Items where Author is "Chandrasekaran, M"

Jesumanen, J and Chandrasekaran, M and Aurtherson, P. Babu (2024) Influence of rice husk ash Si3N4 ceramic on mechanical, wear and low cycle fatigue behavior of hybrid pineapple/basalt fiber reinforced polyester composite. Biomass Conversion and Biorefinery. ISSN 2190-6815

Sonawane, Pavankumar Ravindra and Chandrasekaran, M (2021) Investigation of gear pitting defect using vibration characteristics in a single-stage gearbox. The International Journal of Electrical Engineering & Education, 57 (3). pp. 272-278. ISSN 0020-7209

Vinod Kumar, T and Chandrasekaran, M and Mohanraj, P and Balasubramanian, Ravishankar and Muraliraja, R and S. Shaisundaram, V (2018) Fillers preparation for polymer composite and its properties – a review. International Journal of Engineering & Technology, 7 (3.3). p. 212. ISSN 2227-524X

Parthiban, A and Sathish, S and Chandrasekaran, M (2017) Optimization of Abrasive Water Jet Cutting Parameter for AISI 316L Stainless Steel Sheet. Journal of Applied Fluid Mechanics, 10 (SI). ISSN 17353572

Karunakaran, K and Chandrasekaran, M (2017) Experimental Investigation Nano Particles Influence in NPMEDM to Machine Inconel 800 with Electrolyte Copper Electrode. IOP Conference Series: Materials Science and Engineering, 197. 012068. ISSN 1757-8981

Sathish, S and Parthiban, A and Vinod kumar, T and Chandrasekaran, M (2017) Analysis of Biomethanation Process from market waste to generate bio energy. IOP Conference Series: Materials Science and Engineering, 183. 012031. ISSN 1757-8981

Gnanavel, C and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Case Study of Cycle Time Reduction by Mechanization in Manufacturing Environment. IOP Conference Series: Materials Science and Engineering, 183. 012023. ISSN 1757-8981

Vinod Kumar, T and Chandrasekaran, M and Santhanam, V and Udayakumar, N (2017) Characterization of Nylon 6 Nano Fiber/E-Glass Fiber Reinforced Epoxy Composites. IOP Conference Series: Materials Science and Engineering, 183. 012002. ISSN 1757-8981

Pugazhenthi, R and Chandrasekaran, M and Muthuraman, R K and Vivek, P and Parthiban, A (2017) A Comparative Characteristic Study of Jatropha and Cardanol Biodiesel Blends. IOP Conference Series: Materials Science and Engineering, 183. 012038. ISSN 1757-8981

Vivek, P and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Critical Machine Based Scheduling -A Review. IOP Conference Series: Materials Science and Engineering, 183. 012027. ISSN 1757-8981

Vinod Kumar, T and Chandrasekaran, M and Santhanam, V and Sudharsan, V D (2017) Effect of Coupling Agent on Mechanical Properties of Palm Petiole Nanofiber Reinforced Composite. IOP Conference Series: Materials Science and Engineering, 183. 012006. ISSN 1757-8981

Vivek, P and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Heuristic for Critical Machine Based a Lot Streaming for Two-Stage Hybrid Production Environment. IOP Conference Series: Materials Science and Engineering, 183. 012030. ISSN 1757-8981

Sivaganesan, S and Chandrasekaran, M and Ruban, M (2017) Impact of Various Compression Ratio on the Compression Ignition Engine with Diesel and Jatropha Biodiesel. IOP Conference Series: Materials Science and Engineering, 183. 012039. ISSN 1757-8981

Gnanavel, C and Saravanan, R and Chandrasekaran, M and Jayakanth, J J (2017) Improvement of Productivity in TIG Welding Plant by Equipment Design in Orbit. IOP Conference Series: Materials Science and Engineering, 183. 012020. ISSN 1757-8981

Jayakanth, J J and Ramasubramanian, S and Chandrasekaran, M and Manavalan, S (2017) Investigation of solar water heater by using flat plate collector and evacuated tubes. IOP Conference Series: Materials Science and Engineering, 183. 012035. ISSN 1757-8981

Padmanabhan, S and Chandrasekaran, M and Ganesan, S and Khan patan, Mahamed Naveed and Navakanth, Polina (2017) Optimal Solution for an Engineering Applications Using Modified Artificial Immune System. IOP Conference Series: Materials Science and Engineering, 183. 012025. ISSN 1757-8981

Parthiban, A and Sathish, S and Chandrasekaran, M and Ravikumar, R (2017) Optimization of CO 2 laser cutting parameters on Austenitic type Stainless steel sheet. IOP Conference Series: Materials Science and Engineering, 183. 012022. ISSN 1757-8981

Sridhar, R and Chandrasekaran, M and Sriramya, C and Page, Tom (2017) Optimization of heterogeneous Bin packing using adaptive genetic algorithm. IOP Conference Series: Materials Science and Engineering, 183. 012026. ISSN 1757-8981

Gnanavel, C and Saravanan, R and Chandrasekaran, M and Pugazhenthi, R (2017) Restructured review on Electrical Discharge Machining - A state of the art. IOP Conference Series: Materials Science and Engineering, 183. 012015. ISSN 1757-8981

Gopal, P and Bupesh Raja, V K and Chandrasekaran, M and Dhanasekaran, C (2017) Woven Hybrid Composites - Tensile and Flexural Properties of Jute Mat Fibres with Epoxy Composites. IOP Conference Series: Materials Science and Engineering, 183. 012001. ISSN 1757-8981

Vinod Kumar, T. and Chandrasekaran, M and Santhanam2, V. CHARACTERISTICS ANALYSIS OF COCONUT SHELL HUSK REINFORCED POLYMER COMPOSITES. CHARACTERISTICS ANALYSIS OF COCONUT SHELL HUSK REINFORCED POLYMER COMPOSITES.

Parthiban, A and Chandrasekaran, M and Sathish2, S and Vinod Kumar1, T COMPREHENSIVE ANALYSIS OF MILLING PARAMETERS ON ALUMINIUM ALLOYS. COMPREHENSIVE ANALYSIS OF MILLING PARAMETERS ON ALUMINIUM ALLOYS.

Parthiban, Alagesan and Sathish, Saravanan and Chandrasekaran, M Fuzzy logic based modeling of CO2 laser cutting for stainless steel sheet. Fuzzy logic based modeling of CO2 laser cutting for stainless steel sheet.

Karunakaran, K and Chandrasekaran, M MACHINEABILITY STUDY ON DIE SINKING EDM OF INCONEL 800 WITH ELECTROLYTE COPPER ELECTRODE. MACHINEABILITY STUDY ON DIE SINKING EDM OF INCONEL 800 WITH ELECTROLYTE COPPER ELECTRODE.

Pugazhenthi, Rajagopal and Saravanan, R and Chandrasekaran, M and Franklin Issac, R. Optimization of wheel axle plant manufacturing environment by simulation. Optimization of wheel axle plant manufacturing environment by simulation.

Padmanabhan, S and Rajasekar, S and Ganesan, S and Saravanan, S and Chandrasekaran, M PERFORMANCE AND EMISSION ANALYSIS ON CI ENGINE USING SOAPNUT OIL AS BIOFUEL. PERFORMANCE AND EMISSION ANALYSIS ON CI ENGINE USING SOAPNUT OIL AS BIOFUEL.