Items where Author is "Chandrasekaran, M."

[up] Up a level
Group by: Item Type | No Grouping
Number of items: 95.

Gopalakrishnan, T. and Venkatesan, Raja and Chandrasekaran, M. and Deepa, Simon and Kim, Seong-Cheol (2024) Advances in implant for surface modification to enhance the interfacial bonding of shape memory alloy wires in composite resins. Progress in Organic Coatings, 188. p. 108242. ISSN 03009440

Jesumanen, J. and Chandrasekaran, M. and Aurtherson, P. Babu (2023) Mechanical, wear, and low cycle fatigue behaviour of rice husk ash Si3N4 and pineapple/basalt Fiber–reinforced polyester composite. Biomass Conversion and Biorefinery. ISSN 2190-6815

Ramya, G. and Chandrasekaran, M. and Arulmozhi, P. (2022) Optimization of production cost for integrating job shop scheduling with production resources. Materials Today: Proceedings, 37. pp. 1839-1844. ISSN 22147853

Muraliraja, R. and Pradeepkumar, K. and Mohanraj, P. and Vinod Kumar, T. and Dhanasekaran, C. and Chandrasekaran, M. and Ragavanantham, S. and Shaisundaram, V. S. (2022) The Effects of Electroless Ni-P Coated SiC on the Properties of Magnesium Composite. Materials Performance and Characterization, 11 (1). p. 20210089. ISSN 23791365

Chandrasekaran, M. and Santhanam, V. and Venkateshwaran, N. (2022) Impeller design and CFD analysis of fluid flow in rotodynamic pumps. Materials Today: Proceedings, 37. pp. 2153-2157. ISSN 22147853

Shaisundaram, V.S. and Chandrasekaran, M. and Sujith, S. and Praveen Kumar, K.J. and Shanmugam, Mohanraj (2022) Design and analysis of novel biomass stove. Materials Today: Proceedings, 46. pp. 4054-4058. ISSN 22147853

Shaisundaram, V. S. and Saravanakumar, S. and Balambica, V. and Sendil Kumar, D. and Chandrasekaran, M. and Muraliraja, R. and Muniappan, A. and Asres, Yalew and Vijayan, V. (2022) Effects of Thermal Barrier Coating Using Various Dosing Levels of Aluminium Oxide Nanoadditive Fuel on Diesel in Compressed Ignition Engine. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Shaisundaram, V. S. and Balambica, V. and Sendil Kumar, D. and Nithish, S. and Chandrasekaran, M. and Shanmugam, Mohanraj and Likassa, Dabala Misgana and B, Deepanraj (2022) Optimization of Dual Coating Using Electroless Ni‐P‐Nano‐TiO 2 and Plasma Yttria‐Stabilized Zirconia on Piston Crown and Cylinder Liner in CI Engine. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Shaisundaram, V. S. and Chandrasekaran, M. and Hariharan, C. and Shanmugam, Mohanraj and Sujith, S. and Praveen Kumar, K. J. (2022) Automatic Flame Suppression System for Four Wheeler Passenger Vehicles. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 625-630.

Santhanam, V. and Sendhilkumar, S. and Venkateshwaran, N. and Chandrasekaran, M. (2022) The Effect of Drilling Parameters on the Hole Quality of Hybrid Fiber-Reinforced Epoxy Composite. In: The Effect of Drilling Parameters on the Hole Quality of Hybrid Fiber-Reinforced Epoxy Composite. Springer, pp. 99-110.

Ananda Kumar, Eriki and Pugazhenhi, R. and Chandrasekaran, M. and Anbuchezhiyan, G. (2022) Effect of preheating on machinability of titanium alloy. Materials Today: Proceedings, 64. pp. 799-803. ISSN 22147853

Chandrasekaran, M. and Sonawane, Pavankumar R. and Sriramya, P. (2022) Prediction of Gear Pitting Severity by Using Naive Bayes Machine Learning Algorithm. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 131-141.

