Items where Author is "Saravanan, R."

Article

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. (2024) Flexural properties of jute/kenaf/glass fibre reinforced nano-composite. Interactions, 245 (1). ISSN 3005-0731

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. and Giri, Jayant (2024) Comparing Kevlar Fiber influence on PP/sisal/SiO2 nanoparticle fillers/Kevlar hybrid nanocomposites with plain nanocomposite for enhanced mechanical properties. Interactions, 245 (1). ISSN 3005-0731

Arunachalam, S. Jothi and Saravanan, R. and Sathish, T. and Parthiban, A. (2024) Effect of nano-particle weight percent on the flexural strength of Jute/kenaf/glass fiber composite using RSM. Interactions, 245 (1). ISSN 3005-0731

Arunachalam, S. Jothi and Saravanan, R. and Sathish, T. and Parthiban, A. (2024) Comprehensive insights on mechanical properties of natural-synthetic fibres with nano-graphene composite. Interactions, 245 (1). ISSN 3005-0731

Rajesh, G. and Thiyagaraj, J. and Jagath Narayana, K. and Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Satyanarayana Gupta, M. (2023) Microstructure and mechanical properties of AZ91D/Si3N4 composites using squeeze casting method. Materials Today: Proceedings. ISSN 22147853

Saravanan, R. and Gnanavel, C. and Ajith Arul Daniel, S. and Rajesh, S. and Kamatchi, T. and Anbuchezhiyan, G. and Sreekanth, S. (2023) Analysis of mechanical properties enhancement on composites of AA7175 by multi walled carbon nano tube (MWCNT). Materials Today: Proceedings. ISSN 22147853

Amuthan, T. and Saravanan, R. and Gnanavel, C. and Manikandan, R. and Jagadeeswaran, P. and Anbuchezhiyan, G. and Ganesh, M. (2023) Cutting zone temperature reduction in by using novel nanofluid in SAE1144 machining. Materials Today: Proceedings. ISSN 22147853

Gopalakrishnan, T. and Saravanan, R. and Malladi, Avinash and Manikandan, R. and Jagadeeswaran, P. and Anbuchezhiyan, G. and Ganesh, M. (2023) Effects of Molybdenum disulfide nano-particles’ concentration on waste cooking oil nanofluid in reduction feed force in CNC wet machining of SAE 1144 steel. Materials Today: Proceedings. ISSN 22147853

Saravanan, R. and Malladi, Avinash and Gopalakrishnan, T. and Manikandan, R. and Jagadeeswaran, P. and Anbuchezhiyan, G. and Veeranjaneyulu, K. (2023) Investigating concentration of nano-particles influence in Molybdenum disulfide waste cooking oil nanofluid for machining of SAE 1144 in surface finish enhancement. Materials Today: Proceedings. ISSN 22147853

Saravanan, R. and Malladi, Avinash and Amuthan, T. and Aneesh, V.N. and Jerin, A. and Anbuchezhiyan, G. and Saikumar, A. (2023) Mechanical characterization of friction stir welded dissimilar aluminium alloy using Taguchi approach. Materials Today: Proceedings. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Baskaran, P. and Vignesh, M. and Aneesh, V.N. and Anbuchezhiyan, G. and Ganesh, M. (2023) Tool wear effects on green and WCO/MoS2 nanofluid clean machining. Materials Today: Proceedings. ISSN 22147853

Karthikeyan, P. and Prabhu, L. and Bhuvaneswari, B. and Yokesvaran, K. and Jerin, A. and Saravanan, R. and Raghuvaran, S. and Negash, Kassu and Sharma, Shubham and Barik, Debabrata (2023) Influences of Various Thermal Cyclic Behaviours on Thermo Adsorption/Mechanical Characteristics of Epoxy Composite Enriched with Basalt Fiber. Adsorption Science & Technology, 2023. ISSN 0263-6174

