Items where Author is "Sathish, T."

Article

Sunheriya, Neeraj and Giri, Jayant and Sathish, T. and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. and Barmavatu, Praveen (2024) Evaluation of a helical coil heat exchanger in a forced convection environment. Interactions, 245 (1). ISSN 3005-0731

Thejasree, P. and Manikandan, N. and Sunheriya, Neeraj and Giri, Jayant and Sathish, T. and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. (2024) Application of ANFIS approach for prediction of performance measures in wire electric discharge machining of SAE 1010. Interactions, 245 (1). ISSN 3005-0731

karthik, Ganapathi and Parthiban, A. and Sathish, T. and Giri, Jayant (2024) Experimental analysis and development of fuzzy model for the prediction of COP and mass flow rate in air-conditioning system. Interactions, 245 (1). ISSN 3005-0731

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. (2024) Flexural properties of jute/kenaf/glass fibre reinforced nano-composite. Interactions, 245 (1). ISSN 3005-0731

Pavan Kishore, M. L. and Madhavi, B. and Pati, Pravat Ranjan and Pugazhenthi, R. and Giri, Jayant and Sathish, T. and Parthiban, A. (2024) Free vibration analysis of composite aircraft wing. Interactions, 245 (1). ISSN 3005-0731

Chaudhari, Sharad S. and Pundkar, A. H. and Giri, Jayant and Sathish, T. and Daryapurkar, A. S. and Chadge, Rajkumar and Parthiban, A. (2024) Optimizing air conditioning efficiency: Utilizing nano-oxides ZnO, CuO, and TiO2 with traditional and alternative refrigerants in medium temperature range cooling systems. Interactions, 245 (1). ISSN 3005-0731

Adakane, Rakesh and Washimkar, Prashant V. and Chaudhari, Sharad S. and Giri, Jayant and Sathish, T. and Parthiban, A. and Mahatme, Chetan (2024) Prediction and analysis of material removal rate and Tool wear for electric discharge machining of H16 material using ANN and ANOVA. Interactions, 245 (1). ISSN 3005-0731

Purohit, Abhilash and Dehury, Janaki and Sitani, Ayush and Pati, Pravat Ranjan and Giri, Jayant and Sathish, T. and Parthiban, A. (2024) A novel study on the stacking sequence and mechanical properties of Jute-Kevlar-Epoxy composites. Interactions, 245 (1). ISSN 3005-0731

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. and Giri, Jayant (2024) Comparing Kevlar Fiber influence on PP/sisal/SiO2 nanoparticle fillers/Kevlar hybrid nanocomposites with plain nanocomposite for enhanced mechanical properties. Interactions, 245 (1). ISSN 3005-0731

Giri, Jayant and Sathish, T. and Sheikh, Taukeer and Sunheriya, Neeraj and Giri, Pallavi and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. (2024) Automatic liver segmentation using U-Net deep learning architecture for additive manufacturing. Interactions, 245 (1). ISSN 3005-0731

Giri, Jayant and Sunheriya, Neeraj and Sathish, T. and Kadu, Yash and Chadge, Rajkumar and Giri, Pallavi and Parthiban, A. and Mahatme, Chetan (2024) Optimization of process parameters to improve mechanical properties of fused deposition method using taguchi method. Interactions, 245 (1). ISSN 3005-0731

Arunachalam, S. Jothi and Saravanan, R. and Sathish, T. and Parthiban, A. (2024) Effect of nano-particle weight percent on the flexural strength of Jute/kenaf/glass fiber composite using RSM. Interactions, 245 (1). ISSN 3005-0731

Arunachalam, S. Jothi and Saravanan, R. and Sathish, T. and Parthiban, A. (2024) Comprehensive insights on mechanical properties of natural-synthetic fibres with nano-graphene composite. Interactions, 245 (1). ISSN 3005-0731

Sathish, T. and Parthiban, A. (2024) Electrical instruments based thermal conductivity optimization on sintering of nanocomposites of Al and TiB with and without fly ash. Interactions, 245 (1). ISSN 3005-0731

Muthukumaran, R. and Daniel, Ajith Arul and Nithya, M. and Parthiban, A. and Sathish, T. and Giri, Jayant and Al-Lohedan, Hamad A. (2024) Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite. AIP Advances, 14 (4). ISSN 2158-3226

