Items where Author is "Sivaganesan, S."

Manickavelan, K. and Sivaganesan, S. and Sivamani, S. and Kulkarni, Mithun V. (2024) Response Surface Optimization of Brake Thermal Efficiency and Specific Fuel Consumption of Spark-Ignition Engine Fueled with Gasoline–Pyrooil and Gasoline–Pyrooil–Ethanol Blends. SAE International Journal of Fuels and Lubricants, 18 (1). ISSN 1946-3952

Manickavelan, K. and Sivaganesan, S. and Kulkarni, Mithun Vinayaka and Sivamani, S. (2024) Response surface design, modelling and analysis on pyrolysis of waste high-density polyethylene (HDPE). Journal of Material Cycles and Waste Management, 26 (1). pp. 491-500. ISSN 1438-4957

Sravya, Navuluri Padma and Sivaganesan, S. and Venkatesh, R. and Manikandan, R. (2023) Effect of alkaline treatment on mechanical properties of palmyra and S-glass fiber reinforced epoxy nanocomposites. Archives of Civil and Mechanical Engineering, 23 (2). ISSN 1644-9665

Muzeer, S. and Sivaganesan, S. (2022) Wear Optimization of Aluminium and Hybrid Reinforcement Metal Matrix Composites Using Response Surface Methodology. Materials Science Forum, 1073. pp. 37-48. ISSN 1662-9752

Udayakumar, M. and Sivaganesan, S. and Sivamani, S. (2022) Process optimization of KOH catalyzed biodiesel production from crude sunflower-mahua oil. Biofuels, 13 (8). pp. 1031-1039. ISSN 1759-7269

Ravi Kulkarni, H. and Dhanasekaran, C. and Rathnakumar, P. and Sivaganesan, S. (2022) Experimental study on thermal analysis of helical coil heat exchanger using Green synthesis silver nanofluid. Materials Today: Proceedings, 42. pp. 1037-1042. ISSN 22147853

Udaya Kumar, M. and Sivaganesan, S. and Dhanasekaran, C. and Parthiban, A. (2022) Analysis of performance, combustion and emission parameters in di diesel engine by using mahua methyl ester along with nano metal additives titanium dioxide. Materials Today: Proceedings, 37. pp. 3404-3410. ISSN 22147853

Kumar, R. and Sivaganesan, S. and Senthamaraikannan, P. and Saravanakumar, S. S. and Khan, Anish and Ajith Arul Daniel, S. and Loganathan, L. (2022) Characterization of New Cellulosic Fiber from the Bark of Acacia nilotica L . Plant. Journal of Natural Fibers, 19 (1). pp. 199-208. ISSN 1544-0478

Banupriya, S. and Sri Balaji, P. and Kalyana Chakravarthy, P.R. and Suresh, S. and Sivaganesan, S. (2022) Analyse and investigate the geopolymer based concrete. Materials Today: Proceedings, 60. pp. 1487-1490. ISSN 22147853

Kalyana Chakravarthy, P.R. and Suganya, R. and Nivedhitha, M. and Parthiban, A. and Sivaganesan, S. (2022) Barriers and project management practices in green buildings. Materials Today: Proceedings, 52. pp. 1131-1134. ISSN 22147853

Kulkarni, H. Ravi and Dhanasekaran, C. and Rathnakumar, P. and Mohamed Iqbal, S. and Sivaganesan, S. (2022) Biosynthesized zinc nano fluid for helically coiled heat exchanger at constant heat flux. Materials Today: Proceedings, 58. pp. 104-113. ISSN 22147853

Ahmed, Ansari Faiyaz and Sivaganesan, S. (2022) Characterization of material properties of green polymer composite. Materials Today: Proceedings, 69. pp. 789-792. ISSN 22147853

Kalyana Chakravarthy, P.R. and Rakesh, R. and Kiran, T. and Sivaganesan, S. and Parthiban, A. (2022) Experimental investigation on concrete subjected to direct shear test. Materials Today: Proceedings, 60. pp. 1474-1479. ISSN 22147853

Raja S., Joseph Irudaya and Sivaganesan, S. and Pugazhenthi, R. (2022) Fractural behaviour analysis of areca nut fiber reinforced with epoxy resin. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Maheshwaran, R. and Dhanasekaran, C. and Sivaganesan, S. and Pugazhenthi, R. (2022) Investigation of Mechanical Behavior of Biodegradable Natural Composite PLA Reinforced with Snake Grass Fiber and Sisal Fiber. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 165-173.

Ravi Kulkarni, H. and Dhanasekaran, C. and Rathnakumar, P. and Geo Varuvel, Edwin and Sivaganesan, S. and Anantachar, M. (2022) Investigation on performance of bio synthesized copper nano fluid in helical coil and shell type heat exchanger. Materials Today: Proceedings, 52. pp. 862-866. ISSN 22147853

Kukanur, Vijayendra and Ajith Arul Daniel, S. and Sivaganesan, S. and Algur, Veerabhadrappa (2022) Mechanical properties of silicon nitride fortified aluminium based metal matrix composites – A review. Materials Today: Proceedings, 68. pp. 1733-1736. ISSN 22147853

Udayakumar, M. and Sivaganesan, S. and Sivamani, S. (2022) Performance and emissions of lemon peel oil biodiesel powered single cylinder direct injection diesel engine loaded with ceria nanoparticles additives and stabilized zirconia coating. Materials Today: Proceedings, 66. pp. 1994-2000. ISSN 22147853

Kamalakannan, K. and Sivaganesan, S. and Dhanasekaran, C. and Pugazhenthi, R. (2022) A Study on the Mechanical Properties of Alkali Treated Natural Reinforced Fiber Composites. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 673-682.