Abhishek Krishna Sai, A. and Chandrasekaran, M. and Vinod Kumar, T. and Pugazhenthi, R. (2022) Study the enhanced mechanical properties of Al/B4C metal matrix composite. Materials Today: Proceedings, 68. pp. 1422-1428. ISSN 22147853

Ramasubramanian, S. and Chandrasekaran, M. and Baskar, S. and Dowhithamaran, A. and Ravin, L (2021) Design and development of pneumatic compressed air vehicle. Materials Today: Proceedings, 37. pp. 690-693. ISSN 22147853

Jayakanth, J.J. and Chandrasekaran, M. and Pugazhenthi, R. (2021) Impulse excitation analysis of material defects in ball bearing. Materials Today: Proceedings, 39. pp. 717-724. ISSN 22147853

Saravanan, R. and Karuppasamy, M. and Chandrasekaran, M. and Muthuraman, V. (2021) Heat Transfer Effect of CNT and Ethylene Glycol Based Nano-Fluid in Twisted Tape Heat Exchanger with Balls. International Journal of Vehicle Structures and Systems, 12 (4). ISSN 0975-3060

Shaisundaram, V.S. and Chandrasekaran, M. and Muraliraja, R. and Shanmugam, Mohanraj and Baskar, S. and Bhuvendran, Arun (2021) Investigation of Tamarind Seed Oil biodiesel with aluminium oxide nanoparticle in CI engine. Materials Today: Proceedings, 37. pp. 1417-1421. ISSN 22147853

Shaisundaram, V.S. and Chandrasekaran, M. and Shanmugam, Mohanraj and Padmanabhan, S. and Muraliraja, R. and Karikalan, L. (2021) Investigation of Momordica charantia seed biodiesel with cerium oxide nanoparticle on CI engine. International Journal of Ambient Energy, 42 (14). pp. 1615-1619. ISSN 0143-0750

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2021) Investigation of appropriateness of coated steel piston for aluminium alloy piston for small engines. International Journal of Ambient Energy, 41 (11). pp. 1293-1298. ISSN 0143-0750

Padmanabhan, S. and Vinod Kumar, T. and Chandrasekaran, M. and Ganesan, S. (2021) Investigation of Sapindus seed biodiesel with nano additive on single cylinder diesel engine. International Journal of Ambient Energy, 41 (10). pp. 1106-1109. ISSN 0143-0750

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2021) CFD analysis of solar still with PCM. Materials Today: Proceedings, 37. pp. 694-700. ISSN 22147853

Ananda, K. Eriki and Pugazhenthi, R. and Chandrasekaran, M. (2021) Comparison in surface roughness of Ti6Al4v using CBN & bondless tool with the operations of turning and grinding. Comparison in surface roughness of Ti6Al4v using CBN & bondless tool with the operations of turning and grinding. 020110.

Karikalan, L. and Chandrasekaran, M. and Venugopal, S. and Jacob, S. and Baskar, S. (2021) Investigations on diesel engine characteristics with Pongamia biodiesel at dissimilar compression ratios. International Journal of Ambient Energy, 42 (9). pp. 1005-1008. ISSN 0143-0750

Jeya Jeevahan, J. and Chandrasekaran, M. and Venkatesan, S.P. and Sriram, V. and Britto Joseph, G. and Mageshwaran, G. and Durairaj, R.B. (2021) Scaling up difficulties and commercial aspects of edible films for food packaging: A review. Trends in Food Science & Technology, 100. pp. 210-222. ISSN 09242244

Vairavel, M. and Chandrasekaran, M. and Vivek, P. and Vinod Kumar, T. (2021) Empirical performance analysis of VCR engine fuelled with karanja oil and various additives using ANOVA technique. International Journal of Ambient Energy, 41 (4). pp. 369-373. ISSN 0143-0750

Ramasubramanian, S. and Chandrasekaran, M. (2021) A statistical analysis on tar reduction in producer gas for IC engine application. International Journal of Ambient Energy, 42 (2). pp. 156-162. ISSN 0143-0750

Sridhar, R. and Jeevahan, Jeya and Chandrasekaran, M. (2021) Effect of the addition of 1-pentanol on engine performance and emission characteristics of diesel and biodiesel fuelled single cylinder diesel engine. International Journal of Ambient Energy, 41 (1). pp. 58-63. ISSN 0143-0750

Thendral Selvam, P. and Pugazhenthi, R. and Dhanasekaran, C. and Chandrasekaran, M. and Sivaganesan, S. (2021) Experimental Investigation on the Frictional Wear Behaviour of TiAlN Coated Brake Pads. Materials Today: Proceedings, 37. pp. 2419-2426. ISSN 22147853