Parthiban, A. and Sathish, S. and Suthan, R. and Sathish, T. and Rajasimman, M. and Vijayan, V. and Jayaprabakar, J. (2023) Modelling and optimization of thermophilic anaerobic digestion using biowaste. Environmental Research, 220. p. 115075. ISSN 00139351

Kamatchi, R. Muthu and Muraliraja, R. and Sabari Bharathi, C. and Sathish, T. and Sathyaraj, S. and Kumar, Leevesh and Senthilkumar, N. (2023) Preparation of Nanosize Bone Powder from Waste and Development of Al Composite through Squeeze Casting Process. Journal of Nanomaterials, 2023. pp. 1-11. ISSN 1687-4110

Premkumar, I. J. Isaac and Basker, Sanjeevi and Saravanan, R. and Vijayan, V. and Parthiban, A. and Sathish, T. (2021) Dwindling setup time through a low-cost mechanization – A case study. Dwindling Setup Time through a Low-Cost Mechanization – A Case Study. 020068.

Parthiban, A. and Vijayan, V. and Saravanan, R. and Sathish, T. and Premkumar, I. J. Isaac and Basker, Sanjeevi (2021) Experimental investigation glass/sodium oxidanide treated banana fiber hybrid. Experimental Investigation Glass/ sodium oxidanide Treated Banana Fiber Hybrid. 020064.

Basker, Sanjeevi and Parthiban, A. and Saravanan, R. and Vijayan, V. and Sathish, T. and Premkumar, I. J. Isaac (2021) Influence of chemical treatment in synthesize and characterization sisal/glass hybrid composite. Influence of Chemical Treatment in Synthesize and Characterization Sisal/Glass Hybrid Composite. 020065.

Vijayan, V. and Sathish, T. and Saravanan, R. and Premkumar, I. J. Isaac and Basker, Sanjeevi and Parthiban, A. (2021) Synthesize and characterizations of glass/treated selective sisal fiber hybrid composite. Synthesize and Characterizations of Glass / Treated selective Sisal Fiber Hybrid Composite. 020066.

Sathish, T. and Premkumar, I. J. Isaac and Saravanan, R. and Basker, Sanjeevi and Parthiban, A. and Vijayan, V. (2021) Multiply of process speed, quality and safety through low-cost automation – A case study. Multiply ofProcess Speed, Quality and Safety through Low- Cost Automation –A Case Study. 020067.

Vijayan, V. and Parthiban, A. and Sathish, T. and Sankar, L. Ponraj and Kumar, S. Dinesh and Saravanakumar, S. and Tafesse, Dawit and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Optimization of Reinforced Aluminium Scraps from the Automobile Bumpers with Nickel and Magnesium Oxide in Stir Casting. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Ponraj Sankar, L. and Aruna, G. and Sathish, T. and Parthiban, A. and Vijayan, V. and Dinesh Kumar, S. and Rajkumar, S. and Mekonnen, Addisalem and Tufa, Mebratu and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Strength Enhancement Study on Composites of AA6066 Aluminium Alloy with Magnesium Oxide and Coal Ash. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Parthiban, A. and Vijayan, V. and Sathish, T. and Dinesh Kumar, S. and Ponraj Sankar, L. and Parthipan, N. and Tafesse, Dawit and Tufa, Mebratu and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Parameters of Porosity and Compressive Strength‐Based Optimization on Reinforced Aluminium from the Recycled Waste Automobile Frames. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Dinesh Kumar, S. and Ponraj Sankar, L. and Sathish, T. and Vijayan, V. and Parthiban, A. and Kamalakannan, R. and Rajkumar, S. and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Improving the Mechanical Properties of Natural Fiber Composites of Hemp Fiber with Ramie and Banana Fiber through Compression Molding Method. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Saravanan, S. and Vijayan, V. and Balan, A.V. and Sathish, T. and Parthiban, A. (2020) Exploration on Surface Roughness in Abrasive Water Jet Cutting of AA6063-TiC Composites for Vehicle Structural Applications. International Journal of Vehicle Structures and Systems, 11 (4). ISSN 0975-3060

Sathish, T. and Jayaprakash, J. and Senthil, P.V. and Saravanan, R. (2017) Multi period disassembly-to-order of end of life product based on scheduling to maximize the profit in reverse logistic operation. FME Transactions, 45 (1). pp. 172-180. ISSN 1451-2092