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Palani, Kumaran and Mamidi, Vamsi Krishna and Thanigaivelan, R. (2022) Influence of Coated Electrode in Nanopowder Mixed EDM of Al–Zn–Mg–Si3N4 Composite. Advances in Materials Science and Engineering, 2022. pp. 1-11. ISSN 1687-8434

Saravanan, R. and Somanathan, T. (2022) Development and Validation of Novel RP-HPLC Method for Determination of Assay and Related Substances of Flucytosine in Drug Product. Asian Journal of Chemistry, 34 (10). pp. 2671-2674. ISSN 09707077

Malladi, Avinash and Karunakaran, K. and Saravanan, R. and Asres, Yalew and Ares, Alicia E. (2022) Material Behaviour of Three Blade Propeller Using Metal Additive Manufacturing Techniques. Advances in Materials Science and Engineering, 2022. pp. 1-7. ISSN 1687-8434

Rajesh, S. and Saravanan, R. and Sekar, C.B. and Gnanavel, C. and Malladi, Avinash and Nagarathi, D.K. (2022) Comparing green Machining and clean technology based Machining for tool wear reduction in Machining SAE 1045 steel. Materials Today: Proceedings, 62. pp. 1308-1313. ISSN 22147853

Rajesh, S. and Saravanan, R. and Kamatchi, T. and Gnanavel, C. and Ajith Arul Daniel, S. and Nagarathi, D.K. (2022) Evaluation on hardness and percentage of elongation discrepancy by Zinc oxide nanoparticles on AA6070 alloy composites. Materials Today: Proceedings, 62. pp. 1921-1924. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Ananda Kumar, Eriki and Arunkumar, K. (2022) Experimental analysis on Feed force reduction performance by nano fluid of nano- alumina particles enriched waste coconut oil in wet machining of SAE 1045 steel shaft. Materials Today: Proceedings, 64. pp. 793-798. ISSN 22147853

Saravanan, R. and Anbuchezhiyan, G. and Pugazhenthi, R. and Sura, Sreekanth (2022) Experimental investigation on tool wear reduction by nano- alumina particles enriched waste coconut oil nano-fluid for machining SAE 1045 shaft. Materials Today: Proceedings, 64. pp. 781-786. ISSN 22147853

Karunakaran, K. and Pugazhenthi, R. and Anbuchezhiyan, G. and Saravanan, R. and Venkateswar Reddy, M (2022) Experimental investigations on synthesis and characterization of tamarind seed powder reinforced Bio- composites. Materials Today: Proceedings, 64. pp. 760-764. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Karunakaran, K. and Venkateswar Reddy, M. (2022) Experimentally investigating cutting force reduction performance by nano-alumina particles enriched waste coconut oil Nano fluid in electric motor shaft manufacturing. Materials Today: Proceedings, 64. pp. 765-770. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Malladi, Avinash and Sekar, C.B. and Rajesh, S. and Nagarathi, D.K. (2022) Feed force based optimization of process parameters by bio-nanofluid for machining SAE 1045 steel. Materials Today: Proceedings, 62. pp. 1319-1324. ISSN 22147853

Baskaran, P. and Saravanan, R. and Vignesh, M. and Prasanna, N. and Gnanavel, C. and Nagarathi, D.K. and Gopalakrishnan, T. (2022) Influence of molybdenum disulfide particles’ concentration on waste cooking oil nano fluid coolant in cutting force reduction on machining SAE 1144 steel. Materials Today: Proceedings, 62. pp. 1969-1972. ISSN 22147853

Saravanan, R. and Rajesh, S. and Gnanavel, C. and Malladi, Avinash and Sekar, C.B. and Nagarathi, D.K. (2022) Reconnoitering the influence of Nano fluid of Nano boracic acid particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish. Materials Today: Proceedings, 62. pp. 1330-1335. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Rathinam, V. and Nagireddy, Madhavi (2022) Reconnoitering the influence of nanofluid of Nano- alumina particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish. Materials Today: Proceedings, 64. pp. 661-666. ISSN 22147853