Mahaviradhan, N. and Sivaganesan, S. and Padma Sravya, N. and Parthiban, A. (2021) Experimental investigation on mechanical properties of carbon fiber reinforced aluminum metal matrix composite. Materials Today: Proceedings, 39. pp. 743-747. ISSN 22147853

Parthiban, A. and Dhanasekaran, C. and Sivaganesan, S. and Sathish, S. (2021) Modeling on surface cut quality of CO2 laser cutting for Austenitic Stainless steel sheet. Materials Today: Proceedings, 21. pp. 823-827. ISSN 22147853

Ajith, Arul Daniel S. and Dhanasekeran, C. and Sivaganesan, S. and Sridhar, R. (2021) Investigation on the Mechanical Properties of Silicon Carbide Particulates in Al/SiC/MoS₂. Materials Science Forum, 979. pp. 89-94. ISSN 1662-9752

Poovazhgan, Lakshmanan and Vijayananth, Suyamburajan and Sivaganesan, S. (2021) Optimizing Ultrasonic Power on Fabricating Aluminum Nanocomposites Reinforced with Boron Carbide Nanoparticles. Materials Science Forum, 979. pp. 28-33. ISSN 1662-9752

Thendral Selvam, P. and Pugazhenthi, R. and Dhanasekaran, C. and Chandrasekaran, M. and Sivaganesan, S. (2021) Experimental Investigation on the Frictional Wear Behaviour of TiAlN Coated Brake Pads. Materials Today: Proceedings, 37. pp. 2419-2426. ISSN 22147853

Joseph Irudaya Raja, S. and Sivaganesan, S. (2021) Experimental investigation on wear properties with micro-structure behavior of arecanut reinforced polymer composite material. Materials Today: Proceedings, 39. pp. 682-689. ISSN 22147853

Ajith Arul Daniel, S. and Parthiban, A. and Sivaganesan, S. and Vijay Ananth, S. (2021) Investigation on Surface Roughness in Drilling of al/SiC/MoS2 Metal Matrix Composites. In: Lecture Notes in Mechanical Engineering. springer, pp. 717-724.

Sravya, Navuluri Padma and Sivaganesan, S. (2021) Mechanical Characterization of Palmyra- and S Glass Fibre-Reinforced Hybrid Polymer Composites. In: Lecture Notes in Mechanical Engineering. springer, pp. 1087-1096.

Mahaviradhan, N. and Sivaganesan, S. (2021) Tribological analysis of hybrid aluminum matrix composites for high temperature applications. Materials Today: Proceedings, 39. pp. 669-675. ISSN 22147853

Daniel, S. Ajith Arul and Ananth, S. Vijay and Parthiban, A. and Sivaganesan, S. (2020) Optimization of machining parameters in electro chemical machining of Al5059/SiC/MoS2 composites using taguchi method. Materials Today: Proceedings, 21. pp. 738-743. ISSN 22147853

Sivaganesan, S. and Ferdaus, F. and Dhanasekaran, C. and Sathishkumar, G. and Sivabalan, S. (2019) CFD Analysis of Aircraft Curved C-D Nozzle: Technical Note. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Sathishkumar, G. and Irudayaraja, S.J. and Sivaganesan, S. and Thuyavan, M. (2019) Synthesis and Characterization of Al 7075 Alloy Reinforced with Silicon Carbide and Fly Ash. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Sathishkumar, G. and Irudayaraja, S.J. and Sivaganesan, S. and Thuyavan, M. (2019) Synthesis and Characterization of Al 7075 Alloy Reinforced with Silicon Carbide and Fly Ash. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Pugazhenthi, R. and Sivaganesan, S. and Dhansekaran, C. and Parthiban, A. (2019) Morphological and Mechanical Characteristics of Hybrid Aluminium Matrix Composites. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Sivaganesan, S. and Chandrasekaran, M. and Ramasubramanian, S. and Gnanavel, C. (2018) The influence of bio additive on the compression ignition engine with diesel and Jatropha methyl ester biodiesel. International Journal of Ambient Energy, 39 (4). pp. 377-381. ISSN 0143-0750

Sivaganesan, S. (2018) The Impact of Various Compression Ratio and Influence of Bio Additive With Jatropha Methyl Ester Biodiesel in DI Diesel Engine. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 989-996. ISSN 2249-6890

Sivaganesan, S. and Chandrasekaran, M. (2016) Performance and Emission Analysis of Compression Ignition Engine with Methyl Ester of Jatropha and Diesel. Indian Journal of Science and Technology, 9 (26). ISSN 0974-6846

Sivaganesan, S. and Chandrasekaran, M. THE INFLUENCE OF THERMAL BARRIER COATING ON THE COMBUSTION AND EXHAUST EMISSION IN TURPENTINE OIL POWERED DI DIESEL ENGINE. ARPN Journal of Engineering and Applied Sciences.