids. International Journal of Ambient Energy, 41 (3). pp. 296-299. ISSN 0143-0750

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Ramasubramanian, S. (2020) Experimental studies on flow and heat transfer characteristics of secondary refrigerant-based CNT nanofluids for cooling applications. International Journal of Ambient Energy, 41 (3). pp. 285-288. ISSN 0143-0750

Vinod Kumar, T. and Chandrasekara, M. and Padmanabhan, S. and Saravanan, R. and Arunkumar, S. (2020) Influence of cooling design in hot press forming on product quality and productivity– An authentic story. Materials Today: Proceedings, 37. pp. 1349-1355. ISSN 22147853

Vinod Kumar, T. and Chandrasekaran, M. and Vivek, P. and Arunkumar, S. and Padmanabhan, S. (2019) Evaluating the Mechanical Properties of Snake Grass Fibre and Sisal Fibre Hybrid Composites by Injection Moulding Method. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Karikalan, L. and Chandrasekaran, M. and Vinod Kumar, T. and Sridhar, R. (2019) Behaviour of CI engine performance, combustion and exhaust emission with neem biodiesel at varied fuel injection rates. International Journal of Ambient Energy, 40 (7). pp. 749-753. ISSN 0143-0750

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. and Vinod Kumar, T. (2019) Control of carbon dioxide emission in automobile vehicles using CO 2 scrubber. International Journal of Ambient Energy, 40 (7). pp. 699-703. ISSN 0143-0750

Vinod Kumar, T. and Chandrasekaran, M. and Vivek, P. and Arunkumar, S. and Padmanabhan, S. (2019) Mechanical Characterization of Roselle and Sisal Fibre Reinforced Polymer Composites. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Vinod Kumar, T. and Chandrasekaran, M. and Mohanraj, P and Balasubramanian, Ravishankar and Muraliraja, R. and S. Shaisundaram, V (2018) Fillers preparation for polymer composite and its properties – a review. International Journal of Engineering & Technology, 7 (3.3). p. 212. ISSN 2227-524X

Sathish, S and Parthiban, A and Vinod Kumar, T. and Chandrasekaran, M. (2017) Analysis of Biomethanation Process from market waste to generate bio energy. IOP Conference Series: Materials Science and Engineering, 183. 012031. ISSN 1757-8981

Vinod Kumar, T. and Chandrasekaran, M. and Santhanam, V and Udayakumar, N (2017) Characterization of Nylon 6 Nano Fiber/E-Glass Fiber Reinforced Epoxy Composites. IOP Conference Series: Materials Science and Engineering, 183. 012002. ISSN 1757-8981

Vinod Kumar, T. and Chandrasekaran, M. and Santhanam, V and Sudharsan, V D (2017) Effect of Coupling Agent on Mechanical Properties of Palm Petiole Nanofiber Reinforced Composite. IOP Conference Series: Materials Science and Engineering, 183. 012006. ISSN 1757-8981

Joseph Irudaya Raja, S. and Vinod Kumar, T. and Sridhar, R. and Vivek, P (2017) Experimental Investigation of Thermal Properties in Glass Fiber Reinforced with Aluminium. IOP Conference Series: Materials Science and Engineering, 183. 012005. ISSN 1757-8981

Vinod Kumar, T. and Chandrasekaran, M. and Santhanam2, V. CHARACTERISTICS ANALYSIS OF COCONUT SHELL HUSK REINFORCED POLYMER COMPOSITES. CHARACTERISTICS ANALYSIS OF COCONUT SHELL HUSK REINFORCED POLYMER COMPOSITES.

Parthiban, A. and Chandrasekaran, M. and Sathish, S and Vinod Kumar, T. COMPREHENSIVE ANALYSIS OF MILLING PARAMETERS ON ALUMINIUM ALLOYS. COMPREHENSIVE ANALYSIS OF MILLING PARAMETERS ON ALUMINIUM ALLOYS.

Vinod Kumar, T. and Muraliraja, R. and Chandrasekaran, M. Optimization of process parameters to improve the wear resistance of the mild steel using electroless Ni-P coating process. https://jurnaltribologi.mytribos.org/v31/JT-31-1-12.pdf.