Shaisundaram, V.S. and Chandrasekaran, M. (2021) Investigation of watermelon seed oil biodiesel with Cerium oxide nanoparticle in CI engine. Materials Today: Proceedings, 44. pp. 3633-3637. ISSN 22147853

Malligarjunan, S. and Chandrasekaran, M. and Bhaskar, G.B. (2021) Investigation on the effect of support structure space in determining optimal part orientation using a generic algorithm. International Journal of Manufacturing Technology and Management, 35 (6). p. 527. ISSN 1368-2148

Vinod Kumar, T. and Chandrasekaran, M. and Padmanabhan, S. and Saravanan, R. and Arunkumar, S. (2021) Material and design parameters optimization to enhance the life of Anti-Roll bar of commercial truck. Materials Today: Proceedings, 37. pp. 1359-1366. ISSN 22147853

Karikalan, L. and Sukenraj, K. and Chandrasekaran, M. (2021) Performance and pollutant analysis of diesel engine with cashew shell oil as bio-material. Materials Today: Proceedings, 37. pp. 685-689. ISSN 22147853

Karikalan, L. and Chandrasekaran, M. and Baskar, S. (2021) Studies on CI engine characteristics with waste cooking oil as biomaterial. Materials Today: Proceedings, 37. pp. 565-567. ISSN 22147853

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V. and Vinod Kumar, T. (2021) Study properties and mechanical behavior of the shaft material 16MnCr5. Materials Today: Proceedings, 37. pp. 2458-2461. ISSN 22147853

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) CFD Analysis of Twisted Tape Heat Exchanger with Twist Ratio of 3 in Metallic and Ceramic Nano Fluids. International Journal of Vehicle Structures and Systems, 12 (3). ISSN 0975-3060

Ramasubramanian, S. and Chandrasekaran, M. (2020) Optimisation of catalytic system for tar mitigation in biomass producer gas. International Journal of Ambient Energy, 41 (6). pp. 621-626. ISSN 0143-0750

Arul Peter, A. and Chandrasekaran, M. and Prakash, P. and Kumar, T. Vinod and Vivek, P. (2020) Experimental investigation of a spark ignition engine using blends of biogas. International Journal of Ambient Energy, 41 (4). pp. 462-465. ISSN 0143-0750

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Karikalan, L. (2020) Experimental studies on convective heat transfer coefficient of water/ethylene glycol-carbon nanotube nanofluids. International Journal of Ambient Energy, 41 (3). pp. 296-299. ISSN 0143-0750

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Ramasubramanian, S. (2020) Experimental studies on flow and heat transfer characteristics of secondary refrigerant-based CNT nanofluids for cooling applications. International Journal of Ambient Energy, 41 (3). pp. 285-288. ISSN 0143-0750

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Heat Transfer Amplification through Special Tube Inserts and Metallic Nanofluids in Heat Exchanger. International Journal of Vehicle Structures and Systems, 11 (4). ISSN 0975-3060

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. (2020) Investigation on the effect of thermal barrier coating at different dosing levels of cerium oxide nanoparticle fuel on diesel in a CI engine. International Journal of Ambient Energy, 41 (1). pp. 98-104. ISSN 0143-0750

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and Spiral Spring insert in Double Tube Heat Exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 857-861. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and circular fin insert in double tube heat exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 934-939. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer enhancement through nano-fluids and twisted tape insert with rectangular cut on its rib in a double pipe heat exchanger. Materials Today: Proceedings, 21. pp. 865-869. ISSN 22147853

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Numerical exploration of heat transfer in a heat exchanger tube with cone shape inserts and Al2O3 and CuO nanofluids. Materials Today: Proceedings, 21. pp. 940-947. ISSN 22147853