Saravanan, R. and Gnanavel, C. and Rajesh, S. and Kamatchi, T. and Ajith Arul Daniel, S. and Nagarathi, D.K. (2022) Synthesis of Zinc oxide and CNT in AA7178 aluminium alloy composite impression on characteristics. Materials Today: Proceedings, 62. pp. 1973-1976. ISSN 22147853

Malladi, Avinash and Saravanan, R. and Gnanavel, C. and Rajesh, S. and Sekar, C.B. and Nagarathi, D.K. (2022) Taguchi based parameter optimization for cutting force reduction in SAE 1045 steel machining with nanofluid. Materials Today: Proceedings, 62. pp. 1325-1329. ISSN 22147853

Sreeram, D. and Pugazhenthi, R. and Anbuchezhiyan, G. and Saravanan, R. and Veeranjaneyulu, K. (2022) An investigation of the effects of hot rolling on the microstructure and mechanical behavior of nano-sized SiC particulates reinforced Al6063 alloy composites. Materials Today: Proceedings, 64. pp. 731-736. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Gopalakrishnan, T. and Pugazhenthi, R. (2021) Fracture toughness reinforcement by CNT on G/E/C hybrid composite. Materials Today: Proceedings, 37. pp. 1046-1050. ISSN 22147853

Saravanan, R. and Karuppasamy, M. and Chandrasekaran, M. and Muthuraman, V. (2021) Heat Transfer Effect of CNT and Ethylene Glycol Based Nano-Fluid in Twisted Tape Heat Exchanger with Balls. International Journal of Vehicle Structures and Systems, 12 (4). ISSN 0975-3060

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2021) Investigation of appropriateness of coated steel piston for aluminium alloy piston for small engines. International Journal of Ambient Energy, 41 (11). pp. 1293-1298. ISSN 0143-0750

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2021) CFD analysis of solar still with PCM. Materials Today: Proceedings, 37. pp. 694-700. ISSN 22147853

Gopala Krishnan, T. and Lokesharun, D. and Saravanan, R. and Poornachandiran, N. (2021) CFD based shape optimization of axisymmetric cavitators in supercavitating flows. CFD Based Shape Optimization of Axisymmetric Cavitators in Supercavitating Flows. 020115.

Premkumar, I. J. Isaac and Basker, Sanjeevi and Saravanan, R. and Vijayan, V. and Parthiban, A. and Sathish, T. (2021) Dwindling setup time through a low-cost mechanization – A case study. Dwindling Setup Time through a Low-Cost Mechanization – A Case Study. 020068.

Parthiban, A. and Vijayan, V. and Saravanan, R. and Sathish, T. and Premkumar, I. J. Isaac and Basker, Sanjeevi (2021) Experimental investigation glass/sodium oxidanide treated banana fiber hybrid. Experimental Investigation Glass/ sodium oxidanide Treated Banana Fiber Hybrid. 020064.

Basker, Sanjeevi and Parthiban, A. and Saravanan, R. and Vijayan, V. and Sathish, T. and Premkumar, I. J. Isaac (2021) Influence of chemical treatment in synthesize and characterization sisal/glass hybrid composite. Influence of Chemical Treatment in Synthesize and Characterization Sisal/Glass Hybrid Composite. 020065.

Vijayan, V. and Sathish, T. and Saravanan, R. and Premkumar, I. J. Isaac and Basker, Sanjeevi and Parthiban, A. (2021) Synthesize and characterizations of glass/treated selective sisal fiber hybrid composite. Synthesize and Characterizations of Glass / Treated selective Sisal Fiber Hybrid Composite. 020066.

Sathish, T. and Premkumar, I. J. Isaac and Saravanan, R. and Basker, Sanjeevi and Parthiban, A. and Vijayan, V. (2021) Multiply of process speed, quality and safety through low-cost automation – A case study. Multiply ofProcess Speed, Quality and Safety through Low- Cost Automation –A Case Study. 020067.

