Items where Author is "Anbuchezhiyan, G."

Article

Selvam, R. and Vignesh, M. and Pugazhenthi, R. and Anbuchezhiyan, G. and Satyanarayana Gupta, M. (2024) Effect of process parameter on wire cut EDM using RSM method. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (5). pp. 2957-2968. ISSN 1955-2513

Rajesh, G. and Thiyagaraj, J. and Jagath Narayana, K. and Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Satyanarayana Gupta, M. (2023) Microstructure and mechanical properties of AZ91D/Si3N4 composites using squeeze casting method. Materials Today: Proceedings. ISSN 22147853

Saravanan, R. and Gnanavel, C. and Ajith Arul Daniel, S. and Rajesh, S. and Kamatchi, T. and Anbuchezhiyan, G. and Sreekanth, S. (2023) Analysis of mechanical properties enhancement on composites of AA7175 by multi walled carbon nano tube (MWCNT). Materials Today: Proceedings. ISSN 22147853

Amuthan, T. and Saravanan, R. and Gnanavel, C. and Manikandan, R. and Jagadeeswaran, P. and Anbuchezhiyan, G. and Ganesh, M. (2023) Cutting zone temperature reduction in by using novel nanofluid in SAE1144 machining. Materials Today: Proceedings. ISSN 22147853

Prajul Raj, P. and Sridhar, R. and Pugazhenthi, R. and Anbuchezhiyan, G. and Ganesh, M. (2023) Investigating the mechanical properties of tungsten carbide metal matrix composites with Al 6061. Materials Today: Proceedings. ISSN 22147853

Gopalakrishnan, T. and Saravanan, R. and Malladi, Avinash and Manikandan, R. and Jagadeeswaran, P. and Anbuchezhiyan, G. and Ganesh, M. (2023) Effects of Molybdenum disulfide nano-particles’ concentration on waste cooking oil nanofluid in reduction feed force in CNC wet machining of SAE 1144 steel. Materials Today: Proceedings. ISSN 22147853

Saravanan, R. and Malladi, Avinash and Gopalakrishnan, T. and Manikandan, R. and Jagadeeswaran, P. and Anbuchezhiyan, G. and Veeranjaneyulu, K. (2023) Investigating concentration of nano-particles influence in Molybdenum disulfide waste cooking oil nanofluid for machining of SAE 1144 in surface finish enhancement. Materials Today: Proceedings. ISSN 22147853

Saravanan, R. and Malladi, Avinash and Amuthan, T. and Aneesh, V.N. and Jerin, A. and Anbuchezhiyan, G. and Saikumar, A. (2023) Mechanical characterization of friction stir welded dissimilar aluminium alloy using Taguchi approach. Materials Today: Proceedings. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Baskaran, P. and Vignesh, M. and Aneesh, V.N. and Anbuchezhiyan, G. and Ganesh, M. (2023) Tool wear effects on green and WCO/MoS2 nanofluid clean machining. Materials Today: Proceedings. ISSN 22147853

Mohan, E. and Anbuchezhiyan, G. and Pugazhenthi, R. and Prakash, F. Peter (2023) Wear Behavior of Brass Based Composite Reinforced with SiC and Produced by Stir Casting Process. Materials Research, 26. ISSN 1516-1439

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Palani, Kumaran and Mamidi, Vamsi Krishna and Thanigaivelan, R. (2022) Influence of Coated Electrode in Nanopowder Mixed EDM of Al–Zn–Mg–Si3N4 Composite. Advances in Materials Science and Engineering, 2022. pp. 1-11. ISSN 1687-8434

Pugazhenthi, R. and Anbuchezhiyan, G. and Muthuraman, R.K. and Vignesh, M. and Ponshanmugakumar, A. (2022) Optimization of fatigue life and fractography analysis of knuckle joint. Materials Today: Proceedings, 46. pp. 4344-4348. ISSN 22147853

Ananda Kumar, Eriki and Pugazhenhi, R. and Chandrasekaran, M. and Anbuchezhiyan, G. (2022) Effect of preheating on machinability of titanium alloy. Materials Today: Proceedings, 64. pp. 799-803. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Ananda Kumar, Eriki and Arunkumar, K. (2022) Experimental analysis on Feed force reduction performance by nano fluid of nano- alumina particles enriched waste coconut oil in wet machining of SAE 1045 steel shaft. Materials Today: Proceedings, 64. pp. 793-798. ISSN 22147853

Saravanan, R. and Anbuchezhiyan, G. and Pugazhenthi, R. and Sura, Sreekanth (2022) Experimental investigation on tool wear reduction by nano- alumina particles enriched waste coconut oil nano-fluid for machining SAE 1045 shaft. Materials Today: Proceedings, 64. pp. 781-786. ISSN 22147853

Karunakaran, K. and Pugazhenthi, R. and Anbuchezhiyan, G. and Saravanan, R. and Venkateswar Reddy, M (2022) Experimental investigations on synthesis and characterization of tamarind seed powder reinforced Bio- composites. Materials Today: Proceedings, 64. pp. 760-764. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Karunakaran, K. and Venkateswar Reddy, M. (2022) Experimentally investigating cutting force reduction performance by nano-alumina particles enriched waste coconut oil Nano fluid in electric motor shaft manufacturing. Materials Today: Proceedings, 64. pp. 765-770. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Rathinam, V. and Nagireddy, Madhavi (2022) Reconnoitering the influence of nanofluid of Nano- alumina particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish. Materials Today: Proceedings, 64. pp. 661-666. ISSN 22147853

Sreeram, D. and Pugazhenthi, R. and Anbuchezhiyan, G. and Saravanan, R. and Veeranjaneyulu, K. (2022) An investigation of the effects of hot rolling on the microstructure and mechanical behavior of nano-sized SiC particulates reinforced Al6063 alloy composites. Materials Today: Proceedings, 64. pp. 731-736. ISSN 22147853

Pugazhenthi, R. and Sreeram, D. and Scaria, Clement Tom and Anbuchezhiyan, G. and Nanthakumar, P. (2021) Effect of process parameters on machining of Al -TiC metal matrix composites using RSM. Materials Today: Proceedings, 46. pp. 3282-3287. ISSN 22147853

Anbuchezhiyan, G. and Mohan, B. and Senthilkumar, N. and Pugazhenthi, R. (2021) Synthesis and Characterization of Silicon Nitride Reinforced Al–Mg–Zn Alloy Composites. Metals and Materials International, 27 (8). pp. 3058-3069. ISSN 1598-9623

Anbuchezhiyan, G. and Mohan, B. and Kathiresan, S. and Pugazenthi, R. (2021) Influence of microstructure and mechanical properties of TiC reinforced magnesium nano composites. Materials Today: Proceedings, 27. pp. 1530-1534. ISSN 22147853

Jayakanth, J.J. and Mamidi, Vamsi Krishna and Pugazhenthi, R. and Anbuchezhiyan, G. and Ponshanmugakumar, A. (2021) An investigation on wear properties of SiC/WC strengthened aluminium alloy hybrid composites. Materials Today: Proceedings, 46. pp. 3542-3545. ISSN 22147853

Book Section

Balamurali, P. and Karthikeyan, S. and Anbuchezhiyan, G. and Pugazhenthi, R. (2022) Experimental Investigation and Optimization of Cryogenically Treated Titanium Grade-2 Alloy in Electrical Discharge Machining. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 107-119.