Chandrasekaran, M. and Rama Subramanian, S. (2019) A Catalytic Tar Reduction Methodology Gaseous Fuels. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Roy, Badal Dev and Saravanan, R. and Chandrasekaran, M. (2019) Dynamic Load Test Based Data-Logger Turbo matching of B60J67 A58N70 and A58N75 Turbochargers for Tata 497 TCIC-BS III Engine - An Investigation. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Vinodkumar, T. and Chandrasekaran, M. and Vivek, P. and Arunkumar, S. and Padmanabhan, S. (2019) Evaluating the Mechanical Properties of Snake Grass Fibre and Sisal Fibre Hybrid Composites by Injection Moulding Method. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Shaisundaram, V.S. and Karikalan, L. and Chandrasekaran, M. (2019) Experimental Investigation on the Effect of Cerium Oxide Nanoparticle Fuel Additives on Pumpkin Seed Oil in CI Engine. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2019) Intensification of Heat Transfer in a Double Tube Heat Exchanger with Nano-Fluids and Trapezoidal Cut Twisted Tape - A Numerical Study. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Karikalan, L. and Chandrasekaran, M. and Ramasubramanian, S. and Vivek, P. (2019) Influence of modified pent roof combustion cavity on diesel engine performance and emission characteristics. International Journal of Ambient Energy, 40 (8). pp. 827-831. ISSN 0143-0750

Jeevahan, Jeya and Chandrasekaran, M. (2019) Nanoedible films for food packaging: a review. Journal of Materials Science, 54 (19). pp. 12290-12318. ISSN 0022-2461

Karikalan, L. and Chandrasekaran, M. and Vinod Kumar, T. and Sridhar, R. (2019) Behaviour of CI engine performance, combustion and exhaust emission with neem biodiesel at varied fuel injection rates. International Journal of Ambient Energy, 40 (7). pp. 749-753. ISSN 0143-0750

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. and Vinodkumar, T. (2019) Control of carbon dioxide emission in automobile vehicles using CO 2 scrubber. International Journal of Ambient Energy, 40 (7). pp. 699-703. ISSN 0143-0750

Chandrasekaran, M. and Roy, Badal Dev and Saravanan, R. (2019) Challenges in Turbomatching - An Ample Review. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Vinod Kumar, T. and Chandrasekaran, M. and Vivek, P. and Arunkumar, S. and Padmanabhan, S. (2019) Mechanical Characterization of Roselle and Sisal Fibre Reinforced Polymer Composites. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Jeevahan, Jeya and Chandrasekaran, M. and Britto Joseph, G. and Poovannan, A. and Sriram, V. (2019) Experimental investigation of the influence of isobutanol addition on engine performance and emissions of a direct ignition diesel engine fuelled by biodiesel blends derived from waste vegetable oil. International Journal of Ambient Energy, 40 (2). pp. 187-194. ISSN 0143-0750

Muraliraja, R. and Sudagar, J. and Elansezhian, R. and Raviprakash, A. V. and Dhinakaran, R. and Shaisundaram, V. S. and Chandrasekaran, M. (2019) Estimation of Zwitterionic Surfactant Response in Electroless Composite Coating and Properties of Ni–P–CuO (Nano)Coating. Arabian Journal for Science and Engineering, 44 (2). pp. 821-828. ISSN 2193-567X

Sathish, S. and Chandrasekaran, M. and Solomon, Gnanadurai Ravikumar (2019) Effect of total solids and agitation time on biogas yield, using rice husk. International Journal of Ambient Energy, 40 (1). pp. 101-104. ISSN 0143-0750

Ramya, G. and Chandrasekaran, M. and Shankar, E. (2019) Case Study Analysis of Job Shop Scheduling and its Integration with Material Requirement Planning. Materials Today: Proceedings, 16. pp. 1034-1042. ISSN 22147853

Jeevahan, Jeya and Chandrasekaran, M. and Sethu, Akshay (2019) Influence of nanocellulose addition on the film properties of the bionanocomposite edible films prepared from maize, rice, wheat, and potato starches. In: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS: ICAM 2019, 12–14 June 2019, Kerala, India.

Sathish, S. and Chandrasekaran, M. and Parthiban, A. (2018) Effect of co-digestion agricultural-industrial residues: various slurry temperatures. International Journal of Ambient Energy, 39 (7). pp. 694-697. ISSN 0143-0750

Sivaganesan, S. and Chandrasekaran, M. and Ramasubramanian, S. and Gnanavel, C. (2018) The influence of bio additive on the compression ignition engine with diesel and Jatropha methyl ester biodiesel. International Journal of Ambient Energy, 39 (4). pp. 377-381. ISSN 0143-0750

Jeevahan, Jeya and Chandrasekaran, M. and Britto Joseph, G. and Durairaj, R. B. and Mageshwaran, G. (2018) Superhydrophobic surfaces: a review on fundamentals, applications, and challenges. Journal of Coatings Technology and Research, 15 (2). pp. 231-250. ISSN 1547-0091