Vinod Kumar, T. and Chandrasekaran, M. and Padmanabhan, S. and Saravanan, R. and Arunkumar, S. (2021) Material and design parameters optimization to enhance the life of Anti-Roll bar of commercial truck. Materials Today: Proceedings, 37. pp. 1359-1366. ISSN 22147853

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) CFD Analysis of Twisted Tape Heat Exchanger with Twist Ratio of 3 in Metallic and Ceramic Nano Fluids. International Journal of Vehicle Structures and Systems, 12 (3). ISSN 0975-3060

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Heat Transfer Amplification through Special Tube Inserts and Metallic Nanofluids in Heat Exchanger. International Journal of Vehicle Structures and Systems, 11 (4). ISSN 0975-3060

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and Spiral Spring insert in Double Tube Heat Exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 857-861. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and circular fin insert in double tube heat exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 934-939. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer enhancement through nano-fluids and twisted tape insert with rectangular cut on its rib in a double pipe heat exchanger. Materials Today: Proceedings, 21. pp. 865-869. ISSN 22147853

Vinod Kumar, T. and Chandrasekara, M. and Padmanabhan, S. and Saravanan, R. and Arunkumar, S. (2020) Influence of cooling design in hot press forming on product quality and productivity– An authentic story. Materials Today: Proceedings, 37. pp. 1349-1355. ISSN 22147853

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Numerical exploration of heat transfer in a heat exchanger tube with cone shape inserts and Al2O3 and CuO nanofluids. Materials Today: Proceedings, 21. pp. 940-947. ISSN 22147853

Saravanan, R. and Gnanavel, C. (2020) SPM is a right choice for improving quality and reliability and reduction of cost and manufacturing time – A case study. Materials Today: Proceedings, 21. pp. 993-999. ISSN 22147853

Roy, Badal Dev and Saravanan, R. and Chandrasekaran, M. (2019) Dynamic Load Test Based Data-Logger Turbo matching of B60J67 A58N70 and A58N75 Turbochargers for Tata 497 TCIC-BS III Engine - An Investigation. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2019) Intensification of Heat Transfer in a Double Tube Heat Exchanger with Nano-Fluids and Trapezoidal Cut Twisted Tape - A Numerical Study. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Saravanan, R. and Gopalakrishnan, T. (2019) Numerical Investigation and Optimization of Shape and Design Parameters of Lift Rod of Helicopter. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Chandrasekaran, M. and Roy, Badal Dev and Saravanan, R. (2019) Challenges in Turbomatching - An Ample Review. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Gopalakrishnan, T. and Saravanan, R. and Karunakaran, K. (2019) Numerical Investigation of Toggle Assembly of Landing Gears in Aircraft: Technical note. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Saravanan, R. and Gnanavel, C. (2019) Synthesis and characterization of treated banana fibers and selected jute fiber based hybrid composites. Materials Today: Proceedings, 21. pp. 988-992. ISSN 22147853

Sathish, T. and Jayaprakash, J. and Senthil, P.V. and Saravanan, R. (2017) Multi period disassembly-to-order of end of life product based on scheduling to maximize the profit in reverse logistic operation. FME Transactions, 45 (1). pp. 172-180. ISSN 1451-2092

Saravanan, R. and Pugazhenthi, R. and Gopalakrishnan, T. (2015) Experimental Investigation of EN-31 Steel Surface Grinding Performance with Al<SUB>2</SUB>O<SUB>3</SUB> and CuO Nano Fluids. Journal of Advanced Microscopy Research, 10 (4). pp. 284-291. ISSN 21567573

Saravanan, R. and Santhanam, M. and Nadarajan, S. and Pugazhenthi, R. (2015) Mechanical and Surface Morphological Investigation on Duplex Ageing Behaviour of Al (7075) Al–Zn–Mg–Cu Alloy. Journal of Advanced Microscopy Research, 10 (4). pp. 296-302. ISSN 21567573

Conference or Workshop Item

Gopalakrishnan, T. and Saravanan, R. and Daniel, S. Ajith Arul (2021) Synthesize and characterization of fly ash based nanocomposites. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.