Jeevahan, Jeya and Chandrasekaran, M. (2018) Effect of Olive oil Concentrations on film properties of edible composite films prepared from Corn starch and Olive oil. Research Journal of Pharmacy and Technology, 11 (11). p. 4934. ISSN 0974-3618

Parthiban, A. and Chandrasekaran, M. and Muthuraman, V. and Sathish, S. (2018) Optimization of CO2 Laser Cutting of Stainless Steel Sheet for Curved Profile. Materials Today: Proceedings, 5 (6). pp. 14531-14538. ISSN 22147853

Ramasubramanian, S. and Chandrasekaran, M. and Sridhar, R. and Karunakaran, K. (2017) Design, Manufacture and Analysis of Al/SiC MMCs for Connecting Rod. IOP Conference Series: Materials Science and Engineering, 183. 012009. ISSN 1757-8981

Karunakaran, K. and Chandrasekaran, M. (2017) Investigation of Machine-ability of Inconel 800 in EDM with Coated Electrode. IOP Conference Series: Materials Science and Engineering, 183. 012014. ISSN 1757-8981

Karikalan, L. and Chandrasekaran, M. (2017) Performance and pollutants analysis on diesel engine using blends of Jatropha Biodiesel and Mineral Turpentine as fuel. International Journal of Environmental Science and Technology, 14 (2). pp. 323-330. ISSN 1735-1472

Karunakaran, K. and Chandrasekaran, M. and Yuan, H.L. and Agarwal, R.K. and Tandon, P. and Wang, E.X. (2017) Influence of Process Parameters in n-PMEDM of Inconel 800 with Electrode and Coated Electrodes. MATEC Web of Conferences, 95. 02002. ISSN 2261-236X

Karunakaran, K. and Chandrasekaran, M. (2016) Experimental Investigation of process parameters influence on machining Inconel 800 in the Electrical Spark Eroding Machine. IOP Conference Series: Materials Science and Engineering, 157. 012007. ISSN 1757-8981

Karikalan, L. and Chandrasekaran, M. (2016) Influence of turpentine addition in Jatropha biodiesel on CI engine performance, combustion and exhaust emissions. International Journal of Automotive Technology, 17 (4). pp. 697-702. ISSN 1229-9138

Sivaganesan, S. and Chandrasekaran, M. (2016) Performance and Emission Analysis of Compression Ignition Engine with Methyl Ester of Jatropha and Diesel. Indian Journal of Science and Technology, 9 (26). ISSN 0974-6846

Vijaya Ramnath, B. and Sharavanan, R. and Chandrasekaran, M. and Elanchezhian, C. and Sathyanarayanan, R. and Niranjan Raja, R. and Junaid Kokan, S. (2015) Experimental determination of mechanical properties of banana jute hybrid composite. Fibers and Polymers, 16 (1). pp. 164-172. ISSN 1229-9197

Udaiyakumar, Kuppuswamy Chockalingam and Chandrasekaran, M. (2015) An approach of a Lampyridae family (firefly) algorithm for optimisation of Bagchi's job shop scheduling problems. International Journal of Enterprise Network Management, 6 (4). p. 324. ISSN 1748-1252

Padmanabhan, S. and Srinivasa Raman, V. and Chandrasekaran, M. (2014) Optimisation of gear reducer using evolutionary algorithm. Materials Research Innovations, 18 (sup6). S6-378-S6-383. ISSN 1432-8917

Shanmugavel, P. and Bhaskar, G. B. and Chandrasekaran, M. (2014) Determination of Stress Intensity Factors and Fatigue Characteristics of Al-SiC Composite Material and Al-SiC Functionally Graded Material by Simulation. International Review of Mechanical Engineering (IREME), 8 (6). p. 1017. ISSN 1970-8734

Santhanam, V. and Chandrasekaran, M. and Venkateshwaran, N. (2014) Effect of Fiber Parameters on the Mechanical Properties of Banana-Glass Fiber Hybrid Composites. Applied Mechanics and Materials, 592-59. pp. 202-205. ISSN 1662-7482

Chandrasekaran, M. and Sriramya, P. and Parvathavarthini, B. and Saravanamanikandan, M. (2014) Computational Complexity Analysis of Selective Breeding Algorithm. Applied Mechanics and Materials, 591. pp. 172-175. ISSN 1662-7482

Santhanam, V. and Chandrasekaran, M. (2014) Effect of Surface Treatment on the Mechanical Properties of Banana-Glass Fibre Hybrid Composites. Applied Mechanics and Materials, 591. pp. 7-10. ISSN 1662-7482

Arulmozhi, P. and Chandrasekaran, M. and Padmanabhan, S. (2014) Multi Objective Optimization for Spur Gear Design Using Sheep Flocks Heredity Model Algorithm. Applied Mechanics and Materials, 591. pp. 68-71. ISSN 1662-7482

Lakshmipathy, D. and Chandrasekaran, M. and Balamurugan, T. and Sriramya, P. (2014) A New GT Heuristic for Solving Multi Objective Job Shop Scheduling Problems. Applied Mechanics and Materials, 591. pp. 184-188. ISSN 1662-7482

Udaiyakumar, K.C. and Chandrasekaran, M. (2014) Optimization of Multi Objective Job Shop Scheduling Problems Using Firefly Algorithm. Applied Mechanics and Materials, 591. pp. 157-162. ISSN 1662-7482

Gobinath, S. and Arumugam, C. and Ramya, G. and Chandrasekaran, M. (2014) Optimization of Total Holding Cost in Job Shop Scheduling by Using Hybrid Algorithm. Applied Mechanics and Materials, 591. pp. 176-179. ISSN 1662-7482

Karthikeyan, S. and Asokan, P. and Chandrasekaran, M. (2014) A Hybrid Discrete Firefly Algorithm for Multi-Objective Flexible Job Shop Scheduling Problems with Maintenance Activity. Applied Mechanics and Materials, 575. pp. 922-925. ISSN 1662-7482

Udaiyakumar, K.C. and Chandrasekaran, M. (2014) Application of Firefly Algorithm in Job Shop Scheduling Problem for Minimization of Makespan. Procedia Engineering, 97. pp. 1798-1807. ISSN 18777058

Ramya, G. and Chandrasekaran, M. (2014) Shuffled frog leaping algorithm approach to employee timetabling and job shop scheduling. International Journal of Internet Manufacturing and Services, 3 (3). p. 178. ISSN 1751-6048

Ramya, G. and Chandrasekaran, M. (2014) Shuffled frog leaping algorithm approach to employee timetabling and job shop scheduling. International Journal of Internet Manufacturing and Services, 3 (3). p. 178. ISSN 1751-6048

Ramya, G. and Chandrasekaran, M. (2013) Solving Job Shop Scheduling Problem Based on Employee Availability Constraint. Applied Mechanics and Materials, 376. pp. 197-206. ISSN 1662-7482

Santhanam, V. and Chandrasekaran, M. and Venkateshwaran, N. and Elayaperumal, A. (2012) Mode I Fracture Toughness of Banana Fiber and Glass Fiber Reinforced Composites. Advanced Materials Research, 622-62. pp. 1320-1324. ISSN 1662-8985

Padmanabhan, S. and Chandrasekaran, M. and Asokan, P. and Raman, V. Srinivasa (2012) A Performance Study of Real Coded Genetic Algorithm on Gear Design Optimization. Advanced Materials Research, 622-62. pp. 64-68. ISSN 1662-8985

Chandrasekaran, M. and Sriramya, P. and Lakshmipathy, D. Application of artificial immune system algorithm to minimize total holding cost of completed and In-Process products subjectwith no tardy jobs. International Journal of Applied Engineering Research.

Karikalan, Loganathan and Chandrasekaran, M. Effect of varying fuel injection pressure of selective vegetable oil biodiesel on C.I engine performance and pollutants. International Journal of ChemTech Research.

Sivaganesan, S. and Chandrasekaran, M. THE INFLUENCE OF THERMAL BARRIER COATING ON THE COMBUSTION AND EXHAUST EMISSION IN TURPENTINE OIL POWERED DI DIESEL ENGINE. ARPN Journal of Engineering and Applied Sciences.

Vinod Kumar, T. and Muraliraja, R. and Chandrasekaran, M. Optimization of process parameters to improve the wear resistance of the mild steel using electroless Ni-P coating process. https://jurnaltribologi.mytribos.org/v31/JT-31-1-12.pdf.

This list was generated on Wed Mar 12 16:50:49 2025